kernel/drivers/tty/serial/omap-serial.c, branch 0x221E-v0.0.1-v6.19

serial: Switch back to struct platform_driver::remove()

2024-10-11T06:13:28Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/tty/serial to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20241007205803.444994-7-u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman

serial: omap: remove redundant assignment to variable tmout

2024-04-11T12:08:36Z

Variable tmout is being assigned a value that is never read, it is being re-assinged in the following for-loop statement. The assignment is redundant and can be removed. Cleans up clang scan warning: drivers/tty/serial/omap-serial.c:1096:3: warning: Value stored to 'tmout' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20240411085537.306020-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: omap: Use uart_prepare_sysrq_char().

2024-03-02T21:06:21Z

The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT. The driver splits the locking function into two parts: local_irq_save() and uart_port_lock() and this breaks PREEMPT_RT. Delay handling sysrq until port lock is dropped. Remove the special case in the console write routine an always use the complete locking function. Signed-off-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20240301215246.891055-7-bigeasy@linutronix.de Signed-off-by: Greg Kroah-Hartman

serial: omap: do not override settings for RS485 support

2024-01-04T15:29:51Z

The drivers RS485 support is deactivated if there is no RTS GPIO available. This is done by nullifying the ports rs485_supported struct. After that however the settings in serial_omap_rs485_supported are assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support. Fix this by moving the assignment to the beginning of serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets called. Also replace the assignment of rs485_config() to have the complete RS485 setup in one function. Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: Signed-off-by: Lino Sanfilippo Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman

serial: omap: Convert to platform remove callback returning void

2023-11-23T19:12:33Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231110152927.70601-29-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

serial: omap: Use port lock wrappers

2023-09-18T09:18:13Z

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-44-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-09-01T16:38:00Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...

drm/i915: Move abs_diff() to math.h

2023-08-18T17:18:59Z

abs_diff() belongs to math.h. Move it there. This will allow others to use it. [andriy.shevchenko@linux.intel.com: add abs_diff() documentation] Link: https://lkml.kernel.org/r/20230804050934.83223-1-andriy.shevchenko@linux.intel.com [akpm@linux-foundation.org: fix comment, per Randy] Link: https://lkml.kernel.org/r/20230803131918.53727-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Reviewed-by: Jiri Slaby # tty/serial Acked-by: Jani Nikula Acked-by: Greg Kroah-Hartman Reviewed-by: Andi Shyti Reviewed-by: Philipp Zabel # gpu/ipu-v3 Cc: Alexey Dobriyan Cc: Daniel Vetter Cc: David Airlie Cc: Helge Deller Cc: Imre Deak Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rasmus Villemoes Cc: Rodrigo Vivi Cc: Tvrtko Ursulin Cc: Randy Dunlap Signed-off-by: Andrew Morton

serial: omap: Use devm_platform_get_and_ioremap_resource()

2023-07-25T18:26:06Z

Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li Link: https://lore.kernel.org/r/20230712062853.11007-6-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04Z

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman