kernel/include/dt-bindings/gpio, branch linux-4.16.y

Merge tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2018-02-02T22:22:53Z

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-02-02T00:07:54Z

Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...

dt-bindings: gpio: Add ASPEED constants

2017-12-21T03:33:14Z

These are used to by the device tree to map pin numbers to constants required by the GPIO bindings. Reviewed-by: Rob Herring Signed-off-by: Joel Stanley

gpio: gpiolib: Generalise state persistence beyond sleep

2017-12-02T21:42:34Z

General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery Reviewed-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Linus Walleij

pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC

2017-11-30T13:29:38Z

Add new pinctrl driver for Amlogic's Meson-AXG SoC. Reviewed-by: Neil Armstrong Signed-off-by: Xingyu Chen Signed-off-by: Yixun Lan Reviewed-by: Jerome Brunet Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2017-11-16T18:57:11Z

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...

Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2017-11-15T01:23:44Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...

Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into devel

2017-11-09T08:38:42Z

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

dt-bindings: gpio: uniphier: add UniPhier GPIO binding

2017-10-23T08:36:58Z

This GPIO controller is used on UniPhier SoC family. The vendor specific property "socionext,interrupt-ranges" is for specifying interrupt mapping to the parent interrupt controller because the mapping is not contiguous. It works like "ranges", but transforms "interrupts" instead of "reg". Signed-off-by: Masahiro Yamada Acked-by: Rob Herring Signed-off-by: Linus Walleij