kernel/drivers/tty/serial/sccnxp.c, branch linux-6.9.y

serial: sccnxp: Convert to platform remove callback returning void

2023-11-23T19:12:34Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231110152927.70601-36-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Improve error message if regulator_disable() fails

2023-11-23T19:12:30Z

Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So replace the error return (and with it the little helpful error message) by a more useful error message. Fixes: 31815c08fc90 ("serial: sccnxp: Replace pdata.init/exit with regulator API") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231110152927.70601-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Use devm_platform_get_and_ioremap_resource()

2023-07-25T18:26:07Z

Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li Link: https://lore.kernel.org/r/20230712062853.11007-11-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04Z

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Use devm_clk_get_enabled() helper

2023-01-19T14:51:28Z

The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code. This also avoids some other warnings/issues. (see [1]) [1]: https://lore.kernel.org/all/20221118233101.never.215-kees@kernel.org/ Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/735a807c2df835aa436dcbc76b374f983f89a9af.1672419577.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Use uart_xmit_advance()

2022-11-03T02:35:42Z

Take advantage of the new uart_xmit_advance() helper. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221019091151.6692-31-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35Z

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: make uart_console_write->putchar()'s character an unsigned char

2022-03-03T14:06:31Z

Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Karol Gugala Cc: Mateusz Holenko Cc: Vladimir Zapolskiy Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Taichi Sugaya Cc: Takao Orito Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: "Andreas Färber" Cc: Manivannan Sadhasivam Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Andy Gross Cc: Bjorn Andersson Cc: Krzysztof Kozlowski Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Michal Simek Acked-by: Richard Genoud [atmel_serial] Acked-by: Uwe Kleine-König Acked-by: Paul Cercueil Acked-by: Neil Armstrong # meson_serial Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/serial: Migrate sccnxp to use has_sysrq

2019-12-18T14:05:00Z

The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Signed-off-by: Dmitry Safonov Link: https://lore.kernel.org/r/20191213000657.931618-40-dima@arista.com Signed-off-by: Greg Kroah-Hartman

tty: Remove dev_err() usage after platform_get_irq()

2019-09-04T10:43:49Z

We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman