kernel/drivers/usb/core/hub.c, branch linux-6.9.y

usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device

2024-04-30T16:05:27Z

A virtual SuperSpeed device in the FreeBSD BVCP package (https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256. It stopped working with Linux following a recent commit because now we check these sizes more carefully than before. Fix this regression by using the bMaxpacketSize0 value in the device descriptor for SuperSpeed or faster devices, even if it is invalid. This is a very simple-minded change; we might want to check more carefully for values that actually make some sense (for instance, no smaller than 64). Signed-off-by: Alan Stern Reported-and-tested-by: Roger Whittaker Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569 Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/ Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: core: Add hub_get() and hub_put() routines

2024-03-26T14:02:12Z

Create hub_get() and hub_put() routines to encapsulate the kref_get() and kref_put() calls in hub.c. The new routines will be used by the next patch in this series. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/604da420-ae8a-4a9e-91a4-2d511ff404fb@rowland.harvard.edu Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge 6.8-rc3 into usb-next

2024-02-04T14:19:37Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: core: add phy notify connect and disconnect

2024-01-28T01:36:14Z

In Realtek SoC, the parameter of usb phy is designed to can dynamic tuning base on port status. Therefore, add a notify callback of generic phy driver when usb device connect and disconnect change. The Realtek phy driver is designed to dynamically adjust disconnection level and calibrate phy parameters. When the device connected bit changes and when the disconnected bit changes, do connection change notification: Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is USB_PORT_STAT_C_CONNECTION. 1. The device is connected, the driver lowers the disconnection level and calibrates the phy parameters. 2. The device disconnects, the driver increases the disconnect level and calibrates the phy parameters. Generic phy driver in usb core framework does not support device connect and disconnect notifications. Therefore, we add an api to notify phy the connection changes. Additionally, the generic phy only specifies primary_hcd in the original design. Added specific "usb2-phy" on primary_hcd and "usb3-phy" on shared_hcd. Signed-off-by: Stanley Chang Link: https://lore.kernel.org/r/20231213031203.4911-4-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman

USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT

2024-01-28T00:39:54Z

The OTG 1.3 spec has the feature A_ALT_HNP_SUPPORT, which tells a device that it is connected to the wrong port. Some devices refuse to operate if you enable that feature, because it indicates to them that they ought to request to be connected to another port. According to the spec this feature may be used based only the following three conditions: 6.5.3 a_alt_hnp_support Setting this feature indicates to the B-device that it is connected to an A-device port that is not capable of HNP, but that the A-device does have an alternate port that is capable of HNP. The A-device is required to set this feature under the following conditions: • the A-device has multiple receptacles • the A-device port that connects to the B-device does not support HNP • the A-device has another port that does support HNP A check for the third and first condition is missing. Add it. Signed-off-by: Oliver Neukum Cc: stable Fixes: 7d2d641c44269 ("usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 device") Link: https://lore.kernel.org/r/20240122153545.12284-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

usb: core: Prevent null pointer dereference in update_port_device_state

2024-01-28T00:38:39Z

Currently, the function update_port_device_state gets the usb_hub from udev->parent by calling usb_hub_to_struct_hub. However, in case the actconfig or the maxchild is 0, the usb_hub would be NULL and upon further accessing to get port_dev would result in null pointer dereference. Fix this by introducing an if check after the usb_hub is populated. Fixes: 83cb2604f641 ("usb: core: add sysfs entry for usb device state") Cc: stable@vger.kernel.org Signed-off-by: Udipto Goswami Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20240110095814.7626-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub

2023-12-06T03:37:07Z

There is a potential delay in notifying Linux USB drivers of downstream USB bus activity when connecting a high-speed or superSpeed device via the Microchip USB491x hub. This delay is due to the fixed bInterval value of 12 in the silicon of the Microchip USB491x hub. Microchip requested to ignore the device descriptor and decrease that value to 9 as it was too late to modify that in silicon. This patch speeds up the USB enummeration process that helps to pass Apple Carplay certifications and improve the User experience when utilizing the USB device via Microchip Multihost USB491x Hub. A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up the notification process for Microchip USB491x hub by limiting the maximum bInterval value to 9. Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231205181829.127353-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Replace hardcoded quirk value with BIT() macro

2023-12-06T03:36:05Z

This patch replaces the hardcoded quirk value in the macro with BIT(). Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman

Merge 6.7-rc3 into usb-next

2023-11-27T09:23:49Z

We need the USB/PHY/Thunderbolt fixes in here as well for later patches to build on top of. Signed-off-by: Greg Kroah-Hartman

usb: new quirk to reduce the SET_ADDRESS request timeout

2023-11-23T12:32:44Z

This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman