kernel/drivers/usb/serial/option.c, branch linux-3.2.y

USB: serial: option: adding support for YUGA CLM920-NC5

2018-03-03T15:50:49Z

commit 3920bb713038810f25770e7545b79f204685c8f2 upstream. This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by: Taiyi Wu Signed-off-by: SZ Lin (林上智) Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings

USB: serial: option: add Quectel BG96 id

2018-03-03T15:50:39Z

commit c654b21ede93845863597de9ad774fd30db5f2ab upstream. Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to option.c to allow DIAG,GPS,AT and modem communication with the BG96. Signed-off-by: Sebastian Sjoholm Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings

USB: serial: option: add support for TP-Link LTE module

2018-01-01T20:50:49Z

commit 837ddc4793a69b256ac5e781a5e729b448a8d983 upstream. This commit adds support for TP-Link LTE mPCIe module is used in in TP-Link MR200v1, MR6400v1 and v2 routers. Signed-off-by: Henryk Heisig Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings

USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems

2017-07-18T17:38:33Z

commit 6e9f44eaaef0df7b846e9316fa9ca72a02025d44 upstream. Add Quectel UC15, UC20, EC21, and EC25. The EC20 is handled by qcserial due to a USB VID/PID conflict with an existing Acer device. Signed-off-by: Dan Williams Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings

USB: serial: option: add device ID for HP lt2523 (Novatel E371)

2017-03-16T02:18:46Z

commit 5d03a2fd2292e71936c4235885c35ccc3c94695b upstream. Yet another laptop vendor rebranded Novatel E371. Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings

USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041

2017-03-16T02:18:30Z

commit 5b09eff0c379002527ad72ea5ea38f25da8a8650 upstream. This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by: Daniele Palmas Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

USB: serial: option: add WeTelecom 0x6802 and 0x6803 products

2016-11-20T01:01:35Z

commit 40d9c32525cba79130612650b1abc47c0c0f19a8 upstream. These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by: Aleksandr Makarov Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings

USB: serial: option: add WeTelecom WM-D200

2016-11-20T01:01:34Z

commit 6695593e4a7659db49ac6eca98c164f7b5589f72 upstream. Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Aleksandr Makarov Signed-off-by: Johan Hovold [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

USB: serial: option: add D-Link DWM-156/A3

2016-11-20T01:01:31Z

commit cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 upstream. The device has four interfaces; the three serial ports ought to be handled by this driver: 00 Diagnostic interface serial port 01 NMEA device serial port 02 Mass storage (sd card) 03 Modem serial port The other product ids listed in the Windows driver are present already. Signed-off-by: Lubomir Rintel Signed-off-by: Johan Hovold [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

USB: serial: option: add support for Telit LE910 PID 0x1206

2016-11-20T01:01:26Z

commit 3c0415fa08548e3bc63ef741762664497ab187ed upstream. This patch adds support for 0x1206 PID of Telit LE910. Since the interfaces positions are the same than the ones for 0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used. Signed-off-by: Daniele Palmas Signed-off-by: Johan Hovold Signed-off-by: Ben Hutchings