kernel/include/drm/drm_fb_helper.h, branch linux-3.17.y

drm/fb_helper: allow adding/removing connectors later

2014-07-08T01:39:45Z

This is required to get fbcon probing to work on new connectors, callers should acquire the mode config lock before calling these. Reviewed-by: Todd Previte Signed-off-by: Dave Airlie

drm: Introduce drm_fb_helper_prepare()

2014-07-08T01:31:28Z

To implement hotplug detection in a race-free manner, drivers must call drm_kms_helper_poll_init() before hotplug events can be triggered. Such events can be triggered right after any of the encoders or connectors are initialized. At the same time, if the drm_fb_helper_hotplug_event() helper is used by a driver, then the poll helper requires some parts of the FB helper to be initialized to prevent a crash. At the same time, drm_fb_helper_init() requires information that is not necessarily available at such an early stage (number of CRTCs and connectors), so it cannot be used yet. Add a new helper, drm_fb_helper_prepare(), that initializes the bare minimum needed to allow drm_kms_helper_poll_init() to execute and any subsequent hotplug events to be processed properly. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding Signed-off-by: Dave Airlie

drm: Constify struct drm_fb_helper_funcs

2014-07-08T01:31:15Z

There's no need for this to be modifiable. Make it const so that it can be put into the .rodata section. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding Acked-by: Russell King Signed-off-by: Dave Airlie

drm: add drm_fb_helper_restore_fbdev_mode_unlocked()

2014-06-05T00:02:40Z

All drm_fb_helper_restore_fbdev_mode() call sites, save one, do the same locking. Simplify this into drm_fb_helper_restore_fbdev_mode_unlocked(). Signed-off-by: Rob Clark Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2014-04-08T16:52:16Z

Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...

treewide: Fix typo in Documentation/DocBook

2014-02-19T13:58:17Z

This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina

drm: export cmdline and preferred mode functions from fb helper

2014-02-12T22:42:16Z

This allows drivers to use them in custom initial_config functions. Signed-off-by: Jesse Barnes Acked-by: Dave Airlie Signed-off-by: Daniel Vetter

drm: Remove pointless '-' characters from drm_fb_helper documentation

2013-05-10T04:46:11Z

Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie

drm: Add kernel-doc for drm_fb_helper_funcs->initial_config

2013-05-10T04:46:07Z

Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie

Merge tag 'drm-intel-next-2013-04-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

2013-04-16T03:03:47Z

Daniel writes: Since I expect Linus to open the merge window in about a week I guess this is the last i915 feature pull for 3.10. Highlights: Updated testing tree for -next. Highlights: - Corner case fixes discovered with static analyzers (Damien). - More fixes to combat unclaimed register errors on Haswell (Paulo). - Some small fixes to the gpu turbo code (Rodrigo+Ben), Ben has more fixes for overclocking support pending. - More prep work for fastboot from Chris. - VT-switchless suspend/resume from Jesse. - The prep work of Egbert Eich's hpd irq storm handling. Hopefully we can squeeze in the actual storm handling code for 3.10 ... - More convenience helpers for Imre's sg iterator. Core parts acked by Andrew Morton. - A bit of backlight code cleanup from Jani. - Fixed ilk gpu reset (Jesse). - Reduced color range handling fixes for VLV (Ville). The big item here is though the introduction of pipe_config to properly pre-compute the desired modeset state before touching the hw. Together with some very basic support to read out the current config from the hw and compare the state with the sw tracking. This is all prep work for more reliable fastboot, atomic modesets and other cool features. Stuff converted to the new world includes: - Most simple pipe attributes (reduce color range, pixel multiplier). - Pipe bpp/dither handling. - Some convenience flags like ->has_pch_encoder to simplify the code flow. - (Almost) DP clock handling, had to be reverted since part of a prep patch was lost in rebasing ... Expect a lot of patches for this throughout 3.11, there's tons of work till we have all state properly tracked for fastbooting to woExpect a lot of patches for this throughout 3.11, there's tons of work till we have all state properly tracked for fastbooting to work. For 3.10 I have a bunch of fixes queued up and I plan to send them all out at the end of this week. I need to shuffle patches in my -next queue a bit so that we don't but feature-y stuff in there, too. The main thing I'd like to sneak in is Egbert's hpd irq storm handling, which should be pretty low-risk since all the infrastructure work has landed already. I also have the oops fix pending, but that only mustered review before the w/e and giving how hairy that part of our modeset code is, I want to give it some more testing before forwarding. Note: annarchy.fd.o seems to run out of disk space, so couldn't push the usual for-airlied branch. Tag should work though. Note 2: I've had to do a backmerge since conflicts grew too ugly, but the upstream -rc I've backmerged is already in your drm-next. * tag 'drm-intel-next-2013-04-06' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits) drm/i915: info level for simulated gpu hang dmesg notice drm/i915: revert eDP bpp clamping code changes Revert "drm/i915: fix DP get_hw_state return value" drm/i915: Don't use the HDMI port color range bit on Valleyview drm/i915: Set PIPECONF color range bit on Valleyview drm/i915: extract i9xx_set_pipeconf drm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900 drm/i915: create pipe_config->dpll for clock state drm/i915: hw readout support for ->has_pch_encoders drm/i915: add hw state readout/checking for pipe_config drm/i915: rip out superflous is_dp&is_cpu_edp tracking drm/i915: remove leaky eDP functions drm/i915: track dp target_clock in pipe_config drm/i915: move dp_m_n computation to dp_encoder->compute_config drm/i915: clear up the fdi/dp set_m_n confusion drm/i915: Fix sdvo connector get_hw_state function drm/i915: drop DPFLIPSTAT enables on VLV v3 drm/i915: add Punit read/write routines for VLV v2 drm/i915: panel power sequencing for VLV eDP v2 drm/i915/dp: fix up VLV DP handling v2 ...