kernel/drivers/usb/gadget/function, branch linux-4.16.y

usb: gadget: function: printer: avoid wrong list handling in printer_write()

2018-06-16T07:43:43Z

commit 4a014a7339f441b0851ce012f469c0fadac61c81 upstream. When printer_write() calls usb_ep_queue(), a udc driver (e.g. renesas_usbhs driver) may call usb_gadget_giveback_request() in the udc .queue ops immediately. Then, printer_write() calls list_add(&req->list, &dev->tx_reqs_active) wrongly. After that, if we do unbind the printer driver, WARN_ON() happens in printer_func_unbind() because the list entry is not removed. So, this patch moves list_add(&req->list, &dev->tx_reqs_active) calling before usb_ep_queue(). Signed-off-by: Yoshihiro Shimoda Acked-by: Felipe Balbi Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: gadget: ffs: Execute copy_to_user() with USER_DS set

2018-05-25T14:46:09Z

[ Upstream commit 4058ebf33cb0be88ca516f968eda24ab7b6b93e4 ] When using a AIO read() operation on the function FS gadget driver a URB is submitted asynchronously and on URB completion the received data is copied to the userspace buffer associated with the read operation. This is done from a kernel worker thread invoking copy_to_user() (through copy_to_iter()). And while the user space process memory is made available to the kernel thread using use_mm(), some architecture require in addition to this that the operation runs with USER_DS set. Otherwise the userspace memory access will fail. For example on ARM64 with Privileged Access Never (PAN) and User Access Override (UAO) enabled the following crash occurs. Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP Modules linked in: CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) Workqueue: events ffs_user_copy_worker task: ffffffc87afc8080 task.stack: ffffffc87a00c000 PC is at __arch_copy_to_user+0x190/0x220 LR is at copy_to_iter+0x78/0x3c8 [...] [] __arch_copy_to_user+0x190/0x220 [] ffs_user_copy_worker+0x70/0x130 [] process_one_work+0x1dc/0x460 [] worker_thread+0x50/0x4b0 [] kthread+0xd8/0xf0 [] ret_from_fork+0x10/0x50 Address this by placing a set_fs(USER_DS) before of the copy operation and revert it again once the copy operation has finished. This patch is analogous to commit d7ffde35e31a ("vhost: use USER_DS in vhost_worker thread") which addresses the same underlying issue. Signed-off-by: Lars-Peter Clausen Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS

2018-05-25T14:46:09Z

[ Upstream commit 946ef68ad4e45aa048a5fb41ce8823ed29da866a ] Some UDC drivers (like the DWC3) expect that the response to a setup() request is queued from within the setup function itself so that it is available as soon as setup() has completed. Upon receiving a setup request the function fs driver creates an event that is made available to userspace. And only once userspace has acknowledged that event the response to the setup request is queued. So it violates the requirement of those UDC drivers and random failures can be observed. This is basically a race condition and if userspace is able to read the event and queue the response fast enough all is good. But if it is not, for example because other processes are currently scheduled to run, the USB host that sent the setup request will observe an error. To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS return code. If a setup() callback returns this value the UDC driver is aware that response is not yet available and can uses the appropriate methods to handle this case. Since in the case of function fs the response will never be available when the setup() function returns make sure that this status code is used. This fixed random occasional failures that were previously observed on a DWC3 based system under high system load. Signed-off-by: Lars-Peter Clausen Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

USB: gadget: f_midi: fixing a possible double-free in f_midi

2018-04-24T07:42:52Z

commit 7fafcfdf6377b18b2a726ea554d6e593ba44349f upstream. It looks like there is a possibility of a double-free vulnerability on an error path of the f_midi_set_alt function in the f_midi driver. If the path is feasible then free_ep_req gets called twice: req->complete = f_midi_complete; err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC); => ... usb_gadget_giveback_request => f_midi_complete (CALLBACK) (inside f_midi_complete, for various cases of status) free_ep_req(ep, req); // first kfree if (err) { ERROR(midi, "%s: couldn't enqueue request: %d\n", midi->out_ep->name, err); free_ep_req(midi->out_ep, req); // second kfree return err; } The double-free possibility was introduced with commit ad0d1a058eac ("usb: gadget: f_midi: fix leak on failed to enqueue out requests"). Found by MOXCAFE tool. Signed-off-by: Tuba Yavuz Fixes: ad0d1a058eac ("usb: gadget: f_midi: fix leak on failed to enqueue out requests") Acked-by: Felipe Balbi Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()

2018-03-05T08:42:53Z

When I debug a kernel crash issue in funcitonfs, found ffs_data.ref overflowed, While functionfs is unmounting, ffs_data is put twice. Commit 43938613c6fd ("drivers, usb: convert ffs_data.ref from atomic_t to refcount_t") can avoid refcount overflow, but that is risk some situations. So no need put ffs data in ffs_fs_kill_sb, already put in ffs_data_closed. The issue can be reproduced in Mediatek mt6763 SoC, ffs for ADB device. KASAN enabled configuration reports use-after-free errro. BUG: KASAN: use-after-free in refcount_dec_and_test+0x14/0xe0 at addr ffffffc0579386a0 Read of size 4 by task umount/4650 ==================================================== BUG kmalloc-512 (Tainted: P W O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in ffs_fs_mount+0x194/0x844 age=22856 cpu=2 pid=566 alloc_debug_processing+0x1ac/0x1e8 ___slab_alloc.constprop.63+0x640/0x648 __slab_alloc.isra.57.constprop.62+0x24/0x34 kmem_cache_alloc_trace+0x1a8/0x2bc ffs_fs_mount+0x194/0x844 mount_fs+0x6c/0x1d0 vfs_kern_mount+0x50/0x1b4 do_mount+0x258/0x1034 INFO: Freed in ffs_data_put+0x25c/0x320 age=0 cpu=3 pid=4650 free_debug_processing+0x22c/0x434 __slab_free+0x2d8/0x3a0 kfree+0x254/0x264 ffs_data_put+0x25c/0x320 ffs_data_closed+0x124/0x15c ffs_fs_kill_sb+0xb8/0x110 deactivate_locked_super+0x6c/0x98 deactivate_super+0xb0/0xbc INFO: Object 0xffffffc057938600 @offset=1536 fp=0x (null) ...... Call trace: [] dump_backtrace+0x0/0x250 [] show_stack+0x14/0x1c [] dump_stack+0xa0/0xc8 [] print_trailer+0x158/0x260 [] object_err+0x3c/0x40 [] kasan_report_error+0x2a8/0x754 [] kasan_report+0x5c/0x60 [] __asan_load4+0x70/0x88 [] refcount_dec_and_test+0x14/0xe0 [] ffs_data_put+0x80/0x320 [] ffs_fs_kill_sb+0xc8/0x110 [] deactivate_locked_super+0x6c/0x98 [] deactivate_super+0xb0/0xbc [] cleanup_mnt+0x64/0xec [] __cleanup_mnt+0x10/0x18 [] task_work_run+0xcc/0x124 [] do_notify_resume+0x60/0x70 [] work_pending+0x10/0x14 Cc: stable@vger.kernel.org Signed-off-by: Xinyong Signed-off-by: Felipe Balbi

usb: gadget: f_fs: Use config_ep_by_speed()

2018-02-12T08:52:54Z

In commit 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along") there is a pointer arithmetic bug where the comp_desc is obtained as follows: comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + USB_DT_ENDPOINT_SIZE); Since ds is a pointer to usb_endpoint_descriptor, adding 7 to it ends up going out of bounds (7 * sizeof(struct usb_endpoint_descriptor), which is actually 7*9 bytes) past the SS descriptor. As a result the maxburst value will be read incorrectly, and the UDC driver will also get a garbage comp_desc (assuming it uses it). Since Felipe wrote, "Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though", let's finally do it. This allows the other usb_ep fields to be properly populated, such as maxpacket and mult. It also eliminates the awkward speed-based descriptor lookup since config_ep_by_speed() does that already using the ones found in struct usb_function. Fixes: 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along") Cc: stable@vger.kernel.org Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi

usb: gadget: f_fs: Process all descriptors during bind

2018-02-12T08:52:37Z

During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by: Mayank Rana Signed-off-by: Mayank Rana Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi

usb: gadget: f_uac2: fix bFirstInterface in composite gadget

2018-02-12T08:48:59Z

If there are multiple functions associated with a configuration, then the UAC2 interfaces may not start at zero. Set the correct first interface number in the association descriptor so that the audio interfaces are enumerated correctly in this case. Reviewed-by: Krzysztof Opasiak Signed-off-by: John Keeping Signed-off-by: Felipe Balbi

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-02-01T17:40:49Z

Pull USB/PHY updates from Greg KH: "Here is the big USB and PHY driver update for 4.16-rc1. Along with the normally expected XHCI, MUSB, and Gadget driver patches, there are some PHY driver fixes, license cleanups, sysfs attribute cleanups, usbip changes, and a raft of other smaller fixes and additions. Full details are in the shortlog. All of these have been in the linux-next tree for a long time with no reported issues" * tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (137 commits) USB: serial: pl2303: new device id for Chilitag USB: misc: fix up some remaining DEVICE_ATTR() usages USB: musb: fix up one odd DEVICE_ATTR() usage USB: atm: fix up some remaining DEVICE_ATTR() usage USB: move many drivers to use DEVICE_ATTR_WO USB: move many drivers to use DEVICE_ATTR_RO USB: move many drivers to use DEVICE_ATTR_RW USB: misc: chaoskey: Use true and false for boolean values USB: storage: remove old wording about how to submit a change USB: storage: remove invalid URL from drivers usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found usbip: list: don't list devices attached to vhci_hcd usbip: prevent bind loops on devices attached to vhci_hcd USB: serial: remove redundant initializations of 'mos_parport' usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc() usb: gadget: compress return logic into one line usbip: vhci_hcd: update 'status' file header and format USB: serial: simple: add Motorola Tetra driver CDC-ACM: apply quirk for card reader usb: option: Add support for FS040U modem ...