kernel/drivers/thermal/broadcom, branch linux-5.1.y

thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs

2019-03-18T14:11:06Z

"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by: Phil Elwell Signed-off-by: Zhang Rui

thermal: broadcom: Add Stingray thermal driver

2019-02-06T00:35:57Z

Stingray SoC has six temperature sensor and those are configured, controlled and accessed to read temperature and update in DDR memory using m0 firmware. All six sensors has been given 4 bytes of memory in DDR to write temperature in millivolts. This thermal driver read temperature values from DDR because no direct access to sensors. Like this all temparature sensors are monitored and trips at critical temperature. If driver can't handle thermal runaways because of any unknown reason, then firmware in m0 Processor will handle. Reviewed-by: Ray Jui Reviewed-by: Scott Branden Reviewed-by: Vikram Prakash Reviewed-by: Rob Herring Signed-off-by: Pramod Kumar Signed-off-by: Srinath Mannam Signed-off-by: Eduardo Valentin

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

2019-01-06T00:01:16Z

Pull thermal SoC updates from Eduardo Valentin: - Tegra DT binding documentation for Tegra194 - Armada now supports ap806 and cp110 - RCAR thermal now supports R8A774C0 and R8A77990 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom, Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits) thermal: generic-adc: Fix adc to temp interpolation thermal: rcar_thermal: add R8A77990 support dt-bindings: thermal: rcar-thermal: add R8A77990 support thermal: rcar_thermal: add R8A774C0 support dt-bindings: thermal: rcar-thermal: add R8A774C0 support dt-bindings: cp110: document the thermal interrupt capabilities dt-bindings: ap806: document the thermal interrupt capabilities MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver thermal: armada: add overheat interrupt support thermal: st: fix Makefile typo thermal: uniphier: Convert to SPDX identifier thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro dt-bindings: thermal: tegra-bpmp: Add Tegra194 support thermal: imx: save one condition block for normal case of nvmem initialization thermal: imx: fix for dependency on cpu-freq thermal: tsens: qcom: do not create duplicate regmap debugfs entries thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy() dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts thermal: broadcom: use devm_thermal_zone_of_sensor_register ...

thermal: broadcom: use devm_thermal_zone_of_sensor_register

2019-01-02T12:47:09Z

Using devm_thermal_zone_of_sensor_register allows to simplify some error handling code, drop a label, and drop the remove function. Signed-off-by: Julia Lawall Reviewed-by: Daniel Lezcano Signed-off-by: Eduardo Valentin

thermal: bcm2835: enable hwmon explicitly

2019-01-02T12:47:08Z

By defaul of-based thermal driver do not enable hwmon. This patch does this explicitly, so that the temperature can be read through the common hwmon sysfs. Signed-off-by: Matthias Brugger Acked-by: Stefan Wahren Signed-off-by: Eduardo Valentin

thermal: broadcom: constify thermal_zone_of_device_ops structure

2018-12-05T14:47:46Z

The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Reviewed-by: Daniel Lezcano Signed-off-by: Eduardo Valentin

thermal: bcm2835: Switch to SPDX identifier

2018-12-05T05:35:33Z

Adopt the SPDX license identifier headers to ease license compliance management. Cc: Martin Sperl Signed-off-by: Stefan Wahren Signed-off-by: Eduardo Valentin

thermal: bcm2835: Stop using printk format %pCr

2018-06-05T07:43:38Z

Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by printing the variable that already holds the clock rate. Note that calling clk_get_rate() is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-3-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai To: Jonathan Corbet To: Michael Turquette To: Stephen Boyd To: Zhang Rui To: Eduardo Valentin To: Eric Anholt To: Stefan Wahren To: Greg Kroah-Hartman Cc: Sergey Senozhatsky Cc: Petr Mladek Cc: Linus Torvalds Cc: Steven Rostedt Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Geert Uytterhoeven Acked-by: Stefan Wahren Signed-off-by: Petr Mladek

thermal: add brcmstb AVS TMON driver

2017-11-01T02:32:19Z

The AVS TMON core provides temperature readings, a pair of configurable high- and low-temperature threshold interrupts, and an emergency over-temperature chip reset. The driver utilizes the first two to provide temperature readings and high-temperature notifications to applications. The over-temperature reset is not exposed to applications; this reset threshold is critical to the system and should be set with care within the bootloader. Applications may choose to utilize the notification mechanism, the temperature reading mechanism (e.g., through polling), or both. Signed-off-by: Brian Norris Signed-off-by: Doug Berger Signed-off-by: Markus Mayer Signed-off-by: Eduardo Valentin

thermal: bcm2835: constify thermal_zone_of_device_ops structures

2017-08-11T03:38:30Z

The thermal_zone_of_device_ops structure is only passed as the fourth argument to thermal_zone_of_sensor_register, which is declared as const. Thus the thermal_zone_of_device_ops structure itself can be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Acked-by: Stefan Wahren Signed-off-by: Zhang Rui