kernel/drivers/scsi/lpfc/lpfc_disc.h, branch linux-6.5.y

scsi: lpfc: Fix multiple NVMe remoteport registration calls for the same NPort ID

2022-09-16T02:18:27Z

When a target makes the mistake of registering a FC4 type with the fabric, but then rejects a PRLI of that type, the lpfc driver incorrectly retries the PRLI causing multiple registrations with the transport. The driver needs to detect the reject reason data and stop any retry. Rework the PRLI reject scenarios. Link: https://lore.kernel.org/r/20220911221505.117655-6-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Copyright updates for 14.2.0.6 patches

2022-09-01T03:39:58Z

Update copyrights to 2022 for files modified in the 14.2.0.6 patch set. Link: https://lore.kernel.org/r/20220819011736.14141-8-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Remove SANDiags related code

2022-09-01T03:39:58Z

The SANDiags feature is unused, and related code is removed. Link: https://lore.kernel.org/r/20220819011736.14141-6-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss

2021-10-21T03:33:46Z

A link bounce to a slow fabric may observe FDISC response delays lasting longer than devloss tmo. Current logic decrements the final fabric node kref during a devloss tmo event. This results in a NULL ptr dereference crash if the FDISC completes for that fabric node after devloss tmo. Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when devloss tmo triggers and we've noticed that fabric node recovery has already started or finished in between the time lpfc_dev_loss_tmo_callbk queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then the driver reverses the devloss tmo marked kref put with a kref get. If fabric node recovery fails, then the final kref put relies on the ELS timing out or the REG_LOGIN cmpl routine. Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes

2021-07-19T02:30:37Z

On an RSCN event, the nodes specified in RSCN payload and in MAPPED state are moved to NPR state in order to revalidate the login. This triggers an immediate unregister from SCSI/NVMe backend. The assumption is that the node may be missing. The re-registration with the backend happens after either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or when ADISC completes successfully (rediscover with ADISC enabled). However, the NVMe-FC standard provides for an RSCN to be triggered when the remote port supports a discovery controller and there was a change of discovery log content. As the remote port typically also supports storage subsystems, this unregister causes all storage controller connections to fail and require reconnect. Correct by reworking the code to ensure that the unregistration only occurs when a login state is truly terminated, thereby leaving the NVMe storage controllers in place. The changes made are: - Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry. - Do not clear wwpn/wwnn values upon ADISC failure. - Move MAPPED nodes to NPR during RSCN processing, but do not unregister with transport. On GIDFT completion, identify missing nodes (not marked NLP_NPR_2B_DISC) and unregister them. - Perform unregistration for nodes that will go through ADISC processing if ADISC completion fails. - Successful ADISC completion will move node back to MAPPED state. Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: vmid: Add datastructure for supporting VMID in lpfc

2021-06-10T14:01:32Z

Add the primary datastructures needed to implement VMID in the lpfc driver. Maintain the capability, current state, and hash table for the vmid/appid along with other information. This implementation supports the two versions of vmid implementation (app header and priority tagging). Link: https://lore.kernel.org/r/20210608043556.274139-5-muneendra.kumar@broadcom.com Reviewed-by: Hannes Reinecke Signed-off-by: Gaurav Srivastava Signed-off-by: James Smart Signed-off-by: Muneendra Kumar Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix node handling for Fabric Controller and Domain Controller

2021-05-22T03:23:28Z

During link bounce testing, RPI counts were seen to differ from the number of nodes. For fabric and domain controllers, a temporary RPI is assigned, but the code isn't registering it. If the nodes do go away, such as on link down, the temporary RPI isn't being released. Change the way these two fabric services are managed, make them behave like any other remote port. Register the RPI and register with the transport. Never leave the nodes in a NPR or UNUSED state where their RPI is in limbo. This allows them to follow normal dev_loss_tmo handling, RPI refcounting, and normal removal rules. It also allows fabric I/Os to use the RPI for traffic requests. Note: There is some logic that still has a couple of exceptions when the Domain controller (0xfffcXX). There are cases where the fabric won't have a valid login but will send RDP. Other times, it will it send a LOGO then an RDP. It makes for ad-hoc behavior to manage the node. Exceptions are documented in the code. Link: https://lore.kernel.org/r/20210514195559.119853-7-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Update copyrights for 12.8.0.7 and 12.8.0.8 changes

2021-03-04T22:37:06Z

For the files modified in 2021 via the 12.8.0.7 and 12.8.0.8 patch sets, update the copyright for 2021. Link: https://lore.kernel.org/r/20210301171821.3427-23-jsmart2021@gmail.com Co-developed-by: Dick Kennedy Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix stale node accesses on stale RRQ request

2021-03-04T22:37:04Z

Whenever an RRQ needs to be triggered, the DID from the node structure and node pointer are stored in the RRQ data structure and the RRQ is scheduled for later transmission. However, at the point in time that the timer triggers, there's no validation on the node pointer. Reference counters may have freed the structure. Additionally the DID in the node may no longer be valid. Fix by not tracking the node pointer in the RRQ, only the DID. At the time of the timer expiration, look up the node with the did and if present, send the RRQ. If no node exists, no need to send the RRQ. Link: https://lore.kernel.org/r/20210301171821.3427-5-jsmart2021@gmail.com Co-developed-by: Dick Kennedy Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix crash when nvmet transport calls host_release

2021-01-08T04:02:37Z

When lpfc is running in NVMET mode and supports the NVME-1 addendum changes, a LIP on a bound NVME Initiator or lipping the lpfc NVMET's link resulted in an Oops in lpfc_nvmet_host_release. The fix requires lpfc NVMET to maintain an additional reference on any node structure that acts as the hosthandle for the NVMET transport. This reference get is a one-time addition, is taken prior to the upcall of an unsolicited LS_REQ, and is released when the NVMET transport releases the hosthandle during the host_release downcall. Link: https://lore.kernel.org/r/20210104180240.46824-13-jsmart2021@gmail.com Co-developed-by: Dick Kennedy Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen