kernel/drivers/usb/gadget/udc, branch linux-6.9.y

usb: gadget: aspeed_udc: fix device address configuration

2024-07-05T07:38:09Z

commit dba7567c2fbbf10a4de2471cdb0e16e5572dc007 upstream. In the aspeed UDC setup, we configure the UDC hardware with the assigned USB device address. However, we have an off-by-one in the bitmask, so we're only setting the lower 6 bits of the address (USB addresses being 7 bits, and the hardware bitmask being bits 0:6). This means that device enumeration fails if the assigned address is greater than 64: [ 344.607255] usb 1-1: new high-speed USB device number 63 using ehci-platform [ 344.808459] usb 1-1: New USB device found, idVendor=cc00, idProduct=cc00, bcdDevice= 6.10 [ 344.817684] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 344.825671] usb 1-1: Product: Test device [ 344.831075] usb 1-1: Manufacturer: Test vendor [ 344.836335] usb 1-1: SerialNumber: 00 [ 349.917181] usb 1-1: USB disconnect, device number 63 [ 352.036775] usb 1-1: new high-speed USB device number 64 using ehci-platform [ 352.249432] usb 1-1: device descriptor read/all, error -71 [ 352.696740] usb 1-1: new high-speed USB device number 65 using ehci-platform [ 352.909431] usb 1-1: device descriptor read/all, error -71 Use the correct mask of 0x7f (rather than 0x3f), and generate this through the GENMASK macro, so we have numbers that correspond exactly to the hardware register definition. Fixes: 055276c13205 ("usb: gadget: add Aspeed ast2600 udc driver") Cc: stable@vger.kernel.org Reviewed-by: Neal Liu Reviewed-by: Andrew Jeffery Signed-off-by: Jeremy Kerr Link: https://lore.kernel.org/r/20240613-aspeed-udc-v2-1-29501ce9cb7a@codeconstruct.com.au Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: gadget: fsl: Initialize udc before using it

2024-04-05T06:08:37Z

fsl_ep_queue() is only called by usb_ep_queue() (as ep->ops->queue()). So _ep isn't NULL. As ep->ops->queue = fsl_ep_queue, the ep was initialized by struct_ep_setup() and so ep->udc isn't NULL either. Drop the check for _ep being NULL and assign udc earlier to prevent following an uninitialized pointer in the two dev_vdbg()s in lines 878 and 882. This fixes a compiler warning when using clang and CONFIG_USB_GADGET_VERBOSE=y. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202404050227.TTvcCPBu-lkp@intel.com/ Fixes: 6025f20f16c2 ("usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240405055812.694123-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: udc: remove warning when queue disabled ep

2024-03-26T13:58:36Z

It is possible trigger below warning message from mass storage function, WARNING: CPU: 6 PID: 3839 at drivers/usb/gadget/udc/core.c:294 usb_ep_queue+0x7c/0x104 pc : usb_ep_queue+0x7c/0x104 lr : fsg_main_thread+0x494/0x1b3c Root cause is mass storage function try to queue request from main thread, but other thread may already disable ep when function disable. As there is no function failure in the driver, in order to avoid effort to fix warning, change WARN_ON_ONCE() in usb_ep_queue() to pr_debug(). Suggested-by: Alan Stern Cc: stable@vger.kernel.org Signed-off-by: yuan linyu Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20240315020144.2715575-1-yuanlinyu@hihonor.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...

Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-03-13T18:07:37Z

Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...

usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin

2024-03-07T20:59:30Z

Currently the variable irqflags is being set but is not being used, it appears it should be used in the call to net2272_probe_fin rather than IRQF_TRIGGER_LOW being used. Kudos to Uwe Kleine-König for suggesting the fix. Cleans up clang scan build warning: drivers/usb/gadget/udc/net2272.c:2610:15: warning: variable 'irqflags' set but not used [-Wunused-but-set-variable] Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller") Signed-off-by: Colin Ian King Acked-by: Alan Stern Link: https://lore.kernel.org/r/20240307181734.2034407-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic

2024-03-07T20:58:33Z

This commit resolves an issue in the tegra-xudc USB gadget driver that incorrectly fetched USB3 PHY instances. The problem stemmed from the assumption of a one-to-one correspondence between USB2 and USB3 PHY names and their association with physical USB ports in the device tree. Previously, the driver associated USB3 PHY names directly with the USB3 instance number, leading to mismatches when mapping the physical USB ports. For instance, if using USB3-1 PHY, the driver expect the corresponding PHY name as 'usb3-1'. However, the physical USB ports in the device tree were designated as USB2-0 and USB3-0 as we only have one device controller, causing a misalignment. This commit rectifies the issue by adjusting the PHY naming logic. Now, the driver correctly correlates the USB2 and USB3 PHY instances, allowing the USB2-0 and USB3-1 PHYs to form a physical USB port pair while accurately reflecting their configuration in the device tree by naming them USB2-0 and USB3-0, respectively. The change ensures that the PHY and PHY names align appropriately, resolving the mismatch between physical USB ports and their associated names in the device tree. Fixes: b4e19931c98a ("usb: gadget: tegra-xudc: Support multiple device modes") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20240307030328.1487748-3-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman

USB: gadget: pxa27x_udc: Remove unused of_gpio.h

2024-03-07T20:58:30Z

of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240307113936.3642469-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: gadget/snps_udc_plat: Remove unused of_gpio.h

2024-03-07T20:58:27Z

of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240307112509.3627937-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: fsl: Increase size of name buffer for endpoints

2024-03-05T13:31:19Z

This fixes a W=1 warning about sprintf writing up to 16 bytes into a buffer of size 14. There is no practical relevance because there are not more than 32 endpoints. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/6754df25c56aae04f8110594fad2cd2452b1862a.1708709120.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman