kernel/include/acpi/acpi_bus.h, branch linux-5.1.y

Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-10-25T13:50:48Z

Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...

ACPI / property: Allow multiple property compatible _DSD entries

2018-10-02T21:04:40Z

It is possible to have _DSD entries where the data is compatible with device properties format but are using different GUID for various reasons. In addition to that there can be many such _DSD entries for a single device such as for PCIe root port used to host a Thunderbolt hierarchy: Scope (\_SB.PCI0.RP21) { Name (_DSD, Package () { ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () {"HotPlugSupportInD3", 1} }, ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () {"ExternalFacingPort", 1}, Package () {"UID", 0 } } }) } More information about these new _DSD entries can be found in: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports To make these available for drivers via unified device property APIs, modify ACPI property core so that it supports multiple _DSD entries organized in a linked list. We also store GUID of each _DSD entry in struct acpi_device_properties in case there is need to differentiate between entries. The supported GUIDs are then listed in prp_guids array. Signed-off-by: Mika Westerberg Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki Acked-by: Sakari Ailus

dma-mapping: remove dma_deconfigure

2018-09-08T09:19:28Z

This goes through a lot of hooks just to call arch_teardown_dma_ops. Replace it with a direct call instead. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use

2018-04-04T13:42:49Z

Currently the ACPI scan has special handling for serial bus slaves, in that it makes it the responsibility of the slave device's parent to enumerate the device. To support other types of slave devices which require the same special handling but where the bus is not strictly a serial bus, such as devices on the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to acpi_device_enumeration_by_parent(), so that the name can fit the wider purpose. Also rename the associated device flag acpi_device_flags.serial_bus_slave to .enumeration_by_parent. Signed-off-by: John Garry Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki

ACPI: utils: Introduce acpi_dev_get_first_match_name()

2018-01-09T23:41:43Z

Sometimes the user wants to have device name of the match rather than just checking if device present or not. To make life easier for such users introduce acpi_dev_get_first_match_name() helper based on code for acpi_dev_present(). For example, GPIO driver for Intel Merrifield needs to know the device name of pin control to be able to apply GPIO mapping table to the proper device. To be more consistent with the purpose rename struct acpi_dev_present_info -> struct acpi_dev_match_info acpi_dev_present_cb() -> acpi_dev_match_cb() in the utils.c file. Tested-by: Pierre-Louis Bossart Signed-off-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-ec' into acpi

2017-11-30T12:37:29Z

* acpi-ec: ACPI / EC: Fix regression related to PM ops support in ECDT device

ACPI / EC: Fix regression related to PM ops support in ECDT device

2017-11-20T23:13:02Z

On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga Tested-by: Luya Tshimbalanga Cc: 4.9+ # 4.9+ Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPI / scan: Fix enumeration for special UART devices

2017-10-20T12:24:44Z

UART devices is expected to be enumerated by SerDev subsystem. During ACPI scan, serial devices behind SPI, I2C or UART buses are not enumerated, allowing them to be enumerated by their respective parents. Rename *spi_i2c_slave* to *serial_bus_slave* as this will be used for serial devices on serial buses (SPI, I2C or UART). On Macs an empty ResourceTemplate is returned for uart slaves. Instead the device properties "baud", "parity", "dataBits", "stopBits" are provided. Add a check for "baud" in acpi_is_serial_bus_slave(). Signed-off-by: Frédéric Danis Reviewed-by: Sebastian Reichel Tested-by: Ronald Tschalär Tested-by: Peter Y. Chuang Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again

2017-09-19T20:42:31Z

Due to commit db3e50f3234b (device property: Get rid of struct fwnode_handle type field), ACPI_HANDLE() inadvertently became a GPL-only call. The call path that led to that was: ACPI_HANDLE() ACPI_COMPANION() to_acpi_device_node() is_acpi_device_node() acpi_device_fwnode_ops DECLARE_ACPI_FWNODE_OPS(acpi_device_fwnode_ops); ...and the new DECLARE_ACPI_FWNODE_OPS() includes EXPORT_SYMBOL_GPL, whereas previously it was a static struct. In order to avoid changing any of that, let's instead provide ever so slightly better encapsulation of those struct fwnode_operations instances. Those do not really need to be directly used in inline function calls in header files. Simply moving two small functions (is_acpi_device_node and is_acpi_data_node) out of acpi_bus.h, and into a .c file, does that. That leaves the internals of struct fwnode_operations as GPL-only (which I think was the intent all along), but un-breaks any driver code out there that relies on the ACPI subsystem's being (historically) an EXPORT_SYMBOL-usable system. By that, I mean, ACPI_HANDLE() and other basic ACPI calls were non-GPL-protected. Also, while I'm there, remove a tiny bit of redundancy that was missed in the earlier commit, by having is_acpi_node() use the other two routines, instead of checking fwnode directly. Fixes: db3e50f3234b (device property: Get rid of struct fwnode_handle type field) Signed-off-by: John Hubbard Acked-by: Sakari Ailus Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:50:00Z

Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()