kernel/drivers, branch linux-4.16.y

vhost: fix info leak due to uninitialized memory

2018-06-25T23:54:06Z

commit 670ae9caaca467ea1bfd325cb2a5c98ba87f94ad upstream. struct vhost_msg within struct vhost_msg_node is copied to userspace. Unfortunately it turns out on 64 bit systems vhost_msg has padding after type which gcc doesn't initialize, leaking 4 uninitialized bytes to userspace. This padding also unfortunately means 32 bit users of this interface are broken on a 64 bit kernel which will need to be fixed separately. Fixes: CVE-2018-1118 Cc: stable@vger.kernel.org Reported-by: Kevin Easton Signed-off-by: Michael S. Tsirkin Reported-by: syzbot+87cfa083e727a224754b@syzkaller.appspotmail.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large

2018-06-25T23:54:06Z

commit d471b6b22d37bf9928c6d0202bdaaf76583b8b61 upstream. The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by: Jason Gerecke CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation

2018-06-25T23:54:06Z

commit ebeaa367548e9e92dd9374b9464ff6e7d157117b upstream. Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

iwlwifi: fw: harden page loading code

2018-06-25T23:54:05Z

commit 9039d985811d5b109b58b202b7594fd24e433fed upstream. The page loading code trusts the data provided in the firmware images a bit too much and may cause a buffer overflow or copy unknown data if the block sizes don't match what we expect. To prevent potential problems, harden the code by checking if the sizes we are copying are what we expect. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

irq_remapping: Use apic_ack_irq()

2018-06-25T23:54:04Z

commit 8a2b7d142e7ac477d52f5f92251e59fc136d7ddd upstream. To address the EBUSY fail of interrupt affinity settings in case that the previous setting has not been cleaned up yet, use the new apic_ack_irq() function instead of the special ir_ack_apic_edge() implementation which is merily a wrapper around ack_APIC_irq(). Preparatory change for the real fix Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup") Signed-off-by: Thomas Gleixner Tested-by: Song Liu Cc: Joerg Roedel Cc: Peter Zijlstra Cc: Song Liu Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis Cc: Borislav Petkov Cc: Tariq Toukan Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de Signed-off-by: Greg Kroah-Hartman

w1: mxc_w1: Enable clock before calling clk_get_rate() on it

2018-06-25T23:54:03Z

commit 955bc61328dc0a297fb3baccd84e9d3aee501ed8 upstream. According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by: Stefan Potyra Acked-by: Evgeniy Polyakov Cc: stable Signed-off-by: Greg Kroah-Hartman

nvme/pci: Sync controller reset for AER slot_reset

2018-06-25T23:54:03Z

commit cc1d5e749a2e1cf59fa940b976181e631d6985e1 upstream. AER handling expects a successful return from slot_reset means the driver made the device functional again. The nvme driver had been using an asynchronous reset to recover the device, so the device may still be initializing after control is returned to the AER handler. This creates problems for subsequent event handling, causing the initializion to fail. This patch fixes that by syncing the controller reset before returning to the AER driver, and reporting the true state of the reset. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199657 Reported-by: Alex Gagniuc Cc: Sinan Kaya Cc: Bjorn Helgaas Cc: stable@vger.kernel.org Tested-by: Alex Gagniuc Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk

2018-06-25T23:54:02Z

commit 2cfce3a86b64b53f0a70e92a6a659c720c319b45 upstream. Commit 184add2ca23c ("libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs. This has lead to several reports of users of that SSD where LPM was working fine and who know have a significantly increased idle power consumption on their laptops. Likely there is another problem on the T450s from the original reporter which gets exposed by the uncore reaching deeper sleep states (higher PC-states) due to LPM being enabled. The problem as reported, a hardfreeze about once a day, already did not sound like it would be caused by LPM and the reports of the SSD working fine confirm this. The original reporter is ok with dropping the quirk. A X250 user has reported the same hard freeze problem and for him the problem went away after unrelated updates, I suspect some GPU driver stack changes fixed things. TL;DR: The original reporters problem were triggered by LPM but not an LPM issue, so drop the quirk for the SSD in question. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones Cc: Lorenzo Dalrio Reported-by: Lorenzo Dalrio Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Acked-by: "Richard W.M. Jones" Signed-off-by: Greg Kroah-Hartman

libata: zpodd: small read overflow in eject_tray()

2018-06-25T23:54:02Z

commit 18c9a99bce2a57dfd7e881658703b5d7469cc7b9 upstream. We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Fixes: 213342053db5 ("libata: handle power transition of ODD") Signed-off-by: Dan Carpenter Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

cpufreq: governors: Fix long idle detection logic in load calculation

2018-06-25T23:54:02Z

commit 7592019634f8473f0b0973ce79297183077bdbc2 upstream. According to current code implementation, detecting the long idle period is done by checking if the interval between two adjacent utilization update handlers is long enough. Although this mechanism can detect if the idle period is long enough (no utilization hooks invoked during idle period), it might not cover a corner case: if the task has occupied the CPU for too long which causes no context switches during that period, then no utilization handler will be launched until this high prio task is scheduled out. As a result, the idle_periods field might be calculated incorrectly because it regards the 100% load as 0% and makes the conservative governor who uses this field confusing. Change the detection to compare the idle_time with sampling_rate directly. Reported-by: Artem S. Tashkinov Signed-off-by: Chen Yu Acked-by: Viresh Kumar Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman