kernel/drivers/tty/serial/8250, branch linux-6.9.y

serial: 8250_omap: Fix Errata i2310 with RX FIFO level check

2024-07-05T07:38:20Z

commit c128a1b0523b685c8856ddc0ac0e1caef1fdeee5 upstream. Errata i2310[0] says, Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts. Commit 9d141c1e6157 ("serial: 8250_omap: Implementation of Errata i2310") which added the workaround but missed ensuring RX FIFO is really empty before applying the errata workaround as recommended in the errata text. Fix this by adding back check for UART_OMAP_RX_LVL to be 0 for workaround to take effect. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: 9d141c1e6157 ("serial: 8250_omap: Implementation of Errata i2310") Cc: stable@vger.kernel.org Reported-by: Vignesh Raghavendra Closes: https://lore.kernel.org/all/e96d0c55-0b12-4cbf-9d23-48963543de49@ti.com/ Signed-off-by: Udit Kumar Link: https://lore.kernel.org/r/20240625160725.2102194-1-u-kumar1@ti.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Implementation of Errata i2310

2024-07-05T07:38:10Z

commit 9d141c1e615795eeb93cd35501ad144ee997a826 upstream. As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Udit Kumar Link: https://lore.kernel.org/r/20240619105903.165434-1-u-kumar1@ti.com Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: Fix port count mismatch with the device

2024-07-05T07:38:10Z

commit 0ac18dac43103ab1df6d26ec9a781c0126f83ced upstream. Normally, the number of ports is indicated by the third digit of the device ID on Moxa PCI serial boards. For example, `0x1121` indicates a device with 2 ports. However, `CP116E_A_A` and `CP116E_A_B` are exceptions; they have 8 ports, but the third digit of the device ID is `6`. This patch introduces a function to retrieve the number of ports on Moxa PCI serial boards, addressing the issue described above. Fixes: 37058fd5d239 ("tty: serial: 8250: Add support for MOXA Mini PCIe boards") Cc: stable Signed-off-by: Crescent Hsieh Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240617063058.18866-1-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Revert "Move definitions to the shared header"

2024-06-27T11:52:30Z

commit 2c94512055f362dd789e0f87b8566feeddec83c9 upstream. This reverts commit d9666dfb314e1ffd6eb9c3c4243fe3e094c047a7. The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Fix the mistake made in the past by moving the respective definitions to the specific driver. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240514190730.2787071-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: exar: adding missing CTI and Exar PCI ids

2024-06-27T11:52:18Z

[ Upstream commit b86ae40ffcf5a16b9569b1016da4a08c4f352ca2 ] - Added Connect Tech and Exar IDs not already in pci_ids.h Signed-off-by: Parker Newman Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw

2024-06-21T12:40:38Z

[ Upstream commit 87d80bfbd577912462061b1a45c0ed9c7fcb872f ] The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Currently the only cpr_val is required by the common code, make it be available via struct dw8250_port_data. This fixes the UART breakage on Intel Galileo boards. Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240514190730.2787071-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level

2024-06-21T12:40:12Z

commit 5208e7ced520a813b4f4774451fbac4e517e78b2 upstream. The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32 bytes when a TX interrupt occurs. This fixes a problem observed on the PXA168 that dropped a bunch of TX bytes during large transmissions. Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Doug Brown Link: https://lore.kernel.org/r/20240519191929.122202-1-doug@schmorgal.com Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup

2024-05-30T07:43:59Z

commit 4244f830a56058ee0670d80e7ac9fd7c982eb480 upstream. When Rx in-band wakeup is enabled, set RTS to true in mtk8250_shutdown() so the connected device can still send message and trigger IRQ when the system is suspended. Fixes: 18c9d4a3c249 ("serial: When UART is suspended, set RTS to false") Cc: stable Signed-off-by: Pin-yen Lin Link: https://lore.kernel.org/r/20240424130619.2924456-1-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman

serial: 8250_bcm7271: use default_mux_rate if possible

2024-05-30T07:43:59Z

commit 614a19b89ca43449196a8af1afac7d55c6781687 upstream. There is a scenario when resuming from some power saving states with no_console_suspend where console output can be generated before the 8250_bcm7271 driver gets the opportunity to restore the baud_mux_clk frequency. Since the baud_mux_clk is at its default frequency at this time the output can be garbled until the driver gets the opportunity to resume. Since this is only an issue with console use of the serial port during that window and the console isn't likely to use baud rates that require alternate baud_mux_clk frequencies, allow the driver to select the default_mux_rate if it is accurate enough. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Link: https://lore.kernel.org/r/20240424222559.1844045-1-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Remove redundant PCI IDs

2024-04-09T13:57:01Z

Driver complains that PCI IDs are not needed for some of the LAVA cards: [ 0.297252] serial 0000:04:00.0: Redundant entry in serial pci_table. [ 0.297252] Please send the output of lspci -vv, this [ 0.297252] message (0x1407,0x0120,0x0000,0x0000), the [ 0.297252] manufacturer and name of serial board or [ 0.297252] modem board to . Do as suggested. Reported-by: Jimmy A Closes: https://lore.kernel.org/r/VI1P194MB052751BE157EFE9CEAB75725CE362@VI1P194MB0527.EURP194.PROD.OUTLOOK.COM Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240403224152.945099-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman