kernel/drivers/scsi/mac_scsi.c, branch linux-rolling-lts

scsi: Switch back to struct platform_driver::remove()

2024-11-07T01:45:25Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/scsi to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. On the way do a few whitespace changes to make indention consistent. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20241028080754.429191-2-u.kleine-koenig@baylibre.com Signed-off-by: Martin K. Petersen

scsi: mac_scsi: Enable scatter/gather by default

2024-08-13T02:05:49Z

Now that FLAG_DMA_FIXUP has itself been fixed up, it can be used to enable scatter/gather. Increase the default value for sg_tablesize to SG_ALL for those systems which are compatible with FLAG_DMA_FIXUP. Tested-by: Stan Johnson Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/f155ba5ce93055cbc6ac6d4026673f40f826edb8.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen

scsi: mac_scsi: Disallow bus errors during PDMA send

2024-08-13T02:05:49Z

SD cards can produce write latency spikes on the order of a hundred milliseconds. If the target firmware does not hide that latency during DATA IN and OUT phases it can cause the PDMA circuitry to raise a processor bus fault which in turn leads to an unreliable byte count and a DMA overrun. The Last Byte Sent flag is used to detect the overrun but this mechanism is unreliable on some systems. Instead, set a DID_ERROR result whenever there is a bus fault during a PDMA send, unless the cause was a phase mismatch. Cc: stable@vger.kernel.org # 5.15+ Reported-and-tested-by: Stan Johnson Fixes: 7c1f3e3447a1 ("scsi: mac_scsi: Treat Last Byte Sent time-out as failure") Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/cc38df687ace2c4ffc375a683b2502fc476b600d.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen

scsi: mac_scsi: Refactor polling loop

2024-08-13T02:05:48Z

Before the error handling can be revised, some preparation is needed. Refactor the polling loop with a new function, macscsi_wait_for_drq(). This function will gain more call sites in the next patch. Cc: stable@vger.kernel.org # 5.15+ Tested-by: Stan Johnson Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/6a5ffabb4290c0d138c6d285fda8fa3902e926f0.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen

scsi: mac_scsi: Revise printk(KERN_DEBUG ...) messages

2024-08-13T02:05:48Z

After a bus fault, capture and log the chip registers immediately, if the NDEBUG_PSEUDO_DMA macro is defined. Remove some printk(KERN_DEBUG ...) messages that aren't needed any more. Don't skip the debug message when bytes == 0. Show all of the byte counters in the debug messages. Cc: stable@vger.kernel.org # 5.15+ Tested-by: Stan Johnson Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/7573c79f4e488fc00af2b8a191e257ca945e0409.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen

scsi: Add missing MODULE_DESCRIPTION() macros

2024-06-12T01:33:58Z

On x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/scsi_common.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/advansys.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/BusLogic.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/aha1740.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/isci/isci.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/elx/efct.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/atp870u.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/ppa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/imm.o Add all missing invocations of the MODULE_DESCRIPTION() macro. This updates all files which have a MODULE_LICENSE() but which do not have a MODULE_DESCRIPTION(), even ones which did not produce the x86 allmodconfig warnings. Acked-by: Finn Thain Signed-off-by: Jeff Johnson Link: https://lore.kernel.org/r/20240610-md-drivers-scsi-v3-1-055da78d66b2@quicinc.com Signed-off-by: Martin K. Petersen

scsi: mac_scsi: Mark driver struct with __refdata to prevent section mismatch

2024-04-06T01:11:44Z

As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent the following section mismatch warning WARNING: modpost: drivers/scsi/mac_scsi: section mismatch in reference: mac_scsi_driver+0x8 (section: .data) -> mac_scsi_remove (section: .exit.text) that triggers on an allmodconfig W=1 build. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/e41d10906948a980e985f6065485445d9bbbd2f7.1711746359.git.u.kleine-koenig@pengutronix.de Signed-off-by: Martin K. Petersen

scsi: mac: Convert to platform remove callback returning void

2023-12-06T02:51:37Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/89ce161dad52d99df07135531512ccecb7f25d14.1701619134.git.u.kleine-koenig@pengutronix.de Signed-off-by: Martin K. Petersen

scsi: NCR5380: Add SCp members to struct NCR5380_cmd

2022-02-23T02:11:03Z

This is necessary for the eventual removal of SCp from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-9-bvanassche@acm.org Cc: Michael Schmitz Cc: Ondrej Zary Suggested-by: Bart Van Assche Signed-off-by: Finn Thain Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: NCR5380: Remove the NCR5380_CMD_SIZE macro

2022-02-23T02:11:03Z

This makes it easier to find users of the NCR5380_cmd data structure with 'grep'. Link: https://lore.kernel.org/r/20220218195117.25689-8-bvanassche@acm.org Cc: Finn Thain Cc: Hannes Reinecke Cc: Ondrej Zary Cc: Michael Schmitz Reviewed-by: Johannes Thumshirn Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Acked-by: Finn Thain Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen