kernel/include/dt-bindings/pinctrl, branch linux-5.1.y

Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-03-11T18:12:50Z

Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ...

pinctrl: at91: add slewrate support for SAM9X60

2019-02-08T12:07:03Z

Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea Acked-by: Ludovic Desroches Signed-off-by: Linus Walleij

mfd: lochnagar: Add initial binding documentation

2019-02-07T10:43:55Z

Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones

Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-01-01T21:19:16Z

Pull pin control updates from Linus Walleij: "We have no core changes but lots of incremental development in drivers all over the place: Renesas, NXP, Mediatek and Actions Semiconductor keep churning out new SoCs. I have some subtree maintainers for Renesas and Intel helping out to keep down the load, it's been working smoothly (Samsung also have a subtree but it was not used this cycle.) New drivers: - NXP (ex Freescale) i.MX 8 QXP SoC driver. - Mediatek MT6797 SoC driver. - Mediatek MT7629 SoC driver. - Actions Semiconductor S700 SoC driver. - Renesas RZ/A2 SoC driver. - Allwinner sunxi suniv F1C100 SoC driver. - Qualcomm PMS405 PMIC driver. - Microsemi Ocelot Jaguar2 SoC driver. Improvements: - Some RT improvements (using raw spinlocks where appropriate). - A lot of new pin sets on the Renesas PFC pin controllers. - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO chips, and Xway. - Major modernization of the Intel pin control drivers. - STM32 pin control driver will now synchronize usage of pins with another CPU using a hardware spinlock" * tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits) dt-bindings: arm: fsl-scu: add imx8qm pinctrl support pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ pinctrl: imx-scu: Depend on IMX_SCU pinctrl: ocelot: Add dependency on HAS_IOMEM pinctrl: ocelot: add MSCC Jaguar2 support pinctrl: bcm: ns: support updated DT binding as syscon subnode dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon MAINTAINERS: merge at91 pinctrl entries pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP pinctrl: uniphier: constify uniphier_pinctrl_socdata pinctrl: mediatek: improve Kconfig dependencies pinctrl: msm: mark PM functions as __maybe_unused dt-bindings: pinctrl: sunxi: Add supply properties pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length ...

dt-bindings: arm: fsl-scu: add imx8qm pinctrl support

2018-12-27T09:42:11Z

Update binding doc to support imx8qm pinctrl. Cc: Rob Herring Cc: Stefan Agner Cc: Shawn Guo Cc: Sascha Hauer Cc: Fabio Estevam Cc: Mark Rutland Cc: devicetree@vger.kernel.org Cc: Pengutronix Kernel Team Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij

dt-bindings: pinctrl: k3: Introduce pinmux definitions

2018-12-14T07:56:43Z

The dt-bindings header for TI K3 AM6 SoCs define a set of macros for defining pinmux configs in human readable form, instead of raw-coded hex values. Signed-off-by: Vignesh R Acked-by: Linus Walleij Reviewed-by: Rob Herring Acked-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Tero Kristo

Merge tag 'sh-pfc-for-v4.21-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

2018-11-25T22:53:01Z

pinctrl: sh-pfc: Updates for v4.21 - Fix VIN (Video IN) versioned groups on R-Car V2H, H3, and M3-W, - Add I2C[0-3], DU1, VIN, QSPI1, and SDHI pin groups on RZ/G1C, - Add audio, SDHI, VIN, HSCIF, and CAN(FD) support on R-Car E3, - Add QSPI pin groups on R-Car V3M and V3H, - Add VIN and CAN(FD) pin groups on R-Car M3-N, - Add I2C[035] pin groups on R-Car H3 and M3-W, - Add pinctrl and GPIO support for the new RZ/A2M (R7S9210) SoC, - Small cleanups, - Maintainership updates.

dt-bindings: pinctrl: Add RZ/A2 pinctrl and GPIO

2018-11-23T08:29:24Z

Add device tree binding documentation and header file for Renesas R7S9210 (RZ/A2) SoCs. Signed-off-by: Chris Brandt Reviewed-by: Rob Herring Reviewed-by: Jacopo Mondi Signed-off-by: Geert Uytterhoeven

pinctrl: bcm2835: Switch to SPDX identifier

2018-11-16T22:13:03Z

Adopt the SPDX license identifier headers to ease license compliance management. Cc: Simon Arlott Cc: Stephen Warren Signed-off-by: Stefan Wahren Reviewed-by: Eric Anholt Signed-off-by: Linus Walleij

dt-bindings: pinctrl: Add devicetree bindings for MT6797 SoC Pinctrl

2018-11-15T10:03:56Z

Add devicetree bindings for Mediatek MT6797 SoC Pin Controller. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Linus Walleij