kernel/drivers/tty/serial/pic32_uart.c, branch linux-6.9.y

serial: pic32: Convert to platform remove callback returning void

2023-11-23T19:12:33Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231110152927.70601-31-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

serial: pic32: Use port lock wrappers

2023-09-18T09:18:13Z

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-47-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

tty: Explicitly include correct DT includes

2023-07-25T18:19:05Z

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Acked-by: Uwe Kleine-König # for imx Link: https://lore.kernel.org/r/20230724205440.767071-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: pic32: Add checks for devm_clk_get() in pic32_uart_probe()

2023-01-19T15:02:23Z

As the devm_clk_get() may return ERR_PTR, its return value needs to be checked to avoid invalid poineter dereference. Signed-off-by: Yuan Can Link: https://lore.kernel.org/r/20221125093832.33386-1-yuancan@huawei.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-12-16T11:31:56Z

Pull tty/serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver changes for 6.2-rc1. As in previous kernel releases, nothing big here at all, just some small incremental serial/tty layer cleanups and some individual driver additions and fixes. Highlights are: - serial helper macros from Jiri Slaby to reduce the amount of duplicated code in serial drivers - api cleanups and consolidations from Ilpo Järvinen in lots of serial drivers - the usual set of n_gsm fixes from Daniel Starke as that code gets exercised more - TIOCSTI is finally able to be disabled if requested (security hardening feature from Kees Cook) - fsl_lpuart driver fixes and features added - other small serial driver additions and fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: atmel: don't stop the transmitter when doing PIO serial: atmel: cleanup atmel_start+stop_tx() tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API serial: sunsab: Fix error handling in sunsab_init() serial: altera_uart: fix locking in polling mode serial: pch: Fix PCI device refcount leak in pch_request_dma() tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused tty: serial: fsl_lpuart: Add runtime pm support tty: serial: fsl_lpuart: enable wakeup source for lpuart serdev: Replace poll loop by readx_poll_timeout() macro tty: synclink_gt: unwind actions in error path of net device open serial: stm32: move dma_request_chan() before clk_prepare_enable() dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity' serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle. serial: amba-pl011: avoid SBSA UART accessing DMACR register tty: serial: altera_jtaguart: remove struct altera_jtaguart tty: serial: altera_jtaguart: use uart_port::read_status_mask tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars() n_tty: Rename tail to old_tail in n_tty_read() ...

tty: serial: pic32_uart: use console_is_registered()

2022-12-02T10:25:01Z

It is not reliable to check for CON_ENABLED in order to identify if a console is registered. Use console_is_registered() instead. Signed-off-by: John Ogness Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20221116162152.193147-28-john.ogness@linutronix.de

serial_core: replace uart_console_enabled() with uart_console_registered()

2022-12-02T10:25:01Z

All users of uart_console_enabled() really want to know if a console is registered. It is not reliable to check for CON_ENABLED in order to identify if a console is registered. Use console_is_registered() instead. A _locked() variant is provided because uart_set_options() is always called with the console_list_lock held and must check if a console is registered in order to synchronize with kgdboc. Signed-off-by: John Ogness Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20221116162152.193147-23-john.ogness@linutronix.de

serial: pic32: Use uart_xmit_advance()

2022-11-03T02:35:42Z

Take advantage of the new uart_xmit_advance() helper. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221019091151.6692-26-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35Z

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: pic32_uart: Convert to use GPIO descriptors

2022-08-30T11:27:55Z

Plain global GPIO numbering schema is deprecated and is being removed from the kernel. Convert this driver to use a new GPIO descriptor based schema. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220806225643.40897-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman