kernel/drivers/tty/serial/serial_txx9.c, branch linux-6.9.y

serial: txx9: Add missing #include

2024-01-28T03:05:39Z

drivers/tty/serial/serial_txx9.c:933:12: error: no previous prototype for ‘early_serial_txx9_setup’ [-Werror=missing-prototypes] 933 | int __init early_serial_txx9_setup(struct uart_port *port) | ^~~~~~~~~~~~~~~~~~~~~~~ This function is called from arch/mips/txx9/generic/setup.c, and does have a forward declaration in arch/mips/include/asm/txx9/generic.h. As the TXX9 serial driver does not support compile-testing, and thus can only be built on MIPS, fix this by including the MIPS-only header file. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/818be2380061c19fe65819f7b7f10ab6e7aaa082.1706040343.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

serial: txx9: Convert to platform remove callback returning void

2023-11-23T19:12:34Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231110152927.70601-38-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

serial: txx9: Use port lock wrappers

2023-09-18T09:18:14Z

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-60-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04Z

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: serial: use uart_port_tx_limited()

2022-11-03T02:32:40Z

uart_port_tx_limited() is a new helper to send characters to the device. Use it in these drivers. mux.c also needs to define tx_done(). But I'm not sure if the driver really wants to wait for all the characters to dismiss from the HW fifo at this code point. Hence I marked this as FIXME. Cc: Russell King Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: "Pali Rohár" Cc: Kevin Cernekee Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: linux-riscv@lists.infradead.org Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby (SUSE) Link: https://lore.kernel.org/r/20221004104927.14361-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35Z

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: txx9: Don't allow CS5-6

2022-05-19T16:32:40Z

Only CS7 and CS8 are supported but CSIZE is not sanitized with CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

tty: serial: serial_txx9: remove struct uart_txx9_port

2022-03-18T12:13:17Z

It's only a wrapper to struct uart_port, so unwrap the whole code. No change in functionality is intended. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220307054348.31748-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

serial: make uart_console_write->putchar()'s character an unsigned char

2022-03-03T14:06:31Z

Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Karol Gugala Cc: Mateusz Holenko Cc: Vladimir Zapolskiy Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Taichi Sugaya Cc: Takao Orito Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: "Andreas Färber" Cc: Manivannan Sadhasivam Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Andy Gross Cc: Bjorn Andersson Cc: Krzysztof Kozlowski Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Michal Simek Acked-by: Richard Genoud [atmel_serial] Acked-by: Uwe Kleine-König Acked-by: Paul Cercueil Acked-by: Neil Armstrong # meson_serial Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: serial: serial_txx9: remove info print from init

2022-02-25T09:38:21Z

Remove the hello print among with version and name definitions. Drivers should print nothing if they are successful. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220224111028.20917-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman