kernel/drivers/scsi/ses.c, branch linux-rolling-lts

scsi: ses: Fix devices attaching to different hosts

2026-03-19T15:08:10Z

[ Upstream commit 70ca8caa96ce473647054f5c7b9dab5423902402 ] On a multipath SAS system some devices don't end up with correct symlinks from the SCSI device to its enclosure. Some devices even have enclosure links pointing to enclosures attached to different SCSI hosts. ses_match_to_enclosure() calls enclosure_for_each_device() which iterates over all enclosures on the system, not just enclosures attached to the current SCSI host. Replace the iteration with a direct call to ses_enclosure_find_by_addr(). Reviewed-by: David Jeffery Signed-off-by: Tomas Henzl Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23Z

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

scsi: ses: Drop driver owner initialization

2024-04-06T00:58:25Z

Core in scsi_register_driver() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240328-b4-module-owner-scsi-v1-3-c86cb4f6e91c@linaro.org Signed-off-by: Martin K. Petersen

scsi: ses: Have midlayer retry scsi_execute_cmd() errors

2024-01-30T02:20:54Z

This has ses have the SCSI midlayer retry scsi_execute_cmd() errors instead of driving them itself. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20240123002220.129141-17-michael.christie@oracle.com Acked-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

scsi: ses: Handle enclosure with just a primary component gracefully

2023-04-12T01:11:39Z

This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") and introduces proper handling of case where there are no detected secondary components, but primary component (enumerated in num_enclosures) does exist. That fix was originally proposed by Ding Hui . Completely ignoring devices that have one primary enclosure and no secondary one results in ses_intf_add() bailing completely scsi 2:0:0:254: enclosure has no enumerated components scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations such even on valid configurations with 1 primary and 0 secondary enclosures as below: # sg_ses /dev/sg0 3PARdata SES 3321 Supported diagnostic pages: Supported Diagnostic Pages [sdp] [0x0] Configuration (SES) [cf] [0x1] Short Enclosure Status (SES) [ses] [0x8] # sg_ses -p cf /dev/sg0 3PARdata SES 3321 Configuration diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 enclosure descriptor list Subenclosure identifier: 0 [primary] relative ES process id: 0, number of ES processes: 1 number of type descriptor headers: 1 enclosure logical identifier (hex): 20000002ac02068d enclosure vendor: 3PARdata product: VV rev: 3321 type descriptor header and text list Element type: Unspecified, subenclosure id: 0 number of possible elements: 1 The changelog for the original fix follows ===== We can get a crash when disconnecting the iSCSI session, the call trace like this: [ffff00002a00fb70] kfree at ffff00000830e224 [ffff00002a00fba0] ses_intf_remove at ffff000001f200e4 [ffff00002a00fbd0] device_del at ffff0000086b6a98 [ffff00002a00fc50] device_unregister at ffff0000086b6d58 [ffff00002a00fc70] __scsi_remove_device at ffff00000870608c [ffff00002a00fca0] scsi_remove_device at ffff000008706134 [ffff00002a00fcc0] __scsi_remove_target at ffff0000087062e4 [ffff00002a00fd10] scsi_remove_target at ffff0000087064c0 [ffff00002a00fd70] __iscsi_unbind_session at ffff000001c872c4 [ffff00002a00fdb0] process_one_work at ffff00000810f35c [ffff00002a00fe00] worker_thread at ffff00000810f648 [ffff00002a00fe70] kthread at ffff000008116e98 In ses_intf_add, components count could be 0, and kcalloc 0 size scomp, but not saved in edev->component[i].scratch In this situation, edev->component[0].scratch is an invalid pointer, when kfree it in ses_intf_remove_enclosure, a crash like above would happen The call trace also could be other random cases when kfree cannot catch the invalid pointer We should not use edev->component[] array when the components count is 0 We also need check index when use edev->component[] array in ses_enclosure_data_process ===== Reported-by: Michal Kolar Originally-by: Ding Hui Cc: stable@vger.kernel.org Fixes: 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components") Signed-off-by: Jiri Kosina Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2304042122270.29760@cbobk.fhfr.pm Tested-by: Michal Kolar Signed-off-by: Martin K. Petersen

driver core: class: remove struct class_interface * from callbacks

2023-04-03T19:42:52Z

The add_dev and remove_dev callbacks in struct class_interface currently pass in a pointer back to the class_interface structure that is calling them, but none of the callback implementations actually use this pointer as it is pointless (the structure is known, the driver passed it in in the first place if it is really needed again.) So clean this up and just remove the pointer from the callbacks and fix up all callback functions. Cc: Jean Delvare Cc: Guenter Roeck Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: Kurt Schwemmer Cc: Jon Mason Cc: Dave Jiang Cc: Allen Hubbe Cc: Dominik Brodowski Cc: Matt Porter Cc: Alexandre Bounine Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Doug Gilbert Cc: John Stultz Cc: Thomas Gleixner Cc: Stephen Boyd Cc: Hans de Goede Cc: Andrew Morton Cc: Wang Weiyang Cc: Yang Yingliang Cc: Jakob Koschel Cc: Cai Xinchen Acked-by: Rafael J. Wysocki Acked-by: Logan Gunthorpe Link: https://lore.kernel.org/r/2023040250-pushover-platter-509c@gregkh Signed-off-by: Greg Kroah-Hartman

scsi: ses: Don't attach if enclosure has no components

2023-02-21T22:44:06Z

An enclosure with no components can't usefully be operated by the driver (since effectively it has nothing to manage), so report the problem and don't attach. Not attaching also fixes an oops which could occur if the driver tries to manage a zero component enclosure. [mkp: Switched to KERN_WARNING since this scenario is common] Link: https://lore.kernel.org/r/c5deac044ac409e32d9ad9968ce0dcbc996bfc7a.camel@linux.ibm.com Cc: stable@vger.kernel.org Reported-by: Ding Hui Signed-off-by: James Bottomley Signed-off-by: Martin K. Petersen

scsi: ses: Fix slab-out-of-bounds in ses_intf_remove()

2023-02-21T22:32:04Z

A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong. Link: https://lore.kernel.org/r/20230202162451.15346-5-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl Signed-off-by: Martin K. Petersen

scsi: ses: Fix possible desc_ptr out-of-bounds accesses

2023-02-21T22:32:04Z

Sanitize possible desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). Link: https://lore.kernel.org/r/20230202162451.15346-4-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl Signed-off-by: Martin K. Petersen