kernel/drivers/target, branch linux-5.1.y

scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported

2019-07-26T07:12:21Z

[ Upstream commit 5dd6c49339126c2c8df2179041373222362d6e49 ] If the CHAP_A value is not supported, the chap_server_open() function should free the auth_protocol pointer and set it to NULL, or we will leave a dangling pointer around. [ 66.010905] Unsupported CHAP_A value [ 66.011660] Security negotiation failed. [ 66.012443] iSCSI Login negotiation failed. [ 68.413924] general protection fault: 0000 [#1] SMP PTI [ 68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1 [ 68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210 Signed-off-by: Maurizio Lombardi Reviewed-by: Chris Leech Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target/iblock: Fix overrun in WRITE SAME emulation

2019-07-10T07:52:32Z

commit 5676234f20fef02f6ca9bd66c63a8860fce62645 upstream. WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: Signed-off-by: Roman Bolshakov Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-03-16T19:51:50Z

Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-03-10T00:53:47Z

Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...

scsi: target: tcmu: Switch to bitmap_zalloc()

2019-03-07T00:26:46Z

Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko Reviewed-by: Bart Van Assche Acked-by: Mike Christie Signed-off-by: Martin K. Petersen

scsi: target: tcmu: wait for nl reply only if there are listeners or during an add

2019-03-07T00:26:13Z

genlmsg_multicast_allns now returns the correct statuses when a message is sent to a listener. However in the case of adding a device we want to wait for the listener otherwise we may miss the the device during startup. Signed-off-by: Cathy Avery Acked-by: Mike Christie Signed-off-by: Martin K. Petersen

scsi: remove bidirectional command support

2019-02-06T02:29:21Z

No real need for bidi support once the OSD code is gone. Signed-off-by: Christoph Hellwig Reviewed-by: Jens Axboe Signed-off-by: Martin K. Petersen

scsi: target: make the pi_prot_format ConfigFS path readable

2019-02-05T02:40:32Z

pi_prot_format conversion to write-only caused userspace breakage. Make the ConfigFS path readable again and hardcode the "0\n" content, matching previous output. Fixes: 6baca7601bde ("scsi: target: drop unused pi_prot_format attribute storage") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1667505 Reported-by: Lee Duncan Reported-by: Laura Abbott Reviewed-by: Bart Van Assche Signed-off-by: David Disseldorp Signed-off-by: Martin K. Petersen

scsi: target/iscsi: Simplify iscsit_handle_text_cmd()

2019-02-05T02:37:50Z

Treat text_in and padding as a single buffer instead of two buffers. Cc: Nicholas Bellinger Cc: Mike Christie Cc: Christoph Hellwig Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: target/iscsi: Simplify iscsit_dump_data_payload()

2019-02-05T02:36:54Z

Use a single loop to dump immediate data, padding and digest instead of using separate rx_data() calls for each type of data. Cc: Nicholas Bellinger Cc: Mike Christie Cc: Christoph Hellwig Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen