kernel/include/drm/drm_gem_cma_helper.h, branch linux-5.2.y

drm: remove drmP.h from drm_gem_cma_helper.h

2019-01-09T21:54:08Z

With all dependencies fixed we can now remove drmP.h from drm_gem_cma_helper.h. It is replaced by the include files required, or forward declarations as appropritate. Signed-off-by: Sam Ravnborg Acked-by: Noralf Trønnes Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Sean Paul Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-13-sam@ravnborg.org

drm/cma-helper: Add DRM_GEM_CMA_VMAP_DRIVER_OPS

2018-11-20T13:57:25Z

This adds functionality to the CMA helper which ensures that the kernel virtual address is set on the CMA GEM object also for imported buffers. The drivers have been audited to ensure that none set ->vaddr on imported buffers, making the conditional dma_buf_vunmap() call in drm_gem_cma_free_object() safe. Signed-off-by: Noralf Trønnes Acked-by: Christian König Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-5-noralf@tronnes.org

Merge tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2017-12-03T19:42:49Z

Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...

drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1

2017-11-15T17:14:46Z

drm_gem_cma_prime_import_sg_table() will fail if the number of entries in the sg_table > 1. However, you can have a device that uses an IOMMU engine and can map a discontiguous buffer with multiple entries that have consecutive sg_dma_addresses, effectively making it contiguous. Allow for that scenario by testing the entries in the sg_table for contiguous coverage. Reviewed-by: Laurent Pinchart Signed-off-by: Liviu Dudau Signed-off-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/20171110133310.1225-1-Liviu.Dudau@arm.com

drm/cma-helper: Remove drm_fb_cma_debugfs_show()

2017-11-11T10:25:14Z

drm_fb_cma_debugfs_show() and drm_gem_cma_describe() are superseded by drm_framebuffer_debugfs_init() and drm_gem_cma_print_info(). Cc: Laurent Pinchart Signed-off-by: Noralf Trønnes Reviewed-by: Daniel Vetter Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-13-noralf@tronnes.org

drm/cma-helper: Add drm_gem_cma_print_info()

2017-11-11T10:22:46Z

Add drm_gem_cma_print_info() for debugfs printing struct drm_gem_cma_object specific info. Reviewed-by: Daniel Vetter Signed-off-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-8-noralf@tronnes.org

drm/cma-helper: Turn to_drm_gem_cma_obj() into a macro

2017-11-11T10:22:20Z

This allows the argument to be a const. The other option was to keep it an inline function and make the argument a const: static inline struct drm_gem_cma_object * to_drm_gem_cma_obj(const struct drm_gem_object *gem_obj) { return container_of(gem_obj, struct drm_gem_cma_object, base); } This will happily return a non-const pointer to the drm_gem_cma_object based on a const pointer to the contained drm_gem_object, thus creating const-safety problems. There was an attempt to fix the problem in the container_of() macro itself (see https://lkml.org/lkml/2017/5/19/381) but the patch seems to have fallen through the cracks. It would require turning this inline function into a macro. By making this a macro now, we will benefit from a possible future enhancement of container_of(). We don't loose type checking by doing this, container_of() takes care of that. Suggested-by: Laurent Pinchart Signed-off-by: Noralf Trønnes Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-7-noralf@tronnes.org

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset()

2017-08-16T18:21:24Z

There are no more users of drm_gem_cma_dumb_map_offset(), so remove it. Signed-off-by: Noralf Trønnes Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-20-git-send-email-noralf@tronnes.org

drm/cma: Fix recent regression of mmap() in the MMU case.

2017-04-18T19:25:37Z

The stub get_unmapped_area() function was actually getting called, so all of our mmap()s failed. Cc: Yannick Fertre Fixes: 97bf3a9aa60f ("drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area") Signed-off-by: Eric Anholt Link: http://patchwork.freedesktop.org/patch/msgid/20170417233124.18420-1-eric@anholt.net Reviewed-by: Daniel Vetter