kernel/drivers/tty/serial/sprd_serial.c, branch linux-5.1.y

serial: sprd: Modify the baud rate calculation formula

2019-02-26T11:35:02Z

When the source clock is not divisible by the expected baud rate and the remainder is not less than half of the expected baud rate, the old formular will round up the frequency division coefficient. This will make the actual baud rate less than the expected value and can not meet the external transmission requirements. Thus this patch modifies the baud rate calculation formula to support the serial controller output the maximum baud rate. Signed-off-by: Lanqing Liu Signed-off-by: Baolin Wang Signed-off-by: Greg Kroah-Hartman

serial: sprd: Fix the indentation issue

2018-09-18T14:07:24Z

Make the macros' definition and code have the same correct indentation. Signed-off-by: Baolin Wang Acked-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman

serial: sprd: Change 'int' to 'unsigned int'

2018-09-18T14:07:24Z

The register offset value should be 'unsigned int' type. Moreover, prefer 'unsigned int' to bare use of 'unsigned'. Signed-off-by: Baolin Wang Acked-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman

serial: sprd: Remove unnecessary resource validation

2018-09-18T14:07:24Z

The devm_ioremap_resource() will valid the resources, thus remove the unnecessary resource validation in the driver. Signed-off-by: Baolin Wang Acked-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman

serial: sprd: Use readable macros instead of magic number

2018-09-18T14:07:24Z

Define readable macros instead of magic number to make code more readable. Signed-off-by: Baolin Wang Acked-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman

serial: sprd: Remove unused structure

2018-09-18T14:07:24Z

Remove the unused reg_backup structure. Signed-off-by: Baolin Wang Acked-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman

tty: serial: Remove redundant license text

2017-11-08T12:08:12Z

Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Chris Metcalf Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Signed-off-by: Greg Kroah-Hartman

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Metcalf Cc: Jiri Kosina Cc: David Sterba Cc: James Hogan Cc: Rob Herring Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: "Uwe Kleine-König" Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

tty: serial: sprd: fix error return code in sprd_probe()

2017-08-28T18:51:19Z

platform_get_irq() returns an error code, but the sprd_serial driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

serial: sprd: clear timeout interrupt only rather than all interrupts

2017-07-30T14:37:25Z

On Spreadtrum's serial device, nearly all of interrupts would be cleared by hardware except timeout interrupt. This patch removed the operation of clearing all interrupt in irq handler, instead added an if statement to check if the timeout interrupt is supposed to be cleared. Wrongly clearing timeout interrupt would lead to uart data stay in rx fifo, that means the driver cannot read them out anymore. Signed-off-by: Lanqing Liu Signed-off-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman