kernel/drivers/tee/tee_shm.c, branch linux-rolling-stable

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-10-02T00:32:51Z

Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ...

Merge tag 'tee-shm-register-fix-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers

2025-09-24T21:12:20Z

TEE fix2 for v6.17 Fixing incorrect error handling for a call to iov_iter_extract_pages(). * tag 'tee-shm-register-fix-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee: tee: fix register_shm_helper() Link: https://lore.kernel.org/r/20250924083404.GA3747732@rayden Signed-off-by: Arnd Bergmann

tee: fix register_shm_helper()

2025-09-22T06:47:00Z

In register_shm_helper(), fix incorrect error handling for a call to iov_iter_extract_pages(). A case is missing for when iov_iter_extract_pages() only got some pages and return a number larger than 0, but not the requested amount. This fixes a possible NULL pointer dereference following a bad input from ioctl(TEE_IOC_SHM_REGISTER) where parts of the buffer isn't mapped. Cc: stable@vger.kernel.org Reported-by: Masami Ichikawa Closes: https://lore.kernel.org/op-tee/CACOXgS-Bo2W72Nj1_44c7bntyNYOavnTjJAvUbEiQfq=u9W+-g@mail.gmail.com/ Tested-by: Masami Ichikawa Fixes: 7bdee4157591 ("tee: Use iov_iter to better support shared buffer registration") Signed-off-by: Jens Wiklander

tee: add tee_shm_alloc_dma_mem()

2025-09-11T09:22:33Z

Add tee_shm_alloc_dma_mem() to allocate DMA memory. The memory is represented by a tee_shm object using the new flag TEE_SHM_DMA_MEM to identify it as DMA memory. The allocated memory will later be lent to the TEE to be used as protected memory. Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander

tee: new ioctl to a register tee_shm from a dmabuf file descriptor

2025-09-11T09:22:29Z

Add a userspace API to create a tee_shm object that refers to a dmabuf reference. Userspace registers the dmabuf file descriptor as in a tee_shm object. The registration is completed with a tee_shm returned file descriptor. Userspace is free to close the dmabuf file descriptor after it has been registered since all the resources are now held via the new tee_shm object. Closing the tee_shm file descriptor will eventually release all resources used by the tee_shm object when all references are released. The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to physically contiguous memory buffers. Dmabuf references acquired from the TEE DMA-heap can be used as protected memory for Secure Video Path and such use cases. It depends on the TEE and the TEE driver if dmabuf references acquired by other means can be used. A new tee_shm flag is added to identify tee_shm objects built from a registered dmabuf, TEE_SHM_DMA_BUF. Signed-off-by: Etienne Carriere Signed-off-by: Olivier Masse Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander

tee: fix memory leak in tee_dyn_shm_alloc_helper

2025-08-04T12:28:04Z

When shm_register() fails in tee_dyn_shm_alloc_helper(), the pre-allocated pages array is not freed, resulting in a memory leak. Fixes: cf4441503e20 ("tee: optee: Move pool_op helper functions") Signed-off-by: Pei Xiao Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander

tee: fix NULL pointer dereference in tee_shm_put

2025-08-04T11:25:37Z

tee_shm_put have NULL pointer dereference: __optee_disable_shm_cache --> shm = reg_pair_to_ptr(...);//shm maybe return NULL tee_shm_free(shm); --> tee_shm_put(shm);//crash Add check in tee_shm_put to fix it. panic log: Unable to handle kernel paging request at virtual address 0000000000100cca Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000 [0000000000100cca] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ---- 6.6.0-39-generic #38 Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07 Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0 10/26/2022 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tee_shm_put+0x24/0x188 lr : tee_shm_free+0x14/0x28 sp : ffff001f98f9faf0 x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000 x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048 x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88 x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003 x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101 x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca Call trace: tee_shm_put+0x24/0x188 tee_shm_free+0x14/0x28 __optee_disable_shm_cache+0xa8/0x108 optee_shutdown+0x28/0x38 platform_shutdown+0x28/0x40 device_shutdown+0x144/0x2b0 kernel_power_off+0x3c/0x80 hibernate+0x35c/0x388 state_store+0x64/0x80 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x60 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x270/0x370 ksys_write+0x6c/0x100 __arm64_sys_write+0x20/0x30 invoke_syscall+0x4c/0x120 el0_svc_common.constprop.0+0x44/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x24/0x88 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x14c/0x15 Fixes: dfd0743f1d9e ("tee: handle lookup of shm with reference count 0") Signed-off-by: Pei Xiao Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander

tee: optee: Move pool_op helper functions

2024-04-03T11:58:20Z

Move the pool alloc and free helper functions from the OP-TEE driver to the TEE subsystem, since these could be reused in other TEE drivers. This patch is not supposed to change behavior, it's only reorganizing the code. Reviewed-by: Sumit Garg Suggested-by: Jens Wiklander Signed-off-by: Balint Dobszay Signed-off-by: Jens Wiklander

tee: Refactor TEE subsystem header files

2024-04-03T07:19:31Z

Since commit 25559c22cef8 ("tee: add kernel internal client interface"), it has been a common include/linux/tee_drv.h header file which is shared to hold TEE subsystem internal bits along with the APIs exposed to the TEE client drivers. However, this practice is prone to TEE subsystem internal APIs abuse and especially so with the new TEE implementation drivers being added to reuse existing functionality. In order to address this split TEE subsystem internal bits as a separate header file: include/linux/tee_core.h which should be the one used by TEE implementation drivers. With that include/linux/tee_drv.h lists only APIs exposed by TEE subsystem to the TEE client drivers. Signed-off-by: Sumit Garg Signed-off-by: Balint Dobszay Signed-off-by: Jens Wiklander

tee: Use iov_iter to better support shared buffer registration

2023-12-13T06:23:22Z

Currently it's not possible to register kernel buffers with TEE which are allocated via vmalloc. Use iov_iter and associated helper functions to manage the page registration for all type of memories. Suggested-by: Christoph Hellwig Signed-off-by: Arnaud Pouliquen Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander