kernel/drivers/usb/serial/pl2303.c, branch linux-6.5.y

USB: serial: return errors from break handling

2023-06-07T15:00:23Z

Start propagating errors to user space when setting the break state fails. This will be used by follow-on changes to also report when a driver or device does not support break control. Tested-by: Corey Minyard Signed-off-by: Johan Hovold

usb: serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35Z

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: add support for more HXN (G) types

2022-06-22T06:52:03Z

Add support for further HXN (G) type devices (GT variant, GL variant, GS variant and GR) and document the bcdDevice mapping. Note that the TA and TB types use the same bcdDevice as some GT and GE variants, respectively, but that the HX status request can be used to determine which is which. Also note that we currently do not distinguish between the various HXN (G) types in the driver but that this may change eventually (e.g. when adding GPIO support). Reported-by: Charles Yeh Link: https://lore.kernel.org/r/YrF77b9DdeumUAee@hovoldconsulting.com Cc: stable@vger.kernel.org # 5.13 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-06-03T18:17:49Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...

USB: serial: pl2303: fix type detection for odd device

2022-05-18T11:57:00Z

At least one pl2303 device has a bcdUSB of 1.0.1 which most likely was was intended as 1.1. Allow bcdDevice 1.0.1 but interpret it as 1.1. Fixes: 1e9faef4d26d ("USB: serial: pl2303: fix HX type detection") Cc: stable@vger.kernel.org # 5.13 Link: https://lore.kernel.org/linux-usb/CAJixRzqf4a9-ZKZDgWxicc_BpfdZVE9qqGmkiO7xEstOXUbGvQ@mail.gmail.com Reported-by: Gary van der Merwe Link: https://lore.kernel.org/r/20220517161736.13313-1-johan@kernel.org Signed-off-by: Johan Hovold

USB: serial: pl2303: add device id for HP LM930 Display

2022-05-05T11:31:03Z

Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: pl2303: fix GS type detection

2022-03-07T14:41:29Z

At least some PL2303GS have a bcdDevice of 0x605 instead of 0x100 as the datasheet claims. Add it to the list of known release numbers for the HXN (G) type. Fixes: 894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection") Reported-by: Matyáš Kroupa Link: https://lore.kernel.org/r/165de6a0-43e9-092c-2916-66b115c7fbf4@gmail.com Cc: stable@vger.kernel.org # 5.13 Signed-off-by: Johan Hovold

USB: serial: pl2303: add IBM device IDs

2022-03-04T08:52:09Z

IBM manufactures a PL2303 device for UPS communications. Add the vendor and product IDs so that the PL2303 driver binds to the device. Signed-off-by: Eddie James Signed-off-by: Joel Stanley Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com Cc: stable@vger.kernel.org [ johan: amend the SoB chain ] Signed-off-by: Johan Hovold

USB: serial: pl2303: fix GC type detection

2021-11-23T09:49:18Z

At least some PL2303GC have a bcdDevice of 0x105 instead of 0x100 as the datasheet claims. Add it to the list of known release numbers for the HXN (G) type. Note the chip type could only be determined indirectly based on its package being of QFP type, which appears to only be available for PL2303GC. Fixes: 894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection") Cc: stable@vger.kernel.org # 5.13 Reported-by: Anton Lundin Link: https://lore.kernel.org/r/20211123071613.GZ108031@montezuma.acc.umu.se Link: https://lore.kernel.org/r/20211123091017.30708-1-johan@kernel.org Signed-off-by: Johan Hovold

USB: serial: pl2303: fix GL type detection

2021-08-30T07:21:55Z

At least some PL2303GL have a bcdDevice of 0x405 instead of 0x100 as the datasheet claims. Add it to the list of known release numbers for the HXN (G) type. Fixes: 894758d0571d ("USB: serial: pl2303: tighten type HXN (G) detection") Signed-off-by: Robert Marko Cc: stable@vger.kernel.org # 5.13 Link: https://lore.kernel.org/r/20210826110239.5269-1-robert.marko@sartura.hr Signed-off-by: Johan Hovold