kernel/drivers/usb/dwc2, branch linux-5.1.y

usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()

2019-07-14T06:09:49Z

commit dfc4fdebc5d62ac4e2fe5428e59b273675515fb2 upstream. Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences. This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14. Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout. Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver. Cc: linux-stable # 4.19+ Acked-by: Minas Harutyunyan Signed-off-by: Martin Blumenstingl Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: dwc2: fix zlp handling

2019-07-10T07:52:24Z

[ Upstream commit 066cfd0770aba8a9ac79b59d99530653885d919d ] The patch 10209abe87f5ebfd482a00323f5236d6094d0865 usb: dwc2: gadget: Add scatter-gather mode avoided a NULL pointer dereference (hs_ep->req == NULL) by calling dwc2_gadget_fill_nonisoc_xfer_dma_one() directly instead of through the dwc2_gadget_config_nonisoc_xfer_ddma() wrapper, which unconditionally dereferenced the said pointer. However, this was based on an incorrect assumption that in the context of dwc2_hsotg_program_zlp() the pointer is always NULL, which is not the case. The result were SB CV MSC tests failing starting from Test Case 6. Instead, this patch reverts to calling the wrapper and adds a check for the pointer being NULL inside the wrapper. Fixes: 10209abe87f5 (usb: dwc2: gadget: Add scatter-gather mode) Acked-by: Minas Harutyunyan Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)

2019-06-19T06:00:13Z

commit babd183915e91a64e976b9e8ab682bb56624df76 upstream. In commit abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size") the API to usb_endpoint_maxp() changed. It used to just return wMaxPacketSize but after that commit it returned wMaxPacketSize with the high bits (the multiplier) masked off. If you wanted to get the multiplier it was now up to your code to call the new usb_endpoint_maxp_mult() which was introduced in commit 541b6fe63023 ("usb: add helper to extract bits 12:11 of wMaxPacketSize"). Prior to the API change most host drivers were updated, but no update was made to dwc2. Presumably it was assumed that dwc2 was too simplistic to use the multiplier and thus just didn't support a certain class of USB devices. However, it turns out that dwc2 did use the multiplier and many devices using it were working quite nicely. That means that many USB devices have been broken since the API change. One such device is a Logitech HD Pro Webcam C920. Specifically, though dwc2 didn't directly call usb_endpoint_maxp(), it did call usb_maxpacket() which in turn called usb_endpoint_maxp(). Let's update dwc2 to work properly with the new API. Fixes: abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan Reviewed-by: Matthias Kaehlcke Signed-off-by: Douglas Anderson Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Fix DMA cache alignment issues

2019-06-19T06:00:12Z

commit 4a4863bf2e7932e584a3a462d3c6daf891142ddc upstream. Insert a padding between data and the stored_xfer_buffer pointer to ensure they are not on the same cache line. Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS) Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") Fixes: 56406e017a88 ("usb: dwc2: Fix DMA alignment to start at allocated boundary") Cc: Tested-by: Douglas Anderson Reviewed-by: Douglas Anderson Acked-by: Minas Harutyunyan Signed-off-by: Martin Schiller Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: Increase descriptors count for ISOC's

2019-05-31T13:43:16Z

[ Upstream commit 54f37f56631747075f1f9a2f0edf6ba405e3e66c ] Some function drivers queueing more than 128 ISOC requests at a time. To avoid "descriptor chain full" cases, increasing descriptors count from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's only. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc2: use struct_size() in kzalloc()

2019-02-19T13:41:38Z

One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-02-15T08:08:57Z

Felipe writes: USB: changes for v5.1 merge window Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few changes which improve request cancellation and some improvements to how we print to the trace buffer. Renesas_usb3 got support for r8a774c0 device. Dwc2 got scatter-gather support. Apart from these, the usual set of minor fixes and all sorts of small details. * tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (40 commits) usb: phy: twl6030-usb: fix possible use-after-free on remove usb: misc: usbtest: add super-speed isoc support usb: dwc3: Reset num_trbs after skipping usb: dwc3: gadget: don't enable interrupt when disabling endpoint fotg210-udc: pass struct device to DMA API functions fotg210-udc: remove a bogus dma_sync_single_for_device call usb: gadget: Change Andrzej Pietrasiewicz's e-mail address usb: f_fs: Avoid crash due to out-of-scope stack ptr access usb: dwc3: haps: Workaround matching VID PID usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss() usb: gadget: function: sync f_uac1 ac header baInterfaceNr usb: dwc2: gadget: Add scatter-gather mode usb: gadget: fix various indentation issues usb: dwc2: Fix EP TxFIFO number setting udc: net2280: Fix net2280_disable USB: gadget: Improve kerneldoc for usb_ep_dequeue() usb: dwc3: debug: purge usage of strcat usb: dwc3: trace: pass trace buffer size to decoding functions usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING ...

usb: dwc2: gadget: Add scatter-gather mode

2019-02-07T11:14:51Z

This patch adds support for transferring requests, which are non-contiguous in physical memory, i.e. the data buffer is described by a scatter-list. This allows transferring large requests without relying on error-prone contiguous buffer allocations. This way of allocating requests is already implemented in functionfs and TCM USB functions and automatically used if UDC driver advertises scatter-gather suppport. Signed-off-by: Andrzej Pietrasiewicz [mszyprow: fixed null pointer issue, rewrote commit message] Signed-off-by: Marek Szyprowski Signed-off-by: Felipe Balbi

usb: dwc2: Fix EP TxFIFO number setting

2019-02-07T11:14:51Z

In case when some EP IN is frequently reused, i.e. enabled/disabled by function driver. It is required to clear TxFIFO number field in DIEPCTL register before setting new number. Otherwise there is probability to have same TxFIFO number for different EP's because of OR operator. Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi

Merge 5.0-rc4 into usb-next

2019-01-28T07:44:58Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman