kernel/drivers/tee/optee/core.c, branch linux-5.1.y

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-03-06T17:41:12Z

Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...

tee: optee: add missing of_node_put after of_device_is_available

2019-02-28T09:23:04Z

Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall Signed-off-by: Jens Wiklander

tee: optee: add TEE bus device enumeration support

2019-02-01T14:12:46Z

OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ services for TEE bus. So implement device enumeration using invoke function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of device UUIDs. Also register these enumerated devices with TEE bus as "optee-clntX" device. Signed-off-by: Sumit Garg Reviewed-by: Daniel Thompson [jw: fix optee_enumerate_devices() with no devices found] Signed-off-by: Jens Wiklander

tee: optee: log message if dynamic shm is enabled

2018-12-11T13:38:40Z

When dynamic shared memory support is enabled in the OP-TEE Trusted OS, it doesn't mean that the driver supports it, which can confuse users during debugging. Log a message when dynamic shared memory is enabled in the driver, to let users know for sure. Suggested-by: Jerome Forissier Signed-off-by: Victor Chong Reviewed-by: Jerome Forissier Signed-off-by: Jens Wiklander

Merge tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers

2018-08-26T23:27:32Z

Misc enhancement for tee driver subsystem * Adds a kernel internal tee client interface allowing other drivers etc to access a TEE * OP-TEE driver takes DT status property into account * tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: add kernel internal client interface tee: optee: take DT status property into account Signed-off-by: Olof Johansson

tee: optee: take DT status property into account

2018-08-24T09:55:18Z

DT nodes may have a 'status' property which, if set to anything other than 'ok' or 'okay', indicates to the OS that the DT node should be treated as if it was not present. So add that missing logic to the OP-TEE driver. Signed-off-by: Ard Biesheuvel Signed-off-by: Jens Wiklander

tee: optee: making OPTEE_SHM_NUM_PRIV_PAGES configurable via Kconfig

2018-06-20T09:20:36Z

This change adds KCONFIG option to set number of pages out of whole shared memory to be used for OP-TEE driver private data structures. Signed-off-by: Sahil Malhotra [jw: fixing trivial merge conflict] Signed-off-by: Jens Wiklander

tee: optee: report OP-TEE revision information

2018-03-06T10:03:55Z

When the driver initializes, report the following information about the OP-TEE OS: - major and minor version, - build identifier (if available). Signed-off-by: Jerome Forissier Reviewed-by: Matthias Brugger Signed-off-by: Jens Wiklander

Merge tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers

2017-12-21T16:23:52Z

Pull "tee dynamic shm for v4.16" from Jens Wiklander: This pull request enables dynamic shared memory support in the TEE subsystem as a whole and in OP-TEE in particular. Global Platform TEE specification [1] allows client applications to register part of own memory as a shared buffer between application and TEE. This allows fast zero-copy communication between TEE and REE. But current implementation of TEE in Linux does not support this feature. Also, current implementation of OP-TEE transport uses fixed size pre-shared buffer for all communications with OP-TEE OS. This is okay in the most use cases. But this prevents use of OP-TEE in virtualized environments, because: a) We can't share the same buffer between different virtual machines b) Physically contiguous memory as seen by VM can be non-contiguous in reality (and as seen by OP-TEE OS) due to second stage of MMU translation. c) Size of this pre-shared buffer is limited. So, first part of this pull request adds generic register/unregister interface to tee subsystem. The second part adds necessary features into OP-TEE driver, so it can use not only static pre-shared buffer, but whole RAM to communicate with OP-TEE OS. This change is backwards compatible allowing older secure world or user space to work with newer kernels and vice versa. [1] https://www.globalplatform.org/specificationsdevice.asp * tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: shm: inline tee_shm_get_id() tee: use reference counting for tee_context tee: optee: enable dynamic SHM support tee: optee: add optee-specific shared pool implementation tee: optee: store OP-TEE capabilities in private data tee: optee: add registered buffers handling into RPC calls tee: optee: add registered shared parameters handling tee: optee: add shared buffer registration functions tee: optee: add page list manipulation functions tee: optee: Update protocol definitions tee: shm: add page accessor functions tee: shm: add accessors for buffer size and page offset tee: add register user memory tee: flexible shared memory pool creation

Merge tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers

2017-12-21T15:02:07Z

Pull "Enable async communication with tee supplicant" from Jens Wiklander: This pull request enables asynchronous communication with TEE supplicant by introducing meta parameters in the user space API. The meta parameters can be used to tag requests with an id that can be matched against an asynchronous response as is done here in the OP-TEE driver. Asynchronous supplicant communication is needed by OP-TEE to implement GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification is available at https://www.globalplatform.org/specificationsdevice.asp. This change is backwards compatible allowing older supplicants to work with newer kernels and vice versa. * tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: support asynchronous supplicant requests tee: add TEE_IOCTL_PARAM_ATTR_META tee: add tee_param_is_memref() for driver use