kernel/drivers/usb/host/isp1362.h, branch linux-6.9.y

USB: host: isp1362: remove dentry pointer for debugfs

2021-03-10T08:37:15Z

There is no need to keep the dentry pointer around for the created debugfs file, as it is only needed when removing it from the system. When it is to be removed, ask debugfs itself for the pointer, to save on storage and make things a bit simpler. Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20210216144645.3813043-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

USB: host: isp1362: delete isp1362_show_regs()

2020-10-28T12:08:22Z

No one is calling this function, so it's pointless to keep around as it is triggering automated scanning tools to try to fix up the problems with it using in_interrupt(). So delete the thing. Reported-by: Thomas Gleixner Reported-by: Sebastian Andrzej Siewior Reported-by: Ahmed S. Darwish Reviewed-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20201028113107.2007742-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: host: isp1362: Mark the many unused ISP1362_REG entries as __maybe_unused

2020-07-03T08:18:40Z

It would seem a shame to strip out all of the unused register entries, since they can act as a fair source of documentation. Instead, mark them all as __maybe_unused to show the build system that this behaviour is known and intentional. Fixes the following kernel build warning(s): In file included from drivers/usb/host/isp1362-hcd.c:96: drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGALTTMR’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:199:1: note: in expansion of macro ‘ISP1362_REG’ 199 | ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGTIMER’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:198:1: note: in expansion of macro ‘ISP1362_REG’ 198 | ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINTENB’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:197:1: note: in expansion of macro ‘ISP1362_REG’ 197 | ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:196:1: note: in expansion of macro ‘ISP1362_REG’ 196 | ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGSTATUS’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:195:1: note: in expansion of macro ‘ISP1362_REG’ 195 | ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGCONTROL’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:194:1: note: in expansion of macro ‘ISP1362_REG’ 194 | ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCATLPORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:183:1: note: in expansion of macro ‘ISP1362_REG’ 183 | ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTLPORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:175:1: note: in expansion of macro ‘ISP1362_REG’ 175 | ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL1PORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:171:1: note: in expansion of macro ‘ISP1362_REG’ 171 | ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL0PORT’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:170:1: note: in expansion of macro ‘ISP1362_REG’ 170 | ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW); | ^~~~~~~~~~~ drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTDIS’ defined but not used [-Wunused-const-variable=] 59 | static isp1362_reg_t ISP1362_REG_##name = addr | ^~~~~~~~~~~~ drivers/usb/host/isp1362.h:77:1: note: in expansion of macro ‘ISP1362_REG’ 77 | ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW); | ^~~~~~~~~~~ Cc: "by L. Wassmann" Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20200702144625.2533530-20-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman

usb: isp1362: Spelling s/eclusive/exclusive/

2019-06-18T06:51:28Z

Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

usb: isp1362: remove blackfin arch glue

2018-03-26T13:57:14Z

The blackfin architecture is getting removed, and this is the last remaining architecture specific setting, so the various hacks can be removed now. From all I can tell, there are no remaining in-tree users of the driver, but it could be used by out-of-tree platform ports. I've marked the driver as 'depends on COMPILE_TEST', short of removing it outright. It was originally written for some ARM PXA machines using the same chip, but that platform never really worked and the code has been removed a long time ago. Acked-by: Greg Kroah-Hartman Acked-by: Aaron Wu Signed-off-by: Arnd Bergmann

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

USB: isp1362: move debug files from proc to debugfs

2013-07-24T21:43:05Z

Drivers should not be putting debug files in /proc/ that is what debugfs is for, so move the isp1362 driver's debug file to debugfs. Reviewed-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: isp1362: remove CONFIG_USB_DEBUG dependency

2013-07-23T23:35:17Z

Now that the debugging macros are cleaned up, just rely on the dynamic debug code in the kernel to do the debug messages for the driver. This lets debugging be enabled without having to rebuild the driver, an important thing for users that can not do it. Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: isp1362: remove _DBG() usage

2013-07-23T23:35:17Z

If you want a debug call, just make it, so move to using the already-there DBG() call. No need to make things more complex than they really need to be. Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: isp1362: remove unused _WARN_ON() calls

2013-07-23T23:35:17Z

Like _BUG_ON(), _WARN_ON() wasn't ever being used, so just delete it, as obviously things are working properly now (if not, we have bigger problems...) Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman