kernel/drivers/s390/crypto, branch linux-5.1.y

s390/zcrypt: Fix wrong dispatching for control domain CPRBs

2019-06-22T06:09:12Z

[ Upstream commit 7379e652797c0b9b5f6caea1576f2dff9ce6a708 ] The zcrypt device driver does not handle CPRBs which address a control domain correctly. This fix introduces a workaround: The domain field of the request CPRB is checked if there is a valid domain value in there. If this is true and the value is a control only domain (a domain which is enabled in the crypto config ADM mask but disabled in the AQM mask) the CPRB is forwarded to the default usage domain. If there is no default domain, the request is rejected with an ENODEV. This fix is important for maintaining crypto adapters. For example one LPAR can use a crypto adapter domain ('Control and Usage') but another LPAR needs to be able to maintain this adapter domain ('Control'). Scenarios like this did not work properly and the patch enables this. Signed-off-by: Harald Freudenberger Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin

s390: zcrypt: initialize variables before_use

2019-05-31T13:43:35Z

[ Upstream commit 913140e221567b3ecd21b4242257a7e3fa279026 ] The 'func_code' variable gets printed in debug statements without a prior initialization in multiple functions, as reported when building with clang: drivers/s390/crypto/zcrypt_api.c:659:6: warning: variable 'func_code' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:725:29: note: uninitialized use occurs here trace_s390_zcrypt_rep(mex, func_code, rc, ^~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:659:2: note: remove the 'if' if its condition is always false if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:654:24: note: initialize the variable 'func_code' to silence this warning unsigned int func_code; ^ Add initializations to all affected code paths to shut up the warning and make the warning output consistent. Signed-off-by: Arnd Bergmann Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

s390/pkey: add one more argument space for debug feature entry

2019-04-15T07:25:15Z

The debug feature entries have been used with up to 5 arguents (including the pointer to the format string) but there was only space reserved for 4 arguemnts. So now the registration does reserve space for 5 times a long value. This fixes a sometime appearing weired value as the last value of an debug feature entry like this: ... pkey_sec2protkey zcrypt_send_cprb (cardnr=10 domain=12) failed with errno -2143346254 Signed-off-by: Harald Freudenberger Reported-by: Christian Rund Signed-off-by: Martin Schwidefsky

s390/zcrypt: fix possible deadlock situation on ap queue remove

2019-04-10T15:46:24Z

With commit 01396a374c3d ("s390/zcrypt: revisit ap device remove procedure") the ap queue remove is now a two stage process. However, a del_timer_sync() call may trigger the timer function which may try to lock the very same spinlock as is held by the function just initiating the del_timer_sync() call. This could end up in a deadlock situation. Very unlikely but possible as you need to remove an ap queue at the exact sime time when a timeout of a request occurs. Signed-off-by: Harald Freudenberger Reported-by: Pierre Morel Fixes: commit 01396a374c3d ("s390/zcrypt: revisit ap device remove procedure") Signed-off-by: Martin Schwidefsky

zcrypt: handle AP Info notification from CHSC SEI command

2019-03-11T17:16:42Z

The current AP bus implementation periodically polls the AP configuration to detect changes. When the AP configuration is dynamically changed via the SE or an SCLP instruction, the changes will not be reflected to sysfs until the next time the AP configuration is polled. The CHSC architecture provides a Store Event Information (SEI) command to make notification of an AP configuration change. This patch introduces a handler to process notification from the CHSC SEI command by immediately kicking off an AP bus scan-after-event. Signed-off-by: Tony Krowiak Reviewed-by: Halil Pasic Reviewed-by: Sebastian Ott Reviewed-by: Harald Freudenberger Reviewed-by: Cornelia Huck Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/zcrypt: revisit ap device remove procedure

2019-03-06T08:34:03Z

Working with the vfio-ap driver let to some revisit of the way how an ap (queue) device is removed from the driver. With the current implementation all the cleanup was done before the driver even got notified about the removal. Now the ap queue removal is done in 3 steps: 1) A preparation step, all ap messages within the queue are flushed and so the driver does 'receive' them. Also a new state AP_STATE_REMOVE assigned to the queue makes sure there are no new messages queued in. 2) Now the driver's remove function is invoked and the driver should do the job of cleaning up it's internal administration lists or whatever. After 2) is done it is guaranteed, that the driver is not invoked any more. On the other hand the driver has to make sure that the APQN is not accessed any more after step 2 is complete. 3) Now the ap bus code does the job of total cleanup of the APQN. A reset with zero is triggered and the state of the queue goes to AP_STATE_UNBOUND. After step 3) is complete, the ap queue has no pending messages and the APQN is cleared and so there are no requests and replies lingering around in the firmware queue for this APQN. Also the interrupts are disabled. After these remove steps the ap queue device may be assigned to another driver. Stress testing this remove/probe procedure showed a problem with the correct module reference counting. The actual receive of an reply in the driver is done asynchronous with completions. So with a driver change on an ap queue the message flush triggers completions but the threads waiting for the completions may run at a time where the queue already has the new driver assigned. So the module_put() at receive time needs to be done on the driver module which queued the ap message. This change is also part of this patch. Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Signed-off-by: Martin Schwidefsky

Merge tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2019-03-05T19:13:10Z

Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...

s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem

2019-02-22T08:20:01Z

Libudev relies on having a subsystem link for non-root devices. To avoid libudev (and potentially other userspace tools) choking on the matrix device let us introduce a matrix bus and with it the matrix bus subsytem. Also make the matrix device reside within the matrix bus. Doing this we remove the forced link from the matrix device to the vfio_ap driver and the device_type we do not need anymore. Since the associated matrix driver is not the vfio_ap driver any more, we have to change the search for the devices on the vfio_ap driver in the function vfio_ap_verify_queue_reserved. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Cc: stable@vger.kernel.org Reported-by: Marc Hartmayer Reported-by: Christian Borntraeger Signed-off-by: Pierre Morel Tested-by: Christian Borntraeger Reviewed-by: Cornelia Huck Reviewed-by: Tony Krowiak Acked-by: Halil Pasic Signed-off-by: Martin Schwidefsky

pkey: Indicate old mkvp only if old and current mkvp are different

2019-02-21T14:57:23Z

When the CCA master key is set twice with the same master key, then the old and the current master key are the same and thus the verification patterns are the same, too. The check to report if a secure key is currently wrapped by the old master key erroneously reports old mkvp in this case. Reviewed-by: Harald Freudenberger Signed-off-by: Ingo Franzki Signed-off-by: Martin Schwidefsky

s390/zcrypt: use new state UNBOUND during queue driver rebind

2019-02-13T07:27:44Z

When an alternate driver (vfio-ap) has bound an ap queue and this binding is revised the ap queue device is in an intermittent state not bound to any driver. The internal state variable covered this with the state AP_STATE_BORKED which is also used to reflect broken devices. When now an ap bus scan runs such a device is destroyed and on the next scan reconstructed. So a stress test with high frequency switching the queue driver between the default and the vfio-ap driver hit this gap and the queue was removed until the next ap bus scan. This fix now introduces another state for the in-between condition for a queue momentary not bound to a driver and so the ap bus scan function skips this device instead of removing it. Also some very slight but maybe helpful debug feature messages come with this patch - in particular a message showing that a broken card/queue device will get removed. Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Signed-off-by: Martin Schwidefsky