kernel/drivers/usb/dwc3/dwc3-qcom.c, branch linux-6.9.y

usb: dwc3: qcom: Remove ACPI support from glue driver

2024-03-05T13:06:14Z

Minimal ACPI support was added to the Qualcomm DWC3 glue driver in order to enable USB on SDM850 and SC8180X compute platforms. The support is still functional, but unnoticed regressions in other drivers indicates that no one actually booting any of platforms dependent on this implementation. The functionality provides is the bare minimum and is not expected to aid in the effort of bringing full ACPI support to the driver in the future. Remove the ACPI code from the Qualcomm DWC3 glue driver to aid in the implementation of improvements that are actually used like multiport and flattening device tree. Commit message by Bjorn Andersson. Signed-off-by: Krishna Kurapati Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20240305093216.3814787-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irq

2024-01-04T15:04:50Z

For wakeup to work, driver needs to enable interrupts that depict what is happening on the DP/DM lines. On QUSB targets, this is identified by qusb2_phy whereas on SoCs using Femto PHY, separate {dp,dm}_hs_phy_irq's are used instead. The implementation incorrectly names qusb2_phy interrupts as "hs_phy_irq". Clean this up so that driver would be using only qusb2/(dp & dm) for wakeup purposes. For devices running older kernels, this won't break any functionality because the interrupt configurations in QUSB2 PHY based SoCs is done by configuring QUSB2PHY_INTR_CTRL register in PHY address space and it was never armed properly right from the start. Signed-off-by: Krishna Kurapati Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20231227091951.685-3-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix ACPI platform device leak

2023-11-22T12:14:36Z

Make sure to free the "urs" platform device, which is created for some ACPI platforms, on probe errors and on driver unbind. Compile-tested only. Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot") Cc: Shawn Guo Signed-off-by: Johan Hovold Acked-by: Andrew Halaney Acked-by: Shawn Guo Link: https://lore.kernel.org/r/20231117173650.21161-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix software node leak on probe errors

2023-11-22T12:14:35Z

Make sure to remove the software node also on (ACPI) probe errors to avoid leaking the underlying resources. Note that the software node is only used for ACPI probe so the driver unbind tear down is updated to match probe. Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node") Cc: stable@vger.kernel.org # 5.12 Cc: Heikki Krogerus Signed-off-by: Johan Hovold Acked-by: Heikki Krogerus Acked-by: Andrew Halaney Link: https://lore.kernel.org/r/20231117173650.21161-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix resource leaks on probe deferral

2023-11-22T12:14:35Z

The driver needs to deregister and free the newly allocated dwc3 core platform device on ACPI probe errors (e.g. probe deferral) and on driver unbind but instead it leaked those resources while erroneously dropping a reference to the parent platform device which is still in use. For OF probing the driver takes a reference to the dwc3 core platform device which has also always been leaked. Fix the broken ACPI tear down and make sure to drop the dwc3 core reference for both OF and ACPI. Fixes: 8fd95da2cfb5 ("usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()") Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI") Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Cc: Christophe JAILLET Cc: Lee Jones Signed-off-by: Johan Hovold Acked-by: Andrew Halaney Link: https://lore.kernel.org/r/20231117173650.21161-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: simplify wakeup interrupt setup

2023-11-22T12:14:25Z

Use the IRQF_NO_AUTOEN irq flag when requesting the wakeup interrupts instead of setting it separately. No functional change intended. Signed-off-by: Johan Hovold Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20231120161607.7405-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix wakeup after probe deferral

2023-11-22T12:14:25Z

The Qualcomm glue driver is overriding the interrupt trigger types defined by firmware when requesting the wakeup interrupts during probe. This can lead to a failure to map the DP/DM wakeup interrupts after a probe deferral as the firmware defined trigger types do not match the type used for the initial mapping: irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000! irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000! Fix this by not overriding the firmware provided trigger types when requesting the wakeup interrupts. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Johan Hovold Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-07-03T20:23:10Z

Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1. Included in here are: - Lots of USB4/Thunderbolt additions and updates for new hardware types and fixes as people are starting to get access to the hardware in the wild - new gadget controller driver, cdns2, added - new typec drivers added - xhci driver updates - typec driver updates - usbip driver fixes - usb-serial driver updates and fixes - lots of smaller USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC usb: host: xhci: Do not re-initialize the XHCI HC if being removed usb: typec: nb7vpq904m: fix CONFIG_DRM dependency usbip: usbip_host: Replace strlcpy with strscpy usb: dwc3: gadget: Propagate core init errors to UDC during pullup USB: serial: option: add LARA-R6 01B PIDs usb: ulpi: Make container_of() no-op in to_ulpi_dev() usb: gadget: legacy: fix error return code in gfs_bind usb: typec: fsa4480: add support for Audio Accessory Mode usb: typec: fsa4480: rework mux & switch setup to handle more states usb: typec: ucsi: call typec_set_mode on non-altmode partner change USB: gadget: f_hid: make hidg_class a static const structure USB: gadget: f_printer: make usb_gadget_class a static const structure USB: mon: make mon_bin_class a static const structure USB: gadget: udc: core: make udc_class a static const structure USB: roles: make role_class a static const structure dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt dt-bindings: usb: Add StarFive JH7110 USB controller dt-bindings: usb: dwc3: Add IPQ9574 compatible usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup" ...

usb: dwc3: qcom: use dev_err_probe() where appropriate

2023-06-13T09:57:01Z

Update to using dev_err_probe() throughout to reduce spam and log useful information in devices_deferred. Signed-off-by: Andrew Halaney Message-ID: <20230605193625.63187-1-ahalaney@redhat.com> Signed-off-by: Greg Kroah-Hartman

usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()

2023-06-13T09:56:34Z

If dwc3_qcom_create_urs_usb_platdev() fails, some resources still need to be released, as already done in the other error handling path of the probe. Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot") Signed-off-by: Christophe JAILLET Reviewed-by: Andrew Halaney Message-ID: Signed-off-by: Greg Kroah-Hartman