kernel/drivers/usb/serial/pl2303.h, branch linux-6.18.y

USB: serial: pl2303: add device id for Macrosilicon MS3020

2024-09-06T15:11:13Z

Add the device id for the Macrosilicon MS3020 which is a PL2303HXN based device. Signed-off-by: Junhao Xie Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: pl2303: add device id for HP LM930 Display

2022-05-05T11:31:03Z

Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: pl2303: add IBM device IDs

2022-03-04T08:52:09Z

IBM manufactures a PL2303 device for UPS communications. Add the vendor and product IDs so that the PL2303 driver binds to the device. Signed-off-by: Eddie James Signed-off-by: Joel Stanley Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com Cc: stable@vger.kernel.org [ johan: amend the SoB chain ] Signed-off-by: Johan Hovold

USB: serial: pl2303: add device id for ADLINK ND-6530 GC

2021-05-10T09:15:23Z

This adds the device id for the ADLINK ND-6530 which is a PL2303GC based device. Signed-off-by: Zolton Jheng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: pl2303: add device-id for HP GC device

2020-09-29T10:50:34Z

This is adds a device id for HP LD381 which is a pl2303GC-base device. Signed-off-by: Scott Chen Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: Use the correct style for SPDX License Identifier

2020-04-22T07:26:47Z

This patch corrects the SPDX License Identifier style in header files related to USB Serial device configuration. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Signed-off-by: Johan Hovold

USB: serial: pl2303: add device-id for HP LD381

2020-03-12T11:31:01Z

Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by: Scott Chen Cc: stable Signed-off-by: Johan Hovold

USB: serial: pl2303: add support for PL2303HXN

2019-10-23T08:52:16Z

Prolific has developed a new USB to UART chip: PL2303HXN PL2303HXN : PL2303GC/PL2303GS/PL2303GT/PL2303GL/PL2303GE/PL2303GB The Vendor request used by the PL2303HXN (TYPE_HXN) is different from the existing PL2303 series (TYPE_HX & TYPE_01). Therefore, different Vendor requests are used to issue related commands. 1. Added a new TYPE_HXN type in pl2303_type_data, and then executes new Vendor request,new flow control and other related instructions if TYPE_HXN is recognized. 2. Because the new PL2303HXN only accept the new Vendor request, the old Vendor request cannot be accepted (the error message will be returned) So first determine the TYPE_HX or TYPE_HXN through PL2303_READ_TYPE_HX_STATUS in pl2303_startup. 2.1 If the return message is "1", then the PL2303 is the existing TYPE_HX/ TYPE_01 series. The other settings in pl2303_startup are to continue execution. 2.2 If the return message is "not 1", then the PL2303 is the new TYPE_HXN series. The other settings in pl2303_startup are ignored. (PL2303HXN will directly use the default value in the hardware, no need to add additional settings through the software) 3. In pl2303_open: Because TYPE_HXN is different from the instruction of reset down/up stream used by TYPE_HX. Therefore, we will also execute different instructions here. 4. In pl2303_set_termios: The UART flow control instructions used by TYPE_HXN/TYPE_HX/TYPE_01 are different. Therefore, we will also execute different instructions here. 5. In pl2303_vendor_read & pl2303_vendor_write, since TYPE_HXN is different from the vendor request instruction used by TYPE_HX/TYPE_01, it will also execute different instructions here. 6. In pl2303_update_reg: TYPE_HXN used different register for flow control. Therefore, we will also execute different instructions here. Signed-off-by: Charles Yeh Signed-off-by: Johan Hovold

USB: serial: pl2303: add Allied Telesis VT-Kit3

2019-05-21T09:26:14Z

This is adds the vendor and device id for the AT-VT-Kit3 which is a pl2303-based device. Signed-off-by: Chris Packham Cc: stable Signed-off-by: Johan Hovold

USB: serial: pl2303: add new PID to support PL2303TB

2019-01-17T16:24:39Z

Add new PID to support PL2303TB (TYPE_HX) Signed-off-by: Charles Yeh Cc: stable Signed-off-by: Johan Hovold