kernel/drivers/usb/core, branch linux-6.9.y

USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor

2024-07-18T11:22:46Z

commit a368ecde8a5055b627749b09c6218ef793043e47 upstream. Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+8693a0bb9c10b554272a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/0000000000003d868e061bc0f554@google.com/ Fixes: 0a8fd1346254 ("USB: fix problems with duplicate endpoint addresses") CC: Oliver Neukum CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/205a5edc-7fef-4159-b64a-80374b6b101a@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: core: add missing of_node_put() in usb_of_has_devices_or_graph

2024-07-18T11:22:46Z

commit c7a5403ea04320e08f2595baa940541a59a3856e upstream. The for_each_child_of_node() macro requires an explicit call to of_node_put() on early exits to decrement the child refcount and avoid a memory leak. The child node is not required outsie the loop, and the resource must be released before the function returns. Add the missing of_node_put(). Cc: stable@vger.kernel.org Fixes: 82e82130a78b ("usb: core: Set connect_type of ports based on DT node") Signed-off-by: Javier Carrasco Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20240624-usb_core_of_memleak-v1-1-af6821c1a584@gmail.com Signed-off-by: Greg Kroah-Hartman

USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k

2024-07-18T11:22:46Z

commit 3859e85de30815a20bce7db712ce3d94d40a682d upstream. START BP-850K is a dot matrix printer that crashes when it receives a Set-Interface request and needs USB_QUIRK_NO_SET_INTF to work properly. Cc: stable Signed-off-by: jinxiaobo Signed-off-by: WangYuli Link: https://lore.kernel.org/r/202E4B2BD0F0FEA4+20240702154408.631201-1-wangyuli@uniontech.com Signed-off-by: Greg Kroah-Hartman

kcov, usb: disable interrupts in kcov_remote_start_usb_softirq

2024-06-21T12:40:11Z

commit f85d39dd7ed89ffdd622bc1de247ffba8d961504 upstream. After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with interrupts enabled. Thus, the remote coverage collection section in usb_giveback_urb_bh()-> __usb_hcd_giveback_urb() might be interrupted, and the interrupt handler might invoke __usb_hcd_giveback_urb() again. This breaks KCOV, as it does not support nested remote coverage collection sections within the same context (neither in task nor in softirq). Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the duration of the coverage collection section to avoid nested sections in the softirq context (in addition to such in the task context, which are already handled). Reported-by: Tetsuo Handa Closes: https://lore.kernel.org/linux-usb/0f4d1964-7397-485b-bc48-11c01e2fcbca@I-love.SAKURA.ne.jp/ Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Suggested-by: Alan Stern Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue") Cc: stable@vger.kernel.org Acked-by: Dmitry Vyukov Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/20240527173538.4989-1-andrey.konovalov@linux.dev Signed-off-by: Greg Kroah-Hartman

usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device

2024-04-30T16:05:27Z

A virtual SuperSpeed device in the FreeBSD BVCP package (https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256. It stopped working with Linux following a recent commit because now we check these sizes more carefully than before. Fix this regression by using the bMaxpacketSize0 value in the device descriptor for SuperSpeed or faster devices, even if it is invalid. This is a very simple-minded change; we might want to check more carefully for values that actually make some sense (for instance, no smaller than 64). Signed-off-by: Alan Stern Reported-and-tested-by: Roger Whittaker Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569 Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/ Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: core: Fix access violation during port device removal

2024-04-23T23:25:49Z

Testing with KASAN and syzkaller revealed a bug in port.c:disable_store(): usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to is concurrently removed, but the function does not check for this possibility before dereferencing the returned value. It turns out that the first dereference is unnecessary, since hub->intfdev is the parent of the port device, so it can be changed easily. Adding a check for hub == NULL prevents further problems. The same bug exists in the disable_show() routine, and it can be fixed the same way. Signed-off-by: Alan Stern Reported-and-tested-by: Yue Sun Reported-by: xingwei lee Link: https://lore.kernel.org/linux-usb/CAEkJfYON+ry7xPx=AiLR9jzUNT+i_Va68ACajOC3HoacOfL1ig@mail.gmail.com/ Fixes: f061f43d7418 ("usb: hub: port: add sysfs entry to switch port power") CC: Michael Grzeschik CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/393aa580-15a5-44ca-ad3b-6462461cd313@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: Disable USB3 LPM at shutdown

2024-04-04T15:00:08Z

SanDisks USB3 storage may disapper after system reboot: usb usb2-port3: link state change xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 usb usb2-port3: do warm reset, port only xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0 usb usb2-port3: not warm reset yet, waiting 50ms xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0 usb usb2-port3: not warm reset yet, waiting 200ms ... xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0 usb usb2-port3: not warm reset yet, waiting 200ms xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0 usb usb2-port3: not enabled, trying warm reset again... This is due to the USB device still cause port change event after xHCI is shuted down: xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001 xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling. xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0 xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling. xhci_hcd 0000:38:00.0: // Halt the HC xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling. xhci_hcd 0000:00:14.0: // Halt the HC xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1311 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203 xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 usb 2-3: device not accepting address 2, error -108 xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1271 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1 usb usb2-port3: not reset yet, waiting 60ms ACPI: PM: Preparing to enter system sleep state S5 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1 usb usb2-port3: not reset yet, waiting 200ms reboot: Restarting system The port change event is caused by LPM transition, so disabling LPM at shutdown to make sure the device is in U0 for warmboot. Signed-off-by: Kai-Heng Feng Cc: stable Link: https://lore.kernel.org/r/20240305065140.66801-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

USB: core: Fix deadlock in port "disable" sysfs attribute

2024-03-26T14:02:28Z

The show and store callback routines for the "disable" sysfs attribute file in port.c acquire the device lock for the port's parent hub device. This can cause problems if another process has locked the hub to remove it or change its configuration: Removing the hub or changing its configuration requires the hub interface to be removed, which requires the port device to be removed, and device_del() waits until all outstanding sysfs attribute callbacks for the ports have returned. The lock can't be released until then. But the disable_show() or disable_store() routine can't return until after it has acquired the lock. The resulting deadlock can be avoided by calling sysfs_break_active_protection(). This will cause the sysfs core not to wait for the attribute's callback routine to return, allowing the removal to proceed. The disadvantage is that after making this call, there is no guarantee that the hub structure won't be deallocated at any moment. To prevent this, we have to acquire a reference to it first by calling hub_get(). Signed-off-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/f7a8c135-a495-4ce6-bd49-405a45e7ea9a@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: core: Add hub_get() and hub_put() routines

2024-03-26T14:02:12Z

Create hub_get() and hub_put() routines to encapsulate the kref_get() and kref_put() calls in hub.c. The new routines will be used by the next patch in this series. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/604da420-ae8a-4a9e-91a4-2d511ff404fb@rowland.harvard.edu Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: core: Fix deadlock in usb_deauthorize_interface()

2024-03-26T10:02:47Z

Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device: It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback. Reported-and-tested by: Yue Sun Reported by: xingwei lee Signed-off-by: Alan Stern Link: https://lore.kernel.org/linux-usb/CAEkJfYO6jRVC8Tfrd_R=cjO0hguhrV31fDPrLrNOOHocDkPoAA@mail.gmail.com/#r Fixes: 310d2b4124c0 ("usb: interface authorization: SysFS part of USB interface authorization") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1c37eea1-9f56-4534-b9d8-b443438dc869@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman