kernel/drivers/scsi/mpt3sas, branch linux-rolling-stable

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2025-10-04T02:17:48Z

Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus assorted cleanups and fixes. The only core update is to sd.c and is mostly cosmetic" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits) scsi: MAINTAINERS: Update FC element owners scsi: mpt3sas: Update driver version to 54.100.00.00 scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate scsi: ufs: dt-bindings: Document gear and rate limit properties scsi: ufs: core: Fix data race in CPU latency PM QoS request handling scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() scsi: storvsc: Remove redundant ternary operators scsi: ufs: core: Change MCQ interrupt enable flow scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() scsi: lpfc: Copyright updates for 14.4.0.11 patches scsi: lpfc: Update lpfc version to 14.4.0.11 scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int scsi: lpfc: Clean up extraneous phba dentries ...

scsi: mpt3sas: Update driver version to 54.100.00.00

2025-09-25T02:34:43Z

Updated driver version to 54.100.00.00. Signed-off-by: Ranjan Kumar Message-Id: <20250922095113.281484-5-ranjan.kumar@broadcom.com> Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate

2025-09-25T02:34:43Z

Add handling for MPI26_SAS_NEG_LINK_RATE_22_5 in _transport_convert_phy_link_rate(). This maps the new 22.5 Gbps negotiated rate to SAS_LINK_RATE_22_5_GBPS, to get correct PHY link speeds. Signed-off-by: Ranjan Kumar Message-Id: <20250922095113.281484-4-ranjan.kumar@broadcom.com> Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE

2025-09-25T02:34:42Z

Avoid unconditional IOCLogInfo prints for CONFIG_INVALID_PAGE. Log only if MPT_DEBUG_REPLY is enabled or when loginfo represents other errors. This reduces uncessary logging without losing useful error reporting. Signed-off-by: Ranjan Kumar Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()

2025-09-25T02:34:42Z

During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Ranjan Kumar Signed-off-by: Martin K. Petersen

scsi: switch ->bios_param() to passing gendisk

2025-08-13T06:59:28Z

Instances are passed struct block_device *bdev argument; the only thing it is used for (if it's used in the first place) is bdev->bd_disk. Might as well pass that in the first place... Reviewed-by: Martin K. Petersen Reviewed-by: Christoph Hellwig Acked-by: Jens Axboe Signed-off-by: Al Viro

scsi: mpt3sas: Fix a fw_event memory leak

2025-07-25T01:06:38Z

In _mpt3sas_fw_work() the fw_event reference is removed, it should also be freed in all cases. Fixes: 4318c7347847 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.") Signed-off-by: Tomas Henzl Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Correctly handle ATA device errors

2025-06-20T03:00:03Z

With the ATA error model, an NCQ command failure always triggers an abort (termination) of all NCQ commands queued on the device. In such case, the SAT or the host must handle the failed command according to the command sense data and immediately retry all other NCQ commands that were aborted due to the failed NCQ command. For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not handled by the HBA SAT and sent back to the host, with an ioc log information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function _scsih_io_done() always forces a retry of commands terminated with the status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result DID_SOFT_ERROR, regardless of the log_info for the command. This correctly forces the retry of collateral NCQ abort commands, but with the retry counter for the command being incremented. If a command to an ATA device is subject to too many retries due to other NCQ commands failing (e.g. read commands trying to access unreadable sectors), the collateral NCQ abort commands may be terminated with an error as they run out of retries. This violates the SAT specification and causes hard-to-debug command errors. Solve this issue by modifying the handling of the MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an ATA device and if the command loginfo indicates an NCQ collateral abort. If that is the case, force the command retry using the SCSI result DID_IMM_RETRY to avoid incrementing the command retry count. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org Tested-by: Yafang Shao Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Drop unused variable in mpt3sas_send_mctp_passthru_req()

2025-06-16T18:23:50Z

With W=1, gcc complains correctly: mpt3sas_ctl.c: In function ‘mpt3sas_send_mctp_passthru_req’: mpt3sas_ctl.c:2917:29: error: variable ‘mpi_reply’ set but not used [-Werror=unused-but-set-variable] 2917 | MPI2DefaultReply_t *mpi_reply; | ^~~~~~~~~ Drop the unused assignment and variable. Signed-off-by: André Draszik Link: https://lore.kernel.org/r/20250606-mpt3sas-v1-1-906ffe49fb6b@linaro.org Signed-off-by: Martin K. Petersen

scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer

2025-05-21T02:03:15Z

Fix _ctl_get_mpt_mctp_passthru_adapter() to return the correct IOC pointer to caller based on dev_index. Signed-off-by: Shivasharan S Link: https://lore.kernel.org/r/1747213781-31545-1-git-send-email-shivasharan.srikanteshwara@broadcom.com Fixes: c72be4b5bb7c ("scsi: mpt3sas: Add support for MCTP Passthrough commands") Signed-off-by: Martin K. Petersen