kernel/drivers/usb/dwc2/gadget.c, branch linux-6.9.y

usb: dwc2: gadget: LPM flow fix

2024-03-26T13:56:28Z

Added functionality to exit from L1 state by device initiation using remote wakeup signaling, in case when function driver queuing request while core in L1 state. Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state") Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: Fix exiting from clock gating

2024-03-26T13:56:25Z

Added exiting from the clock gating mode on USB Reset Detect interrupt if core in the clock gating mode. Added new condition to check core in clock gating mode or no. Fixes: 9b4965d77e11 ("usb: dwc2: Add exit clock gating from session request interrupt") Fixes: 5d240efddc7f ("usb: dwc2: Add exit clock gating from wakeup interrupt") Fixes: 16c729f90bdf ("usb: dwc2: Allow exit clock gating in urb enqueue") Fixes: 401411bbc4e6 ("usb: dwc2: Add exit clock gating before removing driver") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/cbcc2ccd37e89e339130797ed68ae4597db773ac.1708938774.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: Explicitly include correct DT includes

2023-07-25T16:20:02Z

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: dwc2: fix a race, don't power off/on phy for dual-role mode

2023-03-23T18:13:16Z

When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe successively basically calls: - dwc2_gadget_init() - dwc2_hcd_init() - dwc2_lowlevel_hw_disable() since recent change [1] - usb_add_gadget_udc() The PHYs (and so the clocks it may provide) shouldn't be disabled for all SoCs, in OTG mode, as the HCD part has been initialized. On STM32 this creates some weird race condition upon boot, when: - initially attached as a device, to a HOST - and there is a gadget script invoked to setup the device part. Below issue becomes systematic, as long as the gadget script isn't started by userland: the hardware PHYs (and so the clocks provided by the PHYs) remains disabled. It ends up in having an endless interrupt storm, before the watchdog resets the platform. [ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM [ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller [ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2 [ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000 [ 17.032170] hub 2-0:1.0: USB hub found [ 17.042299] hub 2-0:1.0: 1 port detected [ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode ... The host part is also not functional, until the gadget part is configured. The HW may only be disabled for peripheral mode (original init), e.g. dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes. But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part is able to run, while the gadget part isn't necessarily configured. I don't fully get the of purpose the original change, that claims disabling the hardware is missing. It creates conditions on SOCs using the PHY initialization to be completely non working in OTG mode. Original change [1] should be reworked to be platform specific. [1] https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode") Cc: stable Signed-off-by: Fabrice Gasnier Reviewed-by: Quentin Schulz Tested-by: Quentin Schulz Link: https://lore.kernel.org/r/20230315144433.3095859-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: power on/off phy for peripheral mode in dual-role mode

2022-12-08T15:50:56Z

The PHY power is handled for peripheral mode but only when the device is forced into this peripheral mode. It is missing when the device is operating in peripheral mode when dual-role mode is enabled, so let's update the condition to match this scenario. Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switch

2022-06-24T11:37:27Z

When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is cleared, whatever the vbus valid signal state is. The pull-up should not be set when vbus isn't present (this is determined by the drd controller). This patch ensures that B-Session (so Peripheral role + vbus valid signal) is valid before clearing the DCTL_SFTDISCON bit when role switch is used. Keep original behavior when usb-role-switch isn't used. Acked-by: Minas Harutyunyan Signed-off-by: Amelie Delaunay Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: don't reset gadget's driver->bus

2022-05-05T19:52:16Z

UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference: dwc2 12480000.hsotg: bound driver g_ether 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: ... CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at module_add_driver+0x44/0xe8 LR is at sysfs_do_create_link_sd+0x84/0xe0 ... Process modprobe (pid: 620, stack limit = 0x(ptrval)) ... module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54 Exception stack(0xf1771fa8 to 0xf1771ff0) ... dwc2 12480000.hsotg: new device is high-speed ---[ end trace 0000000000000000 ]--- Fix this by removing driver->bus entry reset. Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

2022-01-26T12:49:35Z

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following logs before returning -EINVAL: dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0 dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0 To avoid these two logs while suspending, start disabling the endpoint from the index 1, as done in dwc2_hsotg_udc_stop: /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } Acked-by: Minas Harutyunyan Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman

usb: dwc2: gadget: initialize max_speed from params

2022-01-06T14:28:12Z

DWC2 may be paired with a full-speed PHY which is not capable of high-speed operation. Report this correctly to the gadget core by setting max_speed from the core parameters. Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") this didn't cause the hardware to be configured incorrectly, although the speed may have been reported incorrectly. But after that commit params.speed is updated based on a value passed in by the gadget core which may set it to a faster speed than is supported by the hardware. Initialising the max_speed parameter ensures the speed passed to dwc2_gadget_set_speed() will be one supported by the hardware. Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") Acked-by: Minas Harutyunyan Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20220106115731.1473909-1-john@metanate.com Signed-off-by: Greg Kroah-Hartman

Merge 5.16-rc3 into usb-next

2021-11-29T07:04:46Z

We need the USB driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman