kernel/drivers/usb/dwc2/hcd_intr.c, branch linux-6.9.y

USB: dwc2: write HCINT with INTMASK applied

2023-11-21T14:30:27Z

dwc2_hc_n_intr() writes back INTMASK as read but evaluates it with intmask applied. In stress testing this causes spurious interrupts like this: [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length Applying INTMASK prevents this. The issue exists in all versions of the driver. Signed-off-by: Oliver Neukum Tested-by: Ivan Ivanov Tested-by: Andrea della Porta Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: dwc2: hande irq on dead controller correctly

2023-08-22T12:46:30Z

If the controller is dead, the honest answer to the question whether it has caused an irq is: unknown As the purpose of the irq return is to trigger switching off an IRQ, the correct response if you cannot determine if your device has caused the interrupt is IRQ_HANDLED Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20230822112455.18957-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Remove redundant license text

2022-09-22T13:52:29Z

SPDX-License-Identifier have been added in commit 5fd54ace4721 ("USB: add SPDX identifiers to all remaining files in drivers/usb/") There is no point in keeping the now redundant license text. Remove it. Acked-by: Minas Harutyunyan Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Make "trimming xfer length" a debug message

2021-01-26T17:42:15Z

With some USB network adapters, such as DM96xx, the following message is seen for each maximum size receive packet. dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length This happens because the packet size requested by the driver is 1522 bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to receive 24*64 = 1536 bytes, and the chip does indeed send more than 1522 bytes of data. Since the event does not indicate an error condition, the message is just noise. Demote it to debug level. Fixes: 7359d482eb4d3 ("staging: HCD files for the DWC2 driver") Tested-by: Nicolas Saenz Julienne Reviewed-by: Douglas Anderson Signed-off-by: Guenter Roeck Signed-off-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman

usb: dwc2: Abort transaction after errors with unknown reason

2021-01-26T17:42:15Z

In some situations, the following error messages are reported. dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021 This is sometimes followed by: dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length and then: WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913 dwc2_assign_and_init_hc+0x98c/0x990 The warning suggests that an odd buffer address is to be used for DMA. After an error is observed, the receive buffer may be full (urb->actual_length >= urb->length). However, the urb is still left in the queue unless three errors were observed in a row. When it is queued again, the dwc2 hcd code translates this into a 1-block transfer. If urb->actual_length (ie the total expected receive length) is not DMA-aligned, the buffer pointer programmed into the chip will be unaligned. This results in the observed warning. To solve the problem, abort input transactions after an error with unknown cause if the entire packet was already received. This may be a bit drastic, but we don't really know why the transfer was aborted even though the entire packet was received. Aborting the transfer in this situation is less risky than accepting a potentially corrupted packet. With this patch in place, the 'ChHltd set' and 'trimming xfer length' messages are still observed, but there are no more transfer attempts with odd buffer addresses. Fixes: 151d0cbdbe860 ("usb: dwc2: make the scheduler handle excessive NAKs better") Cc: Boris ARZUR Cc: Douglas Anderson Tested-by: Nicolas Saenz Julienne Reviewed-by: Douglas Anderson Signed-off-by: Guenter Roeck Signed-off-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman

usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)

2019-06-06T10:51:41Z

In commit abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size") the API to usb_endpoint_maxp() changed. It used to just return wMaxPacketSize but after that commit it returned wMaxPacketSize with the high bits (the multiplier) masked off. If you wanted to get the multiplier it was now up to your code to call the new usb_endpoint_maxp_mult() which was introduced in commit 541b6fe63023 ("usb: add helper to extract bits 12:11 of wMaxPacketSize"). Prior to the API change most host drivers were updated, but no update was made to dwc2. Presumably it was assumed that dwc2 was too simplistic to use the multiplier and thus just didn't support a certain class of USB devices. However, it turns out that dwc2 did use the multiplier and many devices using it were working quite nicely. That means that many USB devices have been broken since the API change. One such device is a Logitech HD Pro Webcam C920. Specifically, though dwc2 didn't directly call usb_endpoint_maxp(), it did call usb_maxpacket() which in turn called usb_endpoint_maxp(). Let's update dwc2 to work properly with the new API. Fixes: abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan Reviewed-by: Matthias Kaehlcke Signed-off-by: Douglas Anderson Signed-off-by: Felipe Balbi

Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2018-07-30T08:21:14Z

Felipe writes: usb: changes for v4.19 Not a big pull request with only 37 non-merge commits, most of which are touching dwc2 (74% of the changes). The most important changes are dwc2's support for uframe scheduling and its endian-agnostic readl/writel wrappers. From dwc3 side we have a special new glue layer for Synopsys HAPS which will help Synopsys running FPGA validation using our upstream driver. We also have the beginnings of dual-role support for Intel Merrifield platform. Apart from these, just a series of non-critical changes.

usb: dwc2: Modify dwc2_readl/writel functions prototype

2018-07-30T07:39:16Z

Added hsotg argument to dwc2_readl/writel function prototype, and also instead of address pass offset of register. hsotg will contain flag field for endianness. Also customized dwc2_set_bit and dwc2_clear_bit function for dwc2_readl/writel functions. Signed-off-by: Gevorg Sahakyan Signed-off-by: Felipe Balbi

usb: dwc2: host: do not delay retries for CONTROL IN transfers

2018-07-17T07:12:51Z

When handling split transactions we will try to delay retry after getting a NAK from the device. This works well for BULK transfers that can be polled for essentially forever. Unfortunately, on slower systems at boot time, when the kernel is busy enumerating all the devices (USB or not), we issue a bunch of control requests (reading device descriptors, etc). If we get a NAK for the IN part of the control request and delay retry for too long (because the system is busy), we may confuse the device when we finally get to reissue SSPLIT/CSPLIT IN and the device will respond with STALL. As a result we end up with failure to get device descriptor and will fail to enumerate the device: [ 3.428801] usb 2-1.2.1: new full-speed USB device number 9 using dwc2 [ 3.508576] usb 2-1.2.1: device descriptor read/8, error -32 [ 3.699150] usb 2-1.2.1: device descriptor read/8, error -32 [ 3.891653] usb 2-1.2.1: new full-speed USB device number 10 using dwc2 [ 3.968859] usb 2-1.2.1: device descriptor read/8, error -32 ... Let's not delay retries of split CONTROL IN transfers, as this allows us to reliably enumerate devices at boot time. Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away") Reviewed-by: Douglas Anderson Signed-off-by: Dmitry Torokhov Signed-off-by: Felipe Balbi

usb: dwc2: fix isoc split in transfer with no data

2018-06-19T09:48:13Z

If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Tested-by: Gevorg Sahakyan Tested-by: Heiko Stuebner Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu Signed-off-by: Felipe Balbi