Hosts the 0x221E linux distro kernel. https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-4.3.y 2015-07-22T21:46:50Z 2015-07-22T21:46:50Z Lu Baolu baolu.lu@linux.intel.com 2015-06-16T01:08:26Z urn:sha1:2d2a316765d956bc5cb6bb367b2ec52ca59ab8e9 Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed root hub. The intention of that change was to avoid touching usb core internal field, a.k.a. lpm_capable, and let usb core to set it by checking U1 and U2 exit latency values in the descriptor. Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately, root hub is a special usb device as it has no parent. Hub_port_init() will never be called for a root hub device. That means lpm_capable will by no means be set for the root hub. As the result, lpm isn't functional at all in Linux kernel. This patch add the code to check and set lpm_capable when registering a root hub device. It could be back-ported to kernels as old as v3.15, that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM."). Cc: stable@vger.kernel.org # 3.15 Reported-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-12-03T23:51:54Z Rafael J. Wysocki rafael.j.wysocki@intel.com 2014-11-29T22:47:05Z urn:sha1:ceb6c9c862c86423f41c1e20ecf8d454f837f519 After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-09-24T05:33:19Z Petr Mladek pmladek@suse.cz 2014-09-19T15:32:22Z urn:sha1:59d48b3f1fdf307115af38b91c3ea4ddb57b73a2 USB hub started to use a workqueue instead of kthread. Let's make it clear from the function names. Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-05-27T23:51:51Z Dan Williams dan.j.williams@intel.com 2014-05-21T01:09:31Z urn:sha1:7e73be227b1510a2ba1391185be7cc357e2226ef Per Alan: "You mean from within hub_handle_remote_wakeup()? That routine will never get called if CONFIG_PM_RUNTIME isn't enabled, because khubd never sees wakeup requests if they arise during system suspend. In fact, that routine ought to go inside the "#ifdef CONFIG_PM_RUNTIME" portion of hub.c, along with the other suspend/resume code." Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-05-27T23:38:52Z Dan Williams dan.j.williams@intel.com 2014-05-21T01:08:40Z urn:sha1:3bfd659baec822f54e4acb0734669e671d853a35 ACPI identifies peer ports by setting their 'group_token' and 'group_position' _PLD data to the same value. If a platform has tier mismatch [1] , ACPI can override the default (USB3 defined) peer port association for internal hubs. External hubs follow the default peer association scheme. Location data is cached as an opaque cookie in usb_port_location data. Note that we only consider the group_token and group_position attributes from the _PLD data as ACPI specifies that group_token is a unique identifier. When we find port location data for a port then we assume that the firmware will also describe its peer port. This allows the implementation to only ever set the peer once. This leads to a question about what happens when a pm runtime event occurs while the peer associations are still resolving. Since we only ever set the peer information once, a USB3 port needs to be prevented from suspending while its ->peer pointer is NULL (implemented in a subsequent patch). There is always the possibility that firmware mis-identifies the ports, but there is not much the kernel can do in that case. [1]: xhci 1.1 appendix D figure 131 [2]: acpi 5 section 6.1.8 [alan]: don't do default peering when acpi data present Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-05-27T23:38:52Z Dan Williams dan.j.williams@intel.com 2014-05-21T01:08:28Z urn:sha1:d8521afe35862f4fbe3ccd6ca37897c0a304edf3 Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-05-27T23:35:10Z Dan Williams dan.j.williams@intel.com 2014-05-21T01:08:17Z urn:sha1:d99f6b41308779244662109a9c2bad09a82e8ac6 The current port name "portX" is ambiguous. Before adding more port messages rename ports to "<hub-device-name>-portX" This is an ABI change, but the suspicion is that it will go unnoticed as the port power control implementation has been broken since its introduction. If however, someone was relying on the old name we can add sysfs links from the old name to the new name. Additionally, it unifies/simplifies port dev_printk messages and modifies instances of: dev_XXX(hub->intfdev, ..."port %d"... dev_XXX(&hdev->dev, ..."port%d"... into: dev_XXX(&port_dev->dev, ... Now that the names are unique usb_port devices it would be nice if they could be included in /sys/bus/usb. However, it turns out that this breaks 'lsusb -t'. For now, create a dummy port driver so that print messages are prefixed "usb 1-1-port3" rather than the subsystem-ambiguous " 1-1-port3". Finally, it corrects an odd usage of sscanf("port%d") in usb-acpi.c. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-04-02T00:06:09Z Linus Torvalds torvalds@linux-foundation.org 2014-04-02T00:06:09Z urn:sha1:3e75c6de1ac33fe3500f44573d9212dc82c99f59 Pull USB patches from Greg KH: "Here's the big USB pull request for 3.15-rc1. The normal set of patches, lots of controller driver updates, and a smattering of individual USB driver updates as well. All have been in linux-next for a while" * tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits) xhci: Transition maintainership to Mathias Nyman. USB: disable reset-resume when USB_QUIRK_RESET is set USB: unbind all interfaces before rebinding any usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210 usb: gadget: tcm_usb_gadget: stop format strings usb: gadget: f_fs: add missing spinlock and mutex unlock usb: gadget: composite: switch over to ERR_CAST() usb: gadget: inode: switch over to memdup_user() usb: gadget: f_subset: switch over to PTR_RET usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence USB: keyspan: remove dead debugging code USB: serial: add missing newlines to dev_<level> messages. USB: serial: add missing braces USB: serial: continue to write on errors USB: serial: continue to read on errors USB: serial: make bulk_out_size a lower limit USB: cypress_m8: fix potential scheduling while atomic devicetree: bindings: document lsi,zevio-usb usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs ... 2014-03-17T23:08:27Z Alan Stern stern@rowland.harvard.edu 2014-03-12T15:30:38Z urn:sha1:6aec044cc2f5670cf3b143c151c8be846499bd15 When a driver doesn't have pre_reset, post_reset, or reset_resume methods, the USB core unbinds that driver when its device undergoes a reset or a reset-resume, and then rebinds it afterward. The existing straightforward implementation can lead to problems, because each interface gets unbound and rebound before the next interface is handled. If a driver claims additional interfaces, the claim may fail because the old binding instance may still own the additional interface when the new instance tries to claim it. This patch fixes the problem by first unbinding all the interfaces that are marked (i.e., their needs_binding flag is set) and then rebinding all of them. The patch also makes the helper functions in driver.c a little more uniform and adjusts some out-of-date comments. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: "Poulain, Loic" <loic.poulain@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-03-10T16:54:56Z Valentina Manea valentina.manea.m@gmail.com 2014-03-10T08:36:40Z urn:sha1:9b6f0c4b98171f2a354e1e461fefa90ec2baafa6 Since it is needed outside usbcore and exposed in include/linux/usb.h, it conflicts with enum dev_state in rt2x00 wireless driver. Mark it as usb specific to avoid conflicts in the future. Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>