kernel/drivers/usb, branch linux-6.8.y

usb: typec: tipd: fix event checking for tps6598x

2024-05-25T14:28:39Z

commit 409c1cfb5a803f3cf2d17aeaf75c25c4be951b07 upstream. The current interrupt service routine of the tps6598x only reads the first 64 bits of the INT_EVENT1 and INT_EVENT2 registers, which means that any event above that range will be ignored, leaving interrupts unattended. Moreover, those events will not be cleared, and the device will keep the interrupt enabled. This issue has been observed while attempting to load patches, and the 'ReadyForPatch' field (bit 81) of INT_EVENT1 was set. Given that older versions of the tps6598x (1, 2 and 6) provide 8-byte registers, a mechanism based on the upper byte of the version register (0x0F) has been included. The manufacturer has confirmed [1] that this byte is always 0 for older versions, and either 0xF7 (DH parts) or 0xF9 (DK parts) is returned in newer versions (7 and 8). Read the complete INT_EVENT registers to handle all interrupts generated by the device and account for the hardware version to select the register size. Link: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1346521/tps65987d-register-command-to-distinguish-between-tps6591-2-6-and-tps65987-8 [1] Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-2-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman

usb: typec: tipd: fix event checking for tps25750

2024-05-25T14:28:39Z

commit d64adb0f41e62f91fcfdf0e0d9d5bfa714db0d23 upstream. In its current form, the interrupt service routine of the tps25750 checks the event flags in the lowest 64 bits of the interrupt event register (event[0]), but also in the upper part (event[1]). Given that all flags are defined as BIT() or BIT_ULL(), they are restricted to the first 64 bits of the INT_EVENT1 register. Including the upper part of the register can lead to false positives e.g. if the event 64 bits above the one being checked is set, but the one being checked is not. Restrict the flag checking to the first 64 bits of the INT_EVENT1 register. Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20240429-tps6598x_fix_event_handling-v3-1-4e8e58dce489@wolfvision.net Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: displayport: Fix potential deadlock

2024-05-25T14:28:39Z

commit b791a67f68121d69108640d4a3e591d210ffe850 upstream. The function ucsi_displayport_work() does not access the connector, so it also must not acquire the connector lock. This fixes a potential deadlock scenario: ucsi_displayport_work() -> lock(&con->lock) typec_altmode_vdm() dp_altmode_vdm() dp_altmode_work() typec_altmode_enter() ucsi_displayport_enter() -> lock(&con->lock) Reported-by: Mathias Nyman Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Wait unconditionally after issuing EndXfer command

2024-05-25T14:28:39Z

commit 1d26ba0944d398f88aaf997bda3544646cf21945 upstream. Currently all controller IP/revisions except DWC3_usb3 >= 310a wait 1ms unconditionally for ENDXFER completion when IOC is not set. This is because DWC_usb3 controller revisions >= 3.10a supports GUCTL2[14: Rst_actbitlater] bit which allows polling CMDACT bit to know whether ENDXFER command is completed. Consider a case where an IN request was queued, and parallelly soft_disconnect was called (due to ffs_epfile_release). This eventually calls stop_active_transfer with IOC cleared, hence send_gadget_ep_cmd() skips waiting for CMDACT cleared during EndXfer. For DWC3 controllers with revisions >= 310a, we don't forcefully wait for 1ms either, and we proceed by unmapping the requests. If ENDXFER didn't complete by this time, it leads to SMMU faults since the controller would still be accessing those requests. Fix this by ensuring ENDXFER completion by adding 1ms delay in __dwc3_stop_active_transfer() unconditionally. Cc: stable@vger.kernel.org Fixes: b353eb6dc285 ("usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer") Signed-off-by: Prashanth K Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20240502044103.1066350-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Check for port partner validity before consuming it

2024-05-17T10:15:00Z

commit ae11f04b452b5205536e1c02d31f8045eba249dd upstream. typec_register_partner() does not guarantee partner registration to always succeed. In the event of failure, port->partner is set to the error value or NULL. Given that port->partner validity is not checked, this results in the following crash: Unable to handle kernel NULL pointer dereference at virtual address xx pc : run_state_machine+0x1bc8/0x1c08 lr : run_state_machine+0x1b90/0x1c08 .. Call trace: run_state_machine+0x1bc8/0x1c08 tcpm_state_machine_work+0x94/0xe4 kthread_worker_fn+0x118/0x328 kthread+0x1d0/0x23c ret_from_fork+0x10/0x20 To prevent the crash, check for port->partner validity before derefencing it in all the call sites. Cc: stable@vger.kernel.org Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision") Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: unregister existing source caps before re-registration

2024-05-17T10:15:00Z

commit 230ecdf71a644c9c73e0e6735b33173074ae3f94 upstream. Check and unregister existing source caps in tcpm_register_source_caps function before registering new ones. This change fixes following warning when port partner resends source caps after negotiating PD contract for the purpose of re-negotiation. [ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities' [ 343.135071][ T151] Call trace: [ 343.135076][ T151] dump_backtrace+0xe8/0x108 [ 343.135099][ T151] show_stack+0x18/0x24 [ 343.135106][ T151] dump_stack_lvl+0x50/0x6c [ 343.135119][ T151] dump_stack+0x18/0x24 [ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140 [ 343.135137][ T151] kobject_add_internal+0x228/0x424 [ 343.135146][ T151] kobject_add+0x94/0x10c [ 343.135152][ T151] device_add+0x1b0/0x4c0 [ 343.135187][ T151] device_register+0x20/0x34 [ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c [ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8 [ 343.135216][ T151] kthread_worker_fn+0x11c/0x260 [ 343.135227][ T151] kthread+0x114/0x1bc [ 343.135235][ T151] ret_from_fork+0x10/0x20 [ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory. Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Mark Brown Signed-off-by: Amit Sunil Dhamne Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: clear pd_event queue in PORT_RESET

2024-05-17T10:14:59Z

commit bf20c69cf3cf9c6445c4925dd9a8a6ca1b78bfdf upstream. When a Fast Role Swap control message attempt results in a transition to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event. If the event is queued but processed after the tcpm_reset_port() call in the PORT_RESET state, then the following occurs: 1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and sinking state 2. tcpm_pd_event_handler() turns VBUS on before the port is in the default state. 3. The port resolves as a sink. In the SNK_DISCOVERY state, tcpm_set_charge() cannot set vbus to charge. Clear pd events within PORT_RESET to get rid of non-applicable events. Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: Prevent phy suspend during init

2024-05-17T10:14:59Z

commit 6d735722063a945de56472bdc6bfcb170fd43b86 upstream. GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared during initialization. Suspend during initialization can result in undefined behavior due to clock synchronization failure, which often seen as core soft reset timeout. The programming guide recommended these bits to be cleared during initialization for DWC_usb3.0 version 1.94 and above (along with DWC_usb31 and DWC_usb32). The current check in the driver does not account if it's set by default setting from coreConsultant. This is especially the case for DRD when switching mode to ensure the phy clocks are available to change mode. Depending on the platforms/design, some may be affected more than others. This is noted in the DWC_usb3x programming guide under the above registers. Let's just disable them during driver load and mode switching. Restore them when the controller initialization completes. Note that some platforms workaround this issue by disabling phy suspend through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when they should not need to. Cc: stable@vger.kernel.org Fixes: 9ba3aca8fe82 ("usb: dwc3: Disable phy suspend after power-on reset") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-plat: Don't include xhci.h

2024-05-17T10:14:59Z

commit 4a237d55446ff67655dc3eed2d4a41997536fc4c upstream. The xhci_plat.h should not need to include the entire xhci.h header. This can cause redefinition in dwc3 if it selectively includes some xHCI definitions. This is a prerequisite change for a fix to disable suspend during initialization for dwc3. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/310acfa01c957a10d9feaca3f7206269866ba2eb.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Fix a race condition when processing setup packets.

2024-05-17T10:14:59Z

commit 0aea736ddb877b93f6d2dd8cf439840d6b4970a9 upstream. If the USB driver passes a pointer into the TRB buffer for creq, this buffer can be overwritten with the status response as soon as the event is queued. This can make the final check return USB_GADGET_DELAYED_STATUS when it shouldn't. Instead use the stored wLength. Fixes: 4d644abf2569 ("usb: gadget: f_fs: Only return delayed status when len is 0") Cc: stable Signed-off-by: Chris Wulff Link: https://lore.kernel.org/r/CO1PR17MB5419BD664264A558B2395E28E1112@CO1PR17MB5419.namprd17.prod.outlook.com Signed-off-by: Greg Kroah-Hartman