kernel/drivers/usb/core/usb.h, branch linux-4.16.y

usb: core: add support for USB_REQ_SET_ISOCH_DELAY

2017-12-15T19:45:43Z

USB SS and SSP hubs provide wHubDelay values on their hub descriptor which we should inform the USB Device about. The USB Specification 3.0 explains, on section 9.4.11, how to calculate the value and how to issue the request. Note that a USB_REQ_SET_ISOCH_DELAY is valid on all device states (Default, Address, Configured), we just *chose* to issue it from Address state right after successfully fetching the USB Device Descriptor. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: core: move existing SPDX tags to top of the file

2017-11-03T09:12:26Z

To match the rest of the kernel, the SPDX tags for the drivers/usb/core/ files are moved to the first line of the file. This makes it more obvious the tag is present as well as making it match the other 12k files in the tree with this location. It also uses // to match the "expected style" as well. Signed-off-by: Greg Kroah-Hartman

USB: Force disconnect Huawei 4G modem during suspend

2017-10-23T09:32:34Z

When going into S3 suspend, the Acer TravelMate P648-M and P648-G3 laptops immediately wake up 3-4 seconds later for no obvious reason. Unbinding the integrated Huawei 4G LTE modem before suspend avoids the issue, even though we are not using the modem at all (checked from rescue.target/runlevel1). The problem also occurs when the option and cdc-ether modem drivers aren't loaded; it reproduces just with the base usb driver. Under Windows the system can suspend fine. Seeking a better fix, we've tried a lot of things, including: - Check that the device's power/wakeup is disabled - Check that remote wakeup is off at the USB level - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME, USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM. but none of that makes any difference. There are no errors in the logs showing any suspend/resume-related issues. When the system wakes up due to the modem, log-wise it appears to be a normal resume. Introduce a quirk to disable the port during suspend when the modem is detected. The modem from the P648-G3 model is: T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=04 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=12d1 ProdID=15c3 Rev= 1.02 S: Manufacturer=Huawei Technologies Co., Ltd. S: Product=HUAWEI Mobile S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver= E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver= E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver= E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver= E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I: If#= 3 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=16 Driver= E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver= E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms C:* #Ifs= 6 Cfg#= 2 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr= 2mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver= E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=2ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Based on an earlier patch by Chris Chiu. Signed-off-by: Daniel Drake Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: core: add missing license information to some files

2016-10-29T16:51:56Z

Some of the USB core files were missing explicit license information. As all files in the kernel tree are implicitly licensed under the GPLv2-only, be explicit in case someone get confused looking at individual files by using the SPDX nomenclature. Signed-off-by: Greg Kroah-Hartman

usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices

2016-01-25T04:16:52Z

Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: interface authorization: Introduces the USB interface authorization

2015-09-22T19:08:40Z

The kernel supports the device authorization because of wireless USB. These is usable for wired USB devices, too. These new interface authorization allows to enable or disable individual interfaces instead a whole device. If a deauthorized interface will be authorized so the driver probing must be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe Signed-off-by: Stefan Koch Signed-off-by: Greg Kroah-Hartman

usb: core: lpm: set lpm_capable for root hub device

2015-07-22T21:46:50Z

Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed root hub. The intention of that change was to avoid touching usb core internal field, a.k.a. lpm_capable, and let usb core to set it by checking U1 and U2 exit latency values in the descriptor. Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately, root hub is a special usb device as it has no parent. Hub_port_init() will never be called for a root hub device. That means lpm_capable will by no means be set for the root hub. As the result, lpm isn't functional at all in Linux kernel. This patch add the code to check and set lpm_capable when registering a root hub device. It could be back-ported to kernels as old as v3.15, that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM."). Cc: stable@vger.kernel.org # 3.15 Reported-by: Kevin Strasser Signed-off-by: Lu Baolu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB / PM: Drop CONFIG_PM_RUNTIME from the USB core

2014-12-03T23:51:54Z

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Acked-by: Greg Kroah-Hartman

usb: hub: rename usb_kick_khubd() to usb_kick_hub_wq()

2014-09-24T05:33:19Z

USB hub started to use a workqueue instead of kthread. Let's make it clear from the function names. Signed-off-by: Petr Mladek Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y

2014-05-27T23:51:51Z

Per Alan: "You mean from within hub_handle_remote_wakeup()? That routine will never get called if CONFIG_PM_RUNTIME isn't enabled, because khubd never sees wakeup requests if they arise during system suspend. In fact, that routine ought to go inside the "#ifdef CONFIG_PM_RUNTIME" portion of hub.c, along with the other suspend/resume code." Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman