kernel/drivers/usb/serial/cp210x.c, branch linux-6.18.y

treewide: rename GPIO set callbacks back to their original names

2025-08-07T08:07:06Z

The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski

USB: serial: cp210x: use new GPIO line value setter callbacks

2025-06-24T08:40:51Z

struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski Signed-off-by: Johan Hovold

USB: serial: cp210x: add Phoenix Contact UPS Device

2025-01-08T10:25:47Z

Phoenix Contact sells UPS Quint devices [1] with a custom datacable [2] that embeds a Silicon Labs converter: Bus 001 Device 003: ID 1b93:1013 Silicon Labs Phoenix Contact UPS Device Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1b93 idProduct 0x1013 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Phoenix Contact UPS Device iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 Phoenix Contact UPS Device Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 [1] https://www.phoenixcontact.com/en-pc/products/power-supply-unit-quint-ps-1ac-24dc-10-2866763 [2] https://www.phoenixcontact.com/en-il/products/data-cable-preassembled-ifs-usb-datacable-2320500 Reported-by: Giuseppe Corbelli Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: drop driver owner initialization

2024-08-26T13:28:25Z

Core in usb_serial_register_drivers() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Johan Hovold

USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113M

2024-03-05T06:51:37Z

TDK NC0110013M and MM0110113M have custom USB IDs for CP210x, so we need to add them to the driver. Signed-off-by: Toru Katagiri Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: cp210x: add ID for MGP Instruments PDS100

2024-03-04T10:15:37Z

The radiation meter has the text MGP Instruments PDS-100G or PDS-100GN produced by Mirion Technologies. Tested by forcing the driver association with echo 10c4 863c > /sys/bus/usb-serial/drivers/cp210x/new_id and then setting the serial port in 115200 8N1 mode. The device announces ID_USB_VENDOR_ENC=Silicon\x20Labs and ID_USB_MODEL_ENC=PDS100 Signed-off-by: Christian Häggström Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: add device ID for VeriFone adapter

2024-03-04T10:13:36Z

Add device ID for a (probably fake) CP2102 UART device. lsusb -v output: Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x11ca VeriFone Inc idProduct 0x0212 Verifone USB to Printer bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Verifone USB to Printer iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 iInterface 2 Verifone USB to Printer Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Cameron Williams Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: cp210x: add ID for IMST iM871A-USB

2024-01-30T15:03:16Z

The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB Wireless M-Bus USB-adapter. It is used to read wireless water, gas and electricity meters. Signed-off-by: Leonard Dallmayr Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: cp210x: disable break signalling on CP2105 SCI

2023-06-07T15:00:23Z

Only the first UART interface (ECI) on CP2105 supports break signalling. Return an error on requests for break state changes for the second interface (SCI) to avoid transmitting a garbage character and waiting when break is not supported. Tested-by: Corey Minyard Signed-off-by: Johan Hovold

USB: serial: return errors from break handling

2023-06-07T15:00:23Z

Start propagating errors to user space when setting the break state fails. This will be used by follow-on changes to also report when a driver or device does not support break control. Tested-by: Corey Minyard Signed-off-by: Johan Hovold