kernel/drivers/scsi/isci/task.h, branch linux-6.9.y

scsi: libsas: Delete lldd_clear_aca callback

2022-02-19T20:59:34Z

This callback is never called, so remove support. Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com Tested-by: Yihang Li Tested-by: Damien Le Moal Reviewed-by: Jack Wang Reviewed-by: Christoph Hellwig Reviewed-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: isci: Remove a declaration

2021-10-17T01:31:44Z

There is no function with the name isci_queuecommand(). Hence remove the declaration for isci_queuecommand(). Link: https://lore.kernel.org/r/20211007204618.2196847-12-bvanassche@acm.org Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

libsas: remove task_collector mode

2014-11-27T15:40:24Z

The task_collector mode (or "latency_injector", (C) Dan Willians) is an optional I/O path in libsas that queues up scsi commands instead of directly sending it to the hardware. It generall increases latencies to in the optiomal case slightly reduce mmio traffic to the hardware. Only the obsolete aic94xx driver and the mvsas driver allowed to use it without recompiling the kernel, and most drivers didn't support it at all. Remove the giant blob of code to allow better optimizations for scsi-mq in the future. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Acked-by: Dan Williams

isci: Redesign device suspension, abort, cleanup.

2012-05-17T21:33:38Z

This commit changes the means by which outstanding I/Os are handled for cleanup. The likelihood is that this commit will be broken into smaller pieces, however that will be a later revision. Among the changes: - All completion structures have been removed from the tmf and abort paths. - Now using one completed I/O list, with the I/O completed in host bit being used to select error or normal callback paths. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams

[SCSI] isci: remove bus and reset handlers

2012-02-29T21:16:05Z

Remove ->eh_device_reset_handler() and ->eh_bus_reset_handler() for the same reason they are not implemented for libata hosts, they cannot be implemented reliably with ata-eh. ATA error recovery wants to divert all resets to the eh thread and wait for completion, these handlers may be invoked from a non-blocking ioctl. The other path they are called from is libsas-eh, and if we escalate past I_T_nexus reset we have larger problems i.e. tear down all in-flight commands in the domain potentially without notification to the lldd if it has chosen not to implement ->lldd_clear_nexus_port() / ->lldd_clear_nexus_ha(). Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] isci: stop interpreting ->lldd_lu_reset() as an ata soft-reset

2012-02-29T21:13:40Z

Driving resets from libsas-eh is pre-mature as libata will make a decision about performing a softreset. Currently libata determines whether to perform a softreset based on ata_eh_followup_srst_needed(), and none of those conditions apply to isci. Remove the srst implementation and translate ->lldd_lu_reset() for ata devices as a request to drive a reset via libata-eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] libsas: remove ata_port.lock management duties from lldds

2012-02-19T19:50:12Z

Each libsas driver (mvsas, pm8001, and isci) has invented a different method for managing the ap->lock. The lock is held by the ata ->queuecommand() path. mvsas drops it prior to acquiring any internal locks which allows it to hold its internal lock across calls to task->task_done(). This capability is important as it is the only way the driver can flush task->task_done() instances to guarantee that it no longer has any in-flight references to a domain_device at ->lldd_dev_gone() time. Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] isci: remove unused 'isci_tmf->device' field

2012-01-16T07:44:15Z

As the field was never set, isci_print_tmf() using 'isci_tmf->device' sometimes causes a kernel crash if the dev_dbg() statement is enabled. Remove the unused field both from isci_tmf struct definition and from isci_print_tmf() Signed-off-by: Maciej Trela Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] isci: Fix task management for SMP, SATA and on dev remove.

2011-10-31T09:17:48Z

libsas uses the LLDD abort task interface to handle I/O timeouts in the SATA/STP and SMP discovery paths, so this change will terminate STP/SMP requests. Also, if the device is gone, the lldd will prevent libsas from further escalations in the error handler. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] isci: Handle task request timeouts correctly.

2011-10-31T09:16:23Z

In the case where "task" requests timeout (note that this class of requests can also include SATA/STP soft reset FIS transmissions), handle the case where the task was being managed by some call to terminate the task request by completing both the tmf and the aborting process. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: James Bottomley