kernel/drivers/usb/core/usb.c, branch linux-4.3.y

USB: Move usb_disabled() towards top of the file

2015-03-26T09:48:22Z

Move usb_disabled() and module_param()/core_param() towards the top of the file, where 'nousb' is defined, as they are all related. Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

USB: Use usb_disabled() consistently

2015-03-26T09:48:22Z

At few places we have used usb_disabled() and at other places used 'nousb' directly. Lets be consistent and use usb_disabled(); Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

2015-01-09T18:21:31Z

the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB / PM: Drop CONFIG_PM_RUNTIME from the USB core

2014-12-03T23:51:54Z

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Acked-by: Greg Kroah-Hartman

USB: Add EXPORT_SYMBOL for usb_alloc_dev

2014-07-18T00:11:09Z

usb_alloc_dev is used by lvstest driver now which can be built as module. Therefore export usb_alloc_dev symbol. Signed-off-by: Pratyush Anand Signed-off-by: Greg Kroah-Hartman

drivers: usb: core: {file,hub,sysfs,usb}.c: Whitespace fixes

2013-10-12T00:02:37Z

including: - removing of trailing whitespace - removing spaces before array indexing (foo [] to foo[]) - reindention of a switch-case block - spaces to tabs Signed-off-by: Matthias Beyer Signed-off-by: Greg Kroah-Hartman

usb: fix some scripts/kernel-doc warnings

2013-08-03T03:30:14Z

When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi Signed-off-by: Greg Kroah-Hartman

usb: ehci: Only sleep for post-resume handover if devices use persist

2013-05-20T18:28:55Z

The current EHCI code sleeps a flat 110ms in the resume path if there was a USB 1.1 device connected to its companion controller during suspend, waiting for the device to reappear and reset so that it can be handed back to the companion. This is necessary if the device uses persist, so that the companion controller can actually see it during its own resume path. However, if the device doesn't use persist, this is entirely unnecessary. We might just as well ignore it and have the normal device detection/reset/handoff code handle it asynchronously when it eventually shows up. As USB 1.1 devices are almost exclusively HIDs these days (for which persist has no value), this can allow distros to shave another tenth of a second off their resume time. In order to enable this optimization, the patch also adds a new usb_for_each_dev() iterator that is exported by the USB core and wraps bus_for_each_dev() with the logic to differentiate between struct usb_device and struct usb_interface on the usb_bus_type bus. Signed-off-by: Julius Werner Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2013-04-29T19:19:23Z

Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...

driver core: handle user namespaces properly with the uid/gid devtmpfs change

2013-04-11T18:43:29Z

Now that devtmpfs is caring about uid/gid, we need to use the correct internal types so users who have USER_NS enabled will have things work properly for them. Thanks to Eric for pointing this out, and the patch review. Reported-by: Eric W. Biederman Cc: Kay Sievers Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman