kernel/drivers/scsi/lpfc/lpfc_init.c, branch linux-rolling-stable

scsi: lpfc: Properly set WC for DPP mapping

2026-03-12T11:09:08Z

[ Upstream commit bffda93a51b40afd67c11bf558dc5aae83ca0943 ] Using set_memory_wc() to enable write-combining for the DPP portion of the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM only, not MMIO mappings. In fact, as used currently triggers a BUG_ON() with enabled CONFIG_DEBUG_VIRTUAL. Simply map the DPP region separately and in addition to the already existing mappings, avoiding any possible negative side effects for these. Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4") Signed-off-by: Mathias Krause Signed-off-by: Justin Tee Reviewed-by: Mathias Krause Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2025-12-06T03:56:50Z

Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted cleanups and fixes including the WQ_PERCPU series. The biggest core change is the new allocation of pseudo-devices which allow the sending of internal commands to a given SCSI target" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits) scsi: MAINTAINERS: Add the UFS include directory scsi: scsi_debug: Support injecting unaligned write errors scsi: qla2xxx: Fix improper freeing of purex item scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify scsi: ufs: core: Use scsi_device_busy() scsi: ufs: core: Fix single doorbell mode support scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users scsi: target: Add WQ_PERCPU to alloc_workqueue() users scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users() scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq ...

treewide: Drop pci_save_state() after pci_restore_state()

2025-11-24T22:58:59Z

In 2009, commit c82f63e411f1 ("PCI: check saved state before restore") changed the behavior of pci_restore_state() such that it became necessary to call pci_save_state() afterwards, lest recovery from subsequent PCI errors fails. The commit has just been reverted and so all the pci_save_state() after pci_restore_state() calls that have accumulated in the tree are now superfluous. Drop them. Two drivers chose a different approach to achieve the same result: drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the pci_dev's "state_saved" flag to true before calling pci_restore_state(). Drop this as well. Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Acked-by: Dave Jiang Acked-by: Giovanni Cabiddu # qat Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de

Merge patch series "replace old wq(s), added WQ_PERCPU to alloc_workqueue"

2025-11-13T02:30:23Z

Marco Crivellari says: Hi, === Current situation: problems === Let's consider a nohz_full system with isolated CPUs: wq_unbound_cpumask is set to the housekeeping CPUs, for !WQ_UNBOUND the local CPU is selected. This leads to different scenarios if a work item is scheduled on an isolated CPU where "delay" value is 0 or greater then 0: schedule_delayed_work(, 0); This will be handled by __queue_work() that will queue the work item on the current local (isolated) CPU, while: schedule_delayed_work(, 1); Will move the timer on an housekeeping CPU, and schedule the work there. Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed without refactoring the API. === Recent changes to the WQ API === The following, address the recent changes in the Workqueue API: - commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") - commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") The old workqueues will be removed in a future release cycle. === Introduced Changes by this series === 1) [P 1] Replace uses of system_wq and system_unbound_wq system_unbound_wq is to be used when locality is not required. Because of that, system_unbound_wq has been replaced with system_dfl_wq, to make clear it should be used when locality is not required. 2) [P 2-3-4] WQ_PERCPU added to alloc_workqueue() This change adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified. Thanks! Link: https://patch.msgid.link/20251031095643.74246-1-marco.crivellari@suse.com Signed-off-by: Martin K. Petersen

scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users

2025-11-13T02:28:26Z

Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This change adds a new WQ_PERCPU flag to explicitly request alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified. This patch continues the effort to refactor worqueue APIs, which has begun with the change introducing new workqueues and a new alloc_workqueue flag: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Reviewed-by: Justin Tee Link: https://patch.msgid.link/20251104110808.123424-1-marco.crivellari@suse.com Signed-off-by: Martin K. Petersen

scsi: lpfc: Modify kref handling for Fabric Controller ndlps

2025-11-08T18:18:00Z

Currently, there is a kref put in the lpfc_cleanup() routine that takes care of outstanding references on fabric controller ndlps in UNUSED state. While typically there is a state change from UNUSED -> REGLOGIN when the ndlp successfully logs into the fabric, there may be cases when FLOGI is unsuccessful and the ndlp will remain in UNUSED state without a registered rpi, yet the ndlp incorrectly has a kref count of one. To address this, handling of Fabric Controller ndlps are moved into the routines: lpfc_issue_els_scr(), lpfc_issue_els_rdf(), lpfc_cmpl_els_disc_cmd(). In both lpfc_issue_els_scr() and lpfc_issue_els_rdf(), if there does not exist a previously created fabric controller ndlp, an ndlp will be created. Otherwise, we can reuse the pre-existing ndlp object. In lpfc_cmpl_els_disc_cmd(), if the SCR or RDF are not successfully issued, the initial reference on the ndlp that is not registered with upper layers will be decremented with a kref_put(). Signed-off-by: Justin Tee Link: https://patch.msgid.link/20251106224639.139176-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen

scsi: lpfc: Update various NPIV diagnostic log messaging

2025-11-08T18:17:59Z

Update PRLI status log message to automatically warn when CQE status is non-zero. When issuing an RSCN, log ndlp's kref count to the debugfs trace buffer. Add the NPIV virtual port index to the FDMI registration log message with the fabric. Signed-off-by: Justin Tee Link: https://patch.msgid.link/20251106224639.139176-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen

Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-10-06T17:41:03Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that take config space accessor functions. Implement pci_find_capability(), pci_find_ext_capability(), and dwc, dwc endpoint, and cadence capability search interfaces with them (Hans Zhang) - Leave parent unit address 0 in 'interrupt-map' so that when we build devicetree nodes to describe PCI functions that contain multiple peripherals, we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) - Add sysfs 'serial_number' file to expose the Device Serial Number (Matthew Wood) - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das) Resource management: - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Clean up bridge window sizing and assignment (Ilpo Järvinen), including: - Leave non-claimed bridge windows disabled - Enable bridges even if a window wasn't assigned because not all windows are required by downstream devices - Preserve bridge window type when releasing the resource, since the type is needed for reassignment - Consolidate selection of bridge windows into two new interfaces, pbus_select_window() and pbus_select_window_for_type(), so this is done consistently - Compute bridge window start and end earlier to avoid logging stale information MSI: - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) Error handling: - Align AER with EEH by allowing drivers to request a Bus Reset on Non-Fatal Errors (in addition to the reset on Fatal Errors that we already do) (Lukas Wunner) - If error recovery fails, emit FAILED_RECOVERY uevents for the devices, not for the bridge leading to them. This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner) - Align AER with EEH by calling err_handler.error_detected() callbacks to notify drivers if error recovery fails (Lukas Wunner) - Align AER with EEH by restoring device error_state to pci_channel_io_normal before the err_handler.slot_reset() callback. This is earlier than before the err_handler.resume() callback (Lukas Wunner) - Emit a BEGIN_RECOVERY uevent when driver's err_handler.error_detected() requests a reset, as well as when it says recovery is complete or can be done without a reset (Niklas Schnelle) - Align s390 with AER and EEH by emitting uevents during error recovery (Niklas Schnelle) - Align EEH with AER and s390 by emitting BEGIN_RECOVERY, SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the result of err_handler.error_detected() (Niklas Schnelle) - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES error information identifies a device without an AER Capability (Breno Leitao) - Update error decoding and TLP Log printing for new errors in current PCIe base spec (Lukas Wunner) - Update error recovery documentation to match the current code and use consistent nomenclature (Lukas Wunner) ASPM: - Enable all ClockPM and ASPM states for devicetree platforms, since there's typically no firmware that enables ASPM This is a risky change that may uncover hardware or configuration defects at boot-time rather than when users enable ASPM via sysfs later. Booting with "pcie_aspm=off" prevents this enabling (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) Power management: - If a device has already been disconnected, e.g., by a hotplug removal, don't bother trying to resume it to D0 when detaching the driver. This avoids annoying "Unable to change power state from D3cold to D0" messages (Mario Limonciello) - Ensure devices are powered up before config reads for 'max_link_width', 'current_link_speed', 'current_link_width', 'secondary_bus_number', and 'subordinate_bus_number' sysfs files. This prevents using invalid data (~0) in drivers or lspci and, depending on how the PCIe controller reports errors, may avoid error interrupts or crashes (Brian Norris) Virtualization: - Add rescan/remove locking when enabling/disabling SR-IOV, which avoids list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) Peer-to-peer DMA: - Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) Endpoint framework: - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Fix array underflow in endpoint BAR test case (Dan Carpenter) - Skip endpoint IRQ test if the IRQ is out of range to avoid false errors (Christian Bruel) - Fix endpoint test case for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the endpoint doorbell test case can be run more than once (Niklas Cassel) - Avoid a NULL pointer dereference when releasing DMA channels in endpoint DMA test case (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) AMD MDB PCIe controller driver: - Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for PERST# being described in a Root Port stanza, falling back to the host bridge if not found there (Sai Krishna Musham) Freescale i.MX6 PCIe controller driver: - Enable the 3.3V Vaux supply if available so devices can request wakeup with either Beacon or WAKE# (Richard Zhu) MediaTek PCIe Gen3 controller driver: - Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) NVIDIA Tegra PCIe controller driver: - When asserting PERST#, disable the controller instead of mistakenly disabling the PLL twice (Nagarjuna Kristam) - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) Qualcomm PCIe controller driver: - Select PCI Power Control Slot driver so slot voltage rails can be turned on/off if described in Root Port devicetree node (Qiang Yu) - Parse only PCI bridge child nodes in devicetree, skipping unrelated nodes such as OPP (Operating Performance Points), which caused probe failures (Krishna Chaitanya Chundru) - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang) - Consolidate Root Port 'phy' and 'reset' properties in struct qcom_pcie_port, regardless of whether we got them from the Root Port node or the host bridge node (Manivannan Sadhasivam) - Fetch and map the ELBI register space in the DWC core rather than in each driver individually (Krishna Chaitanya Chundru) - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift Feature' and use this in the qcom driver (Krishna Chaitanya Chundru) - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya Chundru) - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm Glymur, which is compatible with X1E80100 but doesn't have the cnoc_sf_axi clock (Qiang Yu) Renesas R-Car PCIe controller driver: - Fix a typo that prevented correct PHY initialization (Marek Vasut) - Add a missing 1ms delay after PWR reset assertion as required by the V4H manual (Marek Vasut) - Assure reset has completed before DBI access to avoid SError (Marek Vasut) - Fix inverted PHY initialization check, which sometimes led to timeouts and failure to start the controller (Marek Vasut) - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a regression when converting to msi_create_parent_irq_domain() (Claudiu Beznea) - Drop the spinlock protecting the PMSR register - it's no longer required since pci_lock already serializes accesses (Marek Vasut) - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) SOPHGO PCIe controller driver: - Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the SOPHGO SG2042 PCIe controller (Chen Wang) STMicroelectronics STM32MP25 PCIe controller driver: - Update pinctrl documentation of initial states and use in runtime suspend/resume (Christian Bruel) - Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs it during resume (Christian Bruel) - Add devicetree bindings and drivers for the STMicroelectronics STM32MP25 in host and endpoint modes (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) - Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) TI J721E PCIe driver: - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth Vadapalli) - Power controller off before configuring the glue layer so the controller latches the correct values on power-on (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits with error (Siddharth Vadapalli) - Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe devices to specific regions of host memory, to the ti,am65 binding (Jan Kiszka) Xilinx NWL PCIe controller driver: - Clear bootloader E_ECAM_CONTROL before merging in the new driver value to avoid writing invalid values (Jani Nurminen)" * tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits) PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings PCI: stm32: Add PCIe host support for STM32MP25 PCI: xilinx-nwl: Fix ECAM programming PCI: j721e: Fix incorrect error message in probe() PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller PCI: dwc: Support 16-lane operation PCI: Add lockdep assertion in pci_stop_and_remove_bus_device() PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0() PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock PCI: rcar-gen4: Fix inverted break condition in PHY initialization PCI: rcar-gen4: Assure reset occurs before DBI access PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion PCI: Set up bridge resources earlier PCI: rcar-host: Drop PMSR spinlock ...

Merge patch series "Update lpfc to revision 14.4.0.11"

2025-09-17T02:20:57Z

Justin Tee says: Update lpfc to revision 14.4.0.11 This patch set contains clean up of unused members in various structs, bug fixes related to discovery and resource allocation, and updates to handling of debugfs entries. The patches were cut against Martin's 6.18/scsi-queue tree. Signed-off-by: Martin K. Petersen

scsi: lpfc: Remove ndlp kref decrement clause for F_Port_Ctrl in lpfc_cleanup

2025-09-17T02:19:59Z

In lpfc_cleanup, there is an extraneous nlp_put for NPIV ports on the F_Port_Ctrl ndlp object. In cases when an ABTS is issued, the outstanding kref is needed for when a second XRI_ABORTED CQE is received. The final kref for the ndlp is designed to be decremented in lpfc_sli4_els_xri_aborted instead. Also, add a new log message to allow for future diagnostics when debugging related issues. Signed-off-by: Justin Tee Message-ID: <20250915180811.137530-5-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen