kernel/drivers/usb/host, branch linux-5.7.y

usb: xhci: Fix ASMedia ASM1142 DMA addressing

2020-08-11T13:35:30Z

commit ec37198acca7b4c17b96247697406e47aafe0605 upstream. I've confirmed that the ASMedia ASM1142 has the same problem as the ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA addresses when in fact it does not. As with the ASM2142/ASM3142, this can cause problems on systems where the upper bits matter, and adding the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue. Acked-by: Mathias Nyman Signed-off-by: Forest Crossman Cc: stable Link: https://lore.kernel.org/r/20200728042408.180529-3-cyrozap@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: define IDs for various ASMedia host controllers

2020-08-11T13:35:30Z

commit 1841cb255da41e87bed9573915891d056f80e2e7 upstream. Not all ASMedia host controllers have a device ID that matches its part number. #define some of these IDs to make it clearer at a glance which chips require what quirks. Acked-by: Mathias Nyman Signed-off-by: Forest Crossman Link: https://lore.kernel.org/r/20200728042408.180529-2-cyrozap@gmail.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: xhci: Fix ASM2142/ASM3142 DMA addressing

2020-07-29T08:19:55Z

commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream. The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA addresses, which can cause silent memory corruption or IOMMU errors on platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk to fix this issue. Signed-off-by: Forest Crossman Cc: stable Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: tegra: Fix allocation for the FPCI context

2020-07-29T08:19:55Z

commit 0b987032f8b58ef51cc8a042f46cc0cf1f277172 upstream. Commit 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore") is using the IPFS 'num_offsets' value when allocating memory for FPCI context instead of the FPCI 'num_offsets'. After commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") was added system suspend started failing on Tegra186. The kernel log showed that the Tegra XHCI driver was crashing on entry to suspend when attempting the save the USB context. On Tegra186, the IPFS context has a zero length but the FPCI content has a non-zero length, and because of the bug in the Tegra XHCI driver we are incorrectly allocating a zero length array for the FPCI context. The crash seen on entering suspend when we attempt to save the FPCI context and following commit cad064f1bd52 ("devres: handle zero size in devm_kmalloc()") this now causes a NULL pointer deference when we access the memory. Fix this by correcting the amount of memory we are allocating for FPCI contexts. Cc: stable@vger.kernel.org Fixes: 5c4e8d3781bc ("usb: host: xhci-tegra: Add support for XUSB context save/restore") Signed-off-by: Jon Hunter Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix the failure of bandwidth allocation

2020-07-29T08:19:55Z

commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream. The wMaxPacketSize field of endpoint descriptor may be zero as default value in alternate interface, and they are not actually selected when start stream, so skip them when try to allocate bandwidth. Cc: stable Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

xhci: Return if xHCI doesn't support LPM

2020-06-30T19:35:58Z

commit f0c472a6da51f9fac15e80fe2fd9c83b68754cff upstream. Just return if xHCI is quirked to disable LPM. We can save some time from reading registers and doing spinlocks. Add stable tag as we want this patch together with the next one, "Poll for U0 after disabling USB2 LPM" which fixes a suspend issue for some USB2 LPM devices Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

xhci: Fix enumeration issue when setting max packet size for FS devices.

2020-06-30T19:35:58Z

commit a73d9d9cfc3cfceabd91fb0b0c13e4062b6dbcd7 upstream. Unable to complete the enumeration of a USB TV Tuner device. Per XHCI spec (4.6.5), the EP state field of the input context shall be cleared for a set address command. In the special case of an FS device that has "MaxPacketSize0 = 8", the Linux XHCI driver does not do this before evaluating the context. With an XHCI controller that checks the EP state field for parameter context error this causes a problem in cases such as the device getting reset again after enumeration. When that field is cleared, the problem does not occur. This was found and fixed by Sasi Kumar. Cc: stable@vger.kernel.org Signed-off-by: Al Cooper Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

xhci: Fix incorrect EP_STATE_MASK

2020-06-30T19:35:58Z

commit dceea67058fe22075db3aed62d5cb62092be5053 upstream. EP_STATE_MASK should be 0x7 instead of 0xf xhci spec 6.2.3 shows that the EP state field in the endpoint context data structure consist of bits [2:0]. The old value included a bit from the next field which fortunately is a RsvdZ region. So hopefully this hasn't caused too much harm Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: host: ehci-exynos: Fix error check in exynos_ehci_probe()

2020-06-30T19:35:55Z

commit 44ed240d62736ad29943ec01e41e194b96f7c5e9 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 1bcc5aa87f04 ("USB: Add initial S5P EHCI driver") Cc: stable Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman

xhci: Poll for U0 after disabling USB2 LPM

2020-06-30T19:35:55Z

commit b3d71abd135e6919ca0b6cab463738472653ddfb upstream. USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman