kernel/drivers/tty/serial/serial-tegra.c, branch linux-6.9.y

serial: tegra: Convert to platform remove callback returning void

2023-11-23T19:12:34Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231110152927.70601-37-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

serial: tegra: Use port lock wrappers

2023-09-18T09:18:14Z

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-57-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

serial: tegra: handle clk prepare error in tegra_uart_hw_init()

2023-08-22T13:29:18Z

In tegra_uart_hw_init(), the return value of clk_prepare_enable() should be checked since it might fail. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Signed-off-by: Yi Yang Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman

serial: tegra: Use devm_platform_get_and_ioremap_resource()

2023-07-25T18:26:06Z

Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li Link: https://lore.kernel.org/r/20230712062853.11007-5-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman

serial: tegra: Don't print error on probe deferral

2023-07-25T18:19:39Z

If the Tegra serial driver is probe before clocks are available then the following error is seen on boot: serial-tegra 3100000.serial: Couldn't get the clock This has been observed on Jetson AGX Orin. Fix this by calling dev_err_probe() instead of dev_err() to avoid printing an error on probe deferral. Signed-off-by: Jon Hunter Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20230703113759.75608-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman

tty: Explicitly include correct DT includes

2023-07-25T18:19:05Z

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Acked-by: Uwe Kleine-König # for imx Link: https://lore.kernel.org/r/20230724205440.767071-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04Z

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()

2023-01-19T14:54:01Z

Add the missing clk_disable_unprepare() before return from tegra_uart_hw_init() in the error handling path. When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk' has been enabled, fix it by adding clk_disable_unprepare(). Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs") Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Signed-off-by: Yi Yang Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman

serial: tegra: Read DMA status before terminating

2022-11-03T02:43:03Z

Read the DMA status before terminating the DMA, as doing so deletes the DMA desc. Also, to get the correct transfer status information, pause the DMA using dmaengine_pause() before reading the DMA status. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Reviewed-by: Jon Hunter Reviewed-by: Ilpo Järvinen Acked-by: Thierry Reding Signed-off-by: Akhil R Signed-off-by: Kartik Link: https://lore.kernel.org/r/1666105086-17326-1-git-send-email-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman

serial: tegra: Use uart_xmit_advance()

2022-11-03T02:35:42Z

Take advantage of the new uart_xmit_advance() helper. Reviewed-by: Thierry Reding Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221019091151.6692-32-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman