kernel/drivers/usb/gadget/legacy, branch linux-6.9.y

usb: gadget: webcam: Make g_webcam loadable again

2023-12-15T17:27:38Z

commit 588b9e85609b ("usb: gadget: uvc: add v4l2 enumeration api calls") has rendered the precomposed (aka legacy) webcam gadget unloadable. uvc_alloc() since then has depended on certain config groups being available in configfs tree related to the UVC function. However, legacy gadgets do not create anything in configfs, so uvc_alloc() must fail with -ENOENT no matter what. This patch mimics the required configfs hierarchy to satisfy the code which inspects formats and frames found in uvcg_streaming_header. This has been tested with guvcview on the host side, using vivid as a source of video stream on the device side and using the userspace program found at https://gitlab.freedesktop.org/camera/uvc-gadget.git. Signed-off-by: Andrzej Pietrasiewicz Fixes: 588b9e85609b ("usb: gadget: uvc: add v4l2 enumeration api calls") Link: https://lore.kernel.org/r/20231215131614.29132-1-andrzej.p@collabora.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-11-04T02:00:42Z

Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...

usb: raw-gadget: report suspend, resume, reset, and disconnect events

2023-10-27T10:58:16Z

Update USB_RAW_IOCTL_EVENT_FETCH to also report suspend, resume, reset, and disconnect events. This allows the code that emulates a USB device via Raw Gadget to handle these events. For example, the device can restart enumeration when it gets reset. Also do not print a WARNING when the event queue overflows. With these new events being queued, the queue might overflow if the device emulation code stops fetching events. Also print debug messages when a non-control event is received. Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/d610b629a5f32fb76c24012180743f7f0f1872c0.1698350424.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: raw-gadget: don't disable device if usb_ep_queue fails

2023-10-27T10:58:16Z

During device operation, the host might decide to reset a device emulated via Raw Gadget. In this case, if the device emulation code has endpoint requests queued, usb_ep_queue will fail with -ESHUTDOWN. Currently, this disables the Raw Gadget device and makes the emulation code unable to proceed. Do not disable the Raw Gadget device if usb_ep_queue fails. Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/3c5df3dddb67623b4aeb11c5546370363e65d8e2.1698350424.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: raw-gadget: properly handle interrupted requests

2023-10-27T10:58:06Z

Currently, if a USB request that was queued by Raw Gadget is interrupted (via a signal), wait_for_completion_interruptible returns -ERESTARTSYS. Raw Gadget then attempts to propagate this value to userspace as a return value from its ioctls. However, when -ERESTARTSYS is returned by a syscall handler, the kernel internally restarts the syscall. This doesn't allow userspace applications to interrupt requests queued by Raw Gadget (which is required when the emulated device is asked to switch altsettings). It also violates the implied interface of Raw Gadget that a single ioctl must only queue a single USB request. Instead, make Raw Gadget do what GadgetFS does: check whether the request was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to userspace. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Cc: stable Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman

legacy: convert to new timestamp accessors

2023-10-18T11:26:17Z

Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton Link: https://lore.kernel.org/r/20231004185347.80880-11-jlayton@kernel.org Signed-off-by: Christian Brauner

usb: gadgetfs: return USB_GADGET_DELAYED_STATUS from setup()

2023-10-02T14:43:05Z

Return USB_GADGET_DELAYED_STATUS from the setup() callback for 0-length transfers as a workaround to stop some UDC drivers (e.g. dwc3) from automatically proceeding with the status stage. This workaround should be removed once all UDC drivers are fixed to always delay the status stage until a response is queued to EP0. Reviewed-by: Alan Stern Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/a8d2b91f9890dc21daa359183e84879ff4525180.1693237258.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: raw-gadget: return USB_GADGET_DELAYED_STATUS from setup()

2023-10-02T14:43:05Z

Return USB_GADGET_DELAYED_STATUS from the setup() callback for 0-length transfers as a workaround to stop some UDC drivers (e.g. dwc3) from automatically proceeding with the status stage. This workaround should be removed once all UDC drivers are fixed to always delay the status stage until a response is queued to EP0. Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/c56077322f0d3fc6d504092a266cb89d75701087.1693237258.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

2023-08-28T16:31:32Z

Pull vfs timestamp updates from Christian Brauner: "This adds VFS support for multi-grain timestamps and converts tmpfs, xfs, ext4, and btrfs to use them. This carries acks from all relevant filesystems. The VFS always uses coarse-grained timestamps when updating the ctime and mtime after a change. This has the benefit of allowing filesystems to optimize away a lot of metadata updates, down to around 1 per jiffy, even when a file is under heavy writes. Unfortunately, this has always been an issue when we're exporting via NFSv3, which relies on timestamps to validate caches. A lot of changes can happen in a jiffy, so timestamps aren't sufficient to help the client decide to invalidate the cache. Even with NFSv4, a lot of exported filesystems don't properly support a change attribute and are subject to the same problems with timestamp granularity. Other applications have similar issues with timestamps (e.g., backup applications). If we were to always use fine-grained timestamps, that would improve the situation, but that becomes rather expensive, as the underlying filesystem would have to log a lot more metadata updates. This introduces fine-grained timestamps that are used when they are actively queried. This uses the 31st bit of the ctime tv_nsec field to indicate that something has queried the inode for the mtime or ctime. When this flag is set, on the next mtime or ctime update, the kernel will fetch a fine-grained timestamp instead of the usual coarse-grained one. As POSIX generally mandates that when the mtime changes, the ctime must also change the kernel always stores normalized ctime values, so only the first 30 bits of the tv_nsec field are ever used. Filesytems can opt into this behavior by setting the FS_MGTIME flag in the fstype. Filesystems that don't set this flag will continue to use coarse-grained timestamps. Various preparatory changes, fixes and cleanups are included: - Fixup all relevant places where POSIX requires updating ctime together with mtime. This is a wide-range of places and all maintainers provided necessary Acks. - Add new accessors for inode->i_ctime directly and change all callers to rely on them. Plain accesses to inode->i_ctime are now gone and it is accordingly rename to inode->__i_ctime and commented as requiring accessors. - Extend generic_fillattr() to pass in a request mask mirroring in a sense the statx() uapi. This allows callers to pass in a request mask to only get a subset of attributes filled in. - Rework timestamp updates so it's possible to drop the @now parameter the update_time() inode operation and associated helpers. - Add inode_update_timestamps() and convert all filesystems to it removing a bunch of open-coding" * tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits) btrfs: convert to multigrain timestamps ext4: switch to multigrain timestamps xfs: switch to multigrain timestamps tmpfs: add support for multigrain timestamps fs: add infrastructure for multigrain timestamps fs: drop the timespec64 argument from update_time xfs: have xfs_vn_update_time gets its own timestamp fat: make fat_update_time get its own timestamp fat: remove i_version handling from fat_update_time ubifs: have ubifs_update_time use inode_update_timestamps btrfs: have it use inode_update_timestamps fs: drop the timespec64 arg from generic_update_time fs: pass the request_mask to generic_fillattr fs: remove silly warning from current_time gfs2: fix timestamp handling on quota inodes fs: rename i_ctime field to __i_ctime selinux: convert to ctime accessor functions security: convert to ctime accessor functions apparmor: convert to ctime accessor functions sunrpc: convert to ctime accessor functions ...

USB: gadget: Fix the memory leak in raw_gadget driver

2023-07-25T15:43:23Z

Currently, increasing raw_dev->count happens before invoke the raw_queue_event(), if the raw_queue_event() return error, invoke raw_release() will not trigger the dev_free() to be called. [ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event [ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12 [ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12 [ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy [ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16 BUG: memory leak [] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [] kmalloc include/linux/slab.h:582 [inline] [] kzalloc include/linux/slab.h:703 [inline] [] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline] [] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385 [] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165 [] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [] kmalloc include/linux/slab.h:582 [inline] [] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460 [] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250 [] vfs_ioctl fs/ioctl.c:51 [inline] [] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [] kmalloc include/linux/slab.h:582 [inline] [] kzalloc include/linux/slab.h:703 [inline] [] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665 [] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196 [] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292 This commit therefore invoke kref_get() under the condition that raw_queue_event() return success. Reported-by: syzbot+feb045d335c1fdde5bf7@syzkaller.appspotmail.com Cc: stable Closes: https://syzkaller.appspot.com/bug?extid=feb045d335c1fdde5bf7 Signed-off-by: Zqiang Reviewed-by: Andrey Konovalov Tested-by: Andrey Konovalov Link: https://lore.kernel.org/r/20230714074011.20989-1-qiang.zhang1211@gmail.com Signed-off-by: Greg Kroah-Hartman