kernel/drivers, branch linux-6.18.y

drm/bridge: ti-sn65dsi86: Add support for DisplayPort mode with HPD

2026-03-19T15:08:51Z

commit 9133bc3f0564890218cbba6cc7e81ebc0841a6f1 upstream. Add support for DisplayPort to the bridge, which entails the following: - Get and use an interrupt for HPD; - Properly clear all status bits in the interrupt handler; Signed-off-by: John Ripple Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support

2026-03-19T15:08:49Z

[ Upstream commit 6465a8bbb0f6ad98aeb66dc9ea19c32c193a610b ] RK3576 is the first platform to introduce internal phase support, and subsequent platforms are expected to adopt a similar design. In this architecture, runtime suspend powers off the attached power domain, which resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0, SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and restored, a requirement that falls outside the scope of the dw_mmc core. Fixes: 59903441f5e4 ("mmc: dw_mmc-rockchip: Add internal phase support") Signed-off-by: Shawn Lin Tested-by: Marco Schirrmeister Reviewed-by: Heiko Stuebner Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc-rockchip: Add memory clock auto-gating support

2026-03-19T15:08:49Z

[ Upstream commit ff6f0286c896f062853552097220dd93961be9c4 ] Per design recommendations, the memory clock can be gated when there is no in-flight transfer, which helps save power. This feature is introduced alongside internal phase support, and this patch enables it. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson Stable-dep-of: 6465a8bbb0f6 ("mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/gud: fix NULL crtc dereference on display disable

2026-03-19T15:08:49Z

[ Upstream commit 7149be786da012afc6bae293d38f8c1fff1fb90d ] gud_plane_atomic_update() currently handles both crtc state and framebuffer updates - the complexity has led to a few accidental NULL pointer dereferences. Commit dc2d5ddb193e ("drm/gud: fix NULL fb and crtc dereferences on USB disconnect") [1] fixed an earlier dereference but planes can also be disabled in non-hotplug paths (e.g. display disables via the desktop environment). The drm_dev_enter() call would not cause an early return in those and subsequently oops on dereferencing crtc: BUG: kernel NULL pointer dereference, address: 00000000000005c8 CPU: 6 UID: 1000 PID: 3473 Comm: kwin_wayland Not tainted 6.18.2-200.vanilla.gud.fc42.x86_64 #1 PREEMPT(lazy) RIP: 0010:gud_plane_atomic_update+0x148/0x470 [gud] drm_atomic_helper_commit_planes+0x28e/0x310 drm_atomic_helper_commit_tail+0x2a/0x70 commit_tail+0xf1/0x150 drm_atomic_helper_commit+0x13c/0x180 drm_atomic_commit+0xb1/0xe0 info ? __pfx___drm_printfn_info+0x10/0x10 drm_mode_atomic_ioctl+0x70f/0x7c0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xae/0x100 drm_ioctl+0x2a8/0x550 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x7e/0x7f0 ? __ct_user_enter+0x56/0xd0 ? do_syscall_64+0x158/0x7f0 ? __ct_user_enter+0x56/0xd0 ? do_syscall_64+0x158/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Split out crtc handling from gud_plane_atomic_update() into atomic_enable() and atomic_disable() functions to delegate crtc state transitioning work to the DRM helpers. To preserve the gud state commit sequence [2], switch to the runtime PM version of drm_atomic_helper_commit_tail() which ensures that crtcs are enabled (hence sending the GUD_REQ_SET_CONTROLLER_ENABLE and GUD_REQ_SET_DISPLAY_ENABLE requests) before a framebuffer update is sent. [1] https://lore.kernel.org/all/20251231055039.44266-1-me@shenghaoyang.info/ [2] https://github.com/notro/gud/wiki/GUD-Protocol#display-state Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202601142159.0v8ilfVs-lkp@intel.com/ Fixes: 73cfd166e045 ("drm/gud: Replace simple display pipe with DRM atomic helpers") Cc: # 6.19.x Cc: # 6.18.x Signed-off-by: Shenghao Yang Reviewed-by: Thomas Zimmermann Acked-by: Ruben Wauters Signed-off-by: Ruben Wauters Link: https://patch.msgid.link/20260222054551.80864-1-me@shenghaoyang.info Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/gud: rearrange gud_probe() to prepare for function splitting

2026-03-19T15:08:49Z

[ Upstream commit b9e5e9d2c187b849e050d59823e8c834f78475ab ] gud_probe() is currently very large and does many things, including pipeline setup and feature detection, as well as having USB functions. This patch re-orders the code in gud_probe() to make it more organised and easier to split apart in the future. Signed-off-by: Ruben Wauters Reviewed-by: Thomas Zimmermann Link: https://lore.kernel.org/r/20251020140147.5017-1-rubenru09@aol.com/ Stable-dep-of: 7149be786da0 ("drm/gud: fix NULL crtc dereference on display disable") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

cxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch

2026-03-19T15:08:48Z

commit 93d0fcdddc9e7be9d4f42acbe57bc90dbb0fe75d upstream. Commit e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to cxl_pmem.ko") moves devm_cxl_add_nvdimm_bridge() into the cxl_pmem file, which has independent config compile options for built-in or module. The call from cxl_acpi_probe() is guarded by IS_ENABLED(CONFIG_CXL_PMEM), which evaluates to true for both =y and =m. When CONFIG_CXL_PMEM=m, a built-in cxl_acpi attempts to reference a symbol exported by a module, which fails to link. CXL_PMEM cannot simply be promoted to =y in this configuration because it depends on LIBNVDIMM, which may itself be =m. Add a Kconfig dependency to prevent CXL_ACPI from being built-in when CXL_PMEM is a module. This contrains CXL_ACPI to =m when CXL_PMEM=m, while still allowing CXL_ACPI to be freely configured when CXL_PMEM is either built-in or disabled. [ dj: Fix up commit reference formatting. ] Fixes: e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to cxl_pmem.ko") Signed-off-by: Keith Busch Reviewed-by: Jonathan Cameron Reviewed-by: Dan Williams Link: https://patch.msgid.link/20260305204057.1516948-1-kbusch@meta.com Signed-off-by: Dave Jiang Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue

2026-03-19T15:08:48Z

commit b795e68bf3073d67bebbb5a44d93f49efc5b8cc7 upstream. The logic used to abort the DMA ring contains several flaws: 1. The driver unconditionally issues a ring abort even when the ring has already stopped. 2. The completion used to wait for abort completion is never re-initialized, resulting in incorrect wait behavior. 3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which resets hardware ring pointers and disrupts the controller state. 4. If the ring is already stopped, the abort operation should be considered successful without attempting further action. Fix the abort handling by checking whether the ring is running before issuing an abort, re-initializing the completion when needed, ensuring that RING_CTRL_ENABLE remains asserted during abort, and treating an already stopped ring as a successful condition. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Fix race in DMA ring dequeue

2026-03-19T15:08:48Z

commit 1dca8aee80eea76d2aae21265de5dd64f6ba0f09 upstream. The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for multiple transfers that timeout around the same time. However, the function is not serialized and can race with itself. When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes incomplete transfers, and then restarts the ring. If another timeout triggers a parallel call into the same function, the two instances may interfere with each other - stopping or restarting the ring at unexpected times. Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to itself. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor

2026-03-19T15:08:48Z

commit ec3cfd835f7c4bbd23bc9ad909d2fdc772a578bb upstream. The internal control command descriptor used for no-op commands includes a Transaction ID (TID) field, but the no-op command constructed in hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a no-op descriptor without the expected TID. This bug has gone unnoticed because the TID is currently not validated in the no-op completion path, but the descriptor format requires it to be present. Add the missing TID field when generating a no-op descriptor so that its layout matches the defined command structure. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort

2026-03-19T15:08:48Z

commit b6d586431ae20d5157ee468d0ef62ad26798ef13 upstream. The DMA dequeue path attempts to restart the ring after aborting an in-flight transfer, but the current sequence is incomplete. The controller must be brought out of the aborted state and the ring control registers must be programmed in the correct order: first clearing ABORT, then re-enabling the ring and asserting RUN_STOP to resume operation. Add the missing controller resume step and update the ring control writes so that the ring is restarted using the proper sequence. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman