kernel/drivers/scsi/aacraid/rx.c, branch linux-6.9.y

scsi: aacraid: Fix misspelling of _aac_rx_init()

2021-03-16T02:14:53Z

Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:544: warning: expecting prototype for aac_rx_init(). Prototype was for _aac_rx_init() instead Link: https://lore.kernel.org/r/20210303144631.3175331-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: "PMC-Sierra, Inc" Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Martin K. Petersen

scsi: aacraid: Fill in the very parameter descriptions for rx_sync_cmd()

2020-07-15T21:25:14Z

... and document aac_rx_ioremap() 'dev' param. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p5' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p6' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'status' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r1' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Excess function parameter 'ret' description in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:450: warning: Function parameter or member 'dev' not described in 'aac_rx_ioremap' Link: https://lore.kernel.org/r/20200713080001.128044-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions Cc: "PMC-Sierra, Inc" Signed-off-by: Lee Jones Signed-off-by: Martin K. Petersen

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18

2019-05-21T09:28:46Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Jilayne Lovejoy Reviewed-by: Steve Winslow Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de Signed-off-by: Greg Kroah-Hartman

scsi: aacraid: stop using deprated get_seconds()

2018-06-26T15:57:01Z

get_seconds() can overflow on 32-bit architectures and is deprecated because of that. The use in the aacraid driver has the same problem due to a limited firmware interface, it also overflows in the year 2106. This changes all calls to get_seconds() to the non-deprecated ktime_get_real_seconds(), which unfortunately doesn't solve that problem but gets rid of one user of the deprecated interface. [mkp: checkpatch] Signed-off-by: Arnd Bergmann Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen

scsi: aacraid: Perform initialization reset only once

2017-11-21T03:32:00Z

Currently the driver accepts two ways of requesting an initialization reset on the adapter: by passing aac_reset_devices module parameter, or the generic kernel parameter reset_devices. It's working as intended...but if we end up reaching a scsi hang and the scsi EH mechanism takes place, aacraid performs resets as part of the scsi error recovery procedure. These EH routines might reinitialize the device, and if we have provided some of the reset parameters in the kernel command-line, we again perform an "initialization" reset. So, to avoid this duplication of resets in case of scsi EH path, this patch adds a field to aac_dev struct to keep per-adapter track of the init reset request - once it's done, we set it to false and don't proactively reset anymore in case of reinitializations. Signed-off-by: Guilherme G. Piccoli Reviewed-by: Raghava Aditya Renukunta Signed-off-by: Martin K. Petersen

scsi: aacraid: pci_alloc_consistent() failures on ARM64

2017-04-26T22:28:06Z

There were pci_alloc_consistent() failures on ARM64 platform. Use dma_alloc_coherent() with GFP_KERNEL flag DMA memory allocations. Signed-off-by: Mahesh Rajashekhara [hch: tweaked indentation, removed memsets] Signed-off-by: Christoph Hellwig Acked-by: Dave Carroll Signed-off-by: Martin K. Petersen

scsi: aacraid: Fix camel case

2017-02-22T23:41:41Z

Replaced camel case with snake case for init supported options. Suggested-by: Johannes Thumshirn Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: aacraid: Update copyrights

2017-02-03T15:35:04Z

Added new copyright messages Signed-off-by: Raghava Aditya Renukunta Signed-off-by: Dave Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: aacraid: Added new IWBR reset

2017-02-03T15:35:04Z

Added a new IWBR soft reset type, reworked the IOP reset interface for a bit. Signed-off-by: Raghava Aditya Renukunta Signed-off-by: Dave Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: aacraid: added support for init_struct_8

2017-02-03T15:35:03Z

This patch lays the groundwork for supporting the new HBA-1000 controller family.A new INIT structure INIT_STRUCT_8 has been added which allows for a variable size for MSI-x vectors among other things, and is used for both Series-8, HBA-1000 and SmartIOC-2000. Signed-off-by: Raghava Aditya Renukunta Signed-off-by: Dave Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen