kernel/drivers/tty/serial/ip22zilog.c, branch linux-6.9.y

serial: ip22zilog: Use port lock wrappers

2023-09-18T09:18:11Z

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-31-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04Z

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: ip22zilog: Use uart_xmit_advance()

2022-11-03T02:35:41Z

Take advantage of the new uart_xmit_advance() helper. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221019091151.6692-19-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35Z

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: make uart_console_write->putchar()'s character an unsigned char

2022-03-03T14:06:31Z

Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Karol Gugala Cc: Mateusz Holenko Cc: Vladimir Zapolskiy Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Taichi Sugaya Cc: Takao Orito Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: "Andreas Färber" Cc: Manivannan Sadhasivam Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Andy Gross Cc: Bjorn Andersson Cc: Krzysztof Kozlowski Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Michal Simek Acked-by: Richard Genoud [atmel_serial] Acked-by: Uwe Kleine-König Acked-by: Paul Cercueil Acked-by: Neil Armstrong # meson_serial Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: serial: ip22zilog: include instead of

2021-05-13T16:29:12Z

Include the more general linux/io.h instead of asm/io.h as checkpatch suggests. Signed-off-by: Zihao Tang Signed-off-by: Jay Fang Link: https://lore.kernel.org/r/1620874904-39285-5-git-send-email-f.fangjian@huawei.com Signed-off-by: Greg Kroah-Hartman

tty/serial: Migrate ip22zilog to use has_sysrq

2019-12-18T14:04:50Z

The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Signed-off-by: Dmitry Safonov Link: https://lore.kernel.org/r/20191213000657.931618-21-dima@arista.com Signed-off-by: Greg Kroah-Hartman

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Metcalf Cc: Jiri Kosina Cc: David Sterba Cc: James Hogan Cc: Rob Herring Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: "Uwe Kleine-König" Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

tty: serial: constify uart_ops structures

2017-01-27T08:23:36Z

Declare uart_ops structures as const as they are only stored in the ops field of an uart_port structure. This field is of type const, so uart_ops structures having this property can be made const too. File size details before and after patching. First line of every .o file shows the file size before patching and second line shows the size after patching. text data bss dec hex filename 2977 456 64 3497 da9 drivers/tty/serial/amba-pl010.o 3169 272 64 3505 db1 drivers/tty/serial/amba-pl010.o 3109 456 0 3565 ded drivers/tty/serial/efm32-uart.o 3301 272 0 3573 df5 drivers/tty/serial/efm32-uart.o 10668 753 1 11422 2c9e drivers/tty/serial/icom.o 10860 561 1 11422 2c9e drivers/tty/serial/icom.o 23904 408 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 24088 224 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 10516 560 4 11080 2b48 drivers/tty/serial/ioc4_serial.o 10709 368 4 11081 2b49 drivers/tty/serial/ioc4_serial.o 7853 648 1216 9717 25f5 drivers/tty/serial/mpsc.o 8037 456 1216 9709 25ed drivers/tty/serial/mpsc.o 10248 456 0 10704 29d0 drivers/tty/serial/omap-serial.o 10440 272 0 10712 29d8 drivers/tty/serial/omap-serial.o 8122 532 1984 10638 298e drivers/tty/serial/pmac_zilog.o 8306 340 1984 10630 2986 drivers/tty/serial/pmac_zilog.o 3808 456 0 4264 10a8 drivers/tty/serial/pxa.o 4000 264 0 4264 10a8 drivers/tty/serial/pxa.o 21781 3864 0 25645 642d drivers/tty/serial/serial-tegra.o 22037 3608 0 25645 642d drivers/tty/serial/serial-tegra.o 2481 456 96 3033 bd9 drivers/tty/serial/sprd_serial.o 2673 272 96 3041 be1 drivers/tty/serial/sprd_serial.o 5534 300 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 5630 204 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 6730 1576 128 8434 20f2 drivers/tty/serial/vt8500_serial.o 6986 1320 128 8434 20f2 drivers/tty/serial/vt8500_serial.o Cross compiled for mips architecture. 3005 488 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 3189 304 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 4272 196 1056 5524 1594 drivers/tty/serial/dz.o 4368 100 1056 5524 1594 drivers/tty/serial/dz.o 6551 144 16 6711 1a37 drivers/tty/serial/ip22zilog.o 6647 48 16 6711 1a37 drivers/tty/serial/ip22zilog.o 9612 428 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 9708 332 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 4156 296 16 4468 1174 drivers/tty/serial/ar933x_uart.o 4252 200 16 4468 1174 drivers/tty/serial/ar933x_uart.o Cross compiled for arm archiecture. 11716 1780 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 11808 1688 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 13352 596 56 14004 36b4 drivers/tty/serial/amba-pl011.o 13444 504 56 14004 36b4 drivers/tty/serial/amba-pl011.o Cross compiled for sparc architecture. 4664 528 32 5224 1468 drivers/tty/serial/sunhv.o 4848 344 32 5224 1468 drivers/tty/serial/sunhv.o 8080 332 28 8440 20f8 drivers/tty/serial/sunzilog.o 8184 228 28 8440 20f8 drivers/tty/serial/sunzilog.o Cross compiled for ia64 architecture. 10226 549 472 11247 2bef drivers/tty/serial/sn_console.o 10414 365 472 11251 2bf3 drivers/tty/serial/sn_console.o The files drivers/tty/serial/zs.o, drivers/tty/serial/lpc32xx_hs.o and drivers/tty/serial/lantiq.o did not compile. Signed-off-by: Bhumika Goyal Signed-off-by: Greg Kroah-Hartman

serial: use container_of to resolve uart_ip22zilog_port from uart_port

2014-11-06T03:20:52Z

Use container_of instead of casting first structure member. Signed-off-by: Fabian Frederick Signed-off-by: Greg Kroah-Hartman