kernel/drivers/soc, branch linux-4.2.y

soc/tegra: pmc: Avoid usage of uninitialized variable

2015-09-21T17:10:57Z

commit 95169cd23bfa88003f8be06234dbd65f5737add0 upstream. Make sure to only drop the reference to the OF node after it's been successfully obtained. Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC") Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-07-02T21:40:49Z

Pull ARM SoC late fixes and dependencies from Kevin Hilman: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. Other than the fixes, the primary feature being added is the conversion of some OMAP drivers to the new generic wakeirq interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: Enable BRCMNAND driver ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNAND ARM: at91/dt: update udc compatible strings ARM: at91/dt: trivial: fix USB udc compatible string arm64: dts: Add APM X-Gene standby GPIO controller DTS entries soc: qcom: spm: Fix idle on THUMB2 kernels ARM: dove: fix legacy dove IRQ numbers ARM: mvebu: fix suspend to RAM on big-endian configurations ARM: mvebu: adjust Armada XP DT spi muxing after pinctrl function rename serial: 8250_omap: Move wake-up interrupt to generic wakeirq serial: omap: Switch wake-up interrupt to generic wakeirq mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq

Merge tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2015-07-02T17:42:13Z

Pull module_platform_driver replacement from Paul Gortmaker: "Replace module_platform_driver with builtin_platform driver in non modules. We see an increasing number of non-modular drivers using modular_driver() type register functions. There are several downsides to letting this continue unchecked: - The code can appear modular to a reader of the code, and they won't know if the code really is modular without checking the Makefile and Kconfig to see if compilation is governed by a bool or tristate. - Coders of drivers may be tempted to code up an __exit function that is never used, just in order to satisfy the required three args of the modular registration function. - Non-modular code ends up including the which increases CPP overhead that they don't need. - It hinders us from performing better separation of the module init code and the generic init code. So here we introduce similar macros for builtin drivers. Then we convert builtin drivers (controlled by a bool Kconfig) by making the following type of mapping: module_platform_driver() ---> builtin_platform_driver() module_platform_driver_probe() ---> builtin_platform_driver_probe(). The set of drivers that are converted here are just the ones that showed up as relying on an implicit include of during a pending header cleanup. So we convert them here vs adding an include of to non-modular code to avoid compile fails. Additonal conversions can be done asynchronously at any time. Once again, an unused module_exit function that is removed here appears in the diffstat as an outlier wrt all the other changes" * tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver drivers/power: Convert non-modular syscon-reboot to use builtin_platform_driver drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver drivers/cpufreq: Convert non-modular s5pv210-cpufreq.c to use builtin_platform_driver drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver drivers/platform: Convert non-modular pdev_bus to use builtin_platform_driver platform_device: better support builtin boilerplate avoidance

soc: qcom: spm: Fix idle on THUMB2 kernels

2015-07-01T19:16:30Z

The ifc6410 firmware always enters the kernel in ARM state from deep idle. Use the cpu_resume_arm() wrapper instead of cpu_resume() to property switch into the THUMB2 state when we wake up from idle. This fixes a problem reported by Kevin Hilman on next-20150601 where the ifc6410 fails to boot a THUMB2 kernel because the platform's firmware always enters the kernel in ARM mode from deep idle states. Reported-by: Kevin Hilman Cc: Ard Biesheuvel Cc: Lina Iyer Signed-off-by: Stephen Boyd Signed-off-by: Kevin Hilman

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-06-26T18:54:29Z

Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-06-26T18:34:35Z

Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...

Merge tag 'armsoc-drivers' into test-merge

2015-06-25T04:32:26Z

ARM: SoC: driver updates for v4.2 Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses Conflicts: arch/arm64/boot/dts/arm/juno-motherboard.dtsi Trivial add/add conflict with our dt branch. Resolution: take both sides. # gpg: Signature made Wed Jun 24 21:32:17 2015 PDT using RSA key ID D3FBC665 # gpg: Good signature from "Kevin Hilman " # gpg: aka "Kevin Hilman " # gpg: aka "Kevin Hilman " # Conflicts: # arch/arm64/boot/dts/arm/juno-motherboard.dtsi

Merge tag 'armsoc-soc' into test-merge

2015-06-25T04:32:13Z

ARM: SoC: platform support for v4.2 Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC Conflicts: arch/arm/mach-socfpga/core.h Trivial remove/remove conflict with our cleanup branch. Resolution: remove both sides # gpg: Signature made Wed Jun 24 21:32:12 2015 PDT using RSA key ID D3FBC665 # gpg: Good signature from "Kevin Hilman " # gpg: aka "Kevin Hilman " # gpg: aka "Kevin Hilman " # Conflicts: # arch/arm/mach-socfpga/core.h

drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver

2015-06-16T18:12:38Z

This file depends on Kconfig SOC_REALVIEW which is a bool, so we use the appropriate registration function, which avoids us relying on an implicit inclusion of which we are doing currently. While this currently works, we really don't want to be including the module.h header in non-modular code, which we'd be forced to do, pending some upcoming code relocation from init.h into module.h. So we fix it now by using the non-modular equivalent. Cc: Arnd Bergmann Cc: Linus Walleij Acked-by: Linus Walleij Cc: Axel Lin Signed-off-by: Paul Gortmaker

drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver

2015-06-16T18:12:38Z

This file depends on Kconfig ARCH_TEGRA which is a bool, so we use the appropriate registration function, which avoids us relying on an implicit inclusion of which we are doing currently. While this currently works, we really don't want to be including the module.h header in non-modular code, which we'd be forced to do, pending some upcoming code relocation from init.h into module.h. So we fix it now by using the non-modular equivalent. Cc: Stephen Warren Cc: Thierry Reding Cc: Alexandre Courbot Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker