kernel/drivers/s390/char/con3215.c, branch linux-6.9.y

s390/3215: use new address translation helpers

2024-03-13T08:23:47Z

Use virt_to_dma32() and friends to properly convert virtual to physical and physical to virtual addresses so that "make C=1" does not generate any warnings anymore. Signed-off-by: Heiko Carstens

tty: con3215: convert to u8 and size_t

2023-12-08T11:02:37Z

Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: linux-s390@vger.kernel.org Link: https://lore.kernel.org/r/20231206073712.17776-9-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: con3215: drop raw3215_info::ubuffer

2023-11-23T19:16:03Z

clang-struct [1] found raw3215_info::ubuffer unused. It's actually not used since 2004 when we switched to kernel buffers. [1] https://github.com/jirislaby/clang-struct Signed-off-by: "Jiri Slaby (SUSE)" Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: linux-s390@vger.kernel.org Acked-by: Alexander Gordeev Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231121103626.17772-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: make tty_operations::write()'s count size_t

2023-08-11T19:12:46Z

Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: propagate u8 data to tty_operations::put_char()

2023-08-11T19:12:46Z

Data are now typed as u8. Propagate this change to tty_operations::put_char(). Signed-off-by: "Jiri Slaby (SUSE)" Cc: Geert Uytterhoeven Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: Karsten Keil Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Mathias Nyman Link: https://lore.kernel.org/r/20230810091510.13006-29-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: propagate u8 data to tty_operations::write()

2023-08-11T19:12:46Z

Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: Richard Weinberger Cc: Anton Ivanov Cc: Johannes Berg Cc: Chris Zankel Cc: Max Filippov Cc: Arnd Bergmann Cc: Vaibhav Gupta Cc: Jens Taprogge Cc: Karsten Keil Cc: Scott Branden Cc: Ulf Hansson Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Arnaud Pouliquen Cc: Oliver Neukum Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

s390: include linux/io.h instead of asm/io.h

2023-07-03T09:19:40Z

Include linux/io.h instead of asm/io.h everywhere. linux/io.h includes asm/io.h, so this shouldn't cause any problems. Instead this might help for some randconfig build errors which were reported due to some undefined io related functions. Also move the changed include so it stays grouped together with other includes from the same directory. For ctcm_mpc.c also remove not needed comments (actually questions). Acked-by: Christian Borntraeger Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev

tty: Cleanup tty_port_set_initialized() bool parameter

2023-01-19T15:04:34Z

Make callers pass true/false consistently for bool val. Reviewed-by: Samuel Iglesias Gonsalvez Reviewed-by: Jiri Slaby Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230117090358.4796-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

s390/con3215: Fix white space errors

2022-10-26T12:46:51Z

Adjust white space according to coding guidelines. Signed-off-by: Thomas Richter Signed-off-by: Vasily Gorbik

s390/con3215: Drop console data printout when buffer full

2022-10-26T12:46:51Z

Using z/VM the 3270 terminal emulator also emulates an IBM 3215 console which outputs line by line. When the screen is full, the console enters the MORE... state and waits for the operator to confirm the data on the screen by pressing a clear key. If this does not happen in the default time frame (currently 50 seconds) the console enters the HOLDING state. It then waits another time frame (currently 10 seconds) before the output continues on the next screen. When the operator presses the clear key during these wait times, the output continues immediately. This may lead to a very long boot time when the console has to print many messages, also the system may hang because of the console's limited buffer space and the system waits for the console output to drain and finally to finish. This problem can only occur when a terminal emulator is actually connected to the 3215 console driver. If not z/VM simply drops console output. Remedy this rare situation and add a kernel boot command line parameter con3215_drop. It can be set to 0 (do not drop) or 1 (do drop) which is the default. This instructs the kernel drop console data when the console buffer is full. This speeds up the boot time considerable and also does not hang the system anymore. Add a sysfs attribute file for console IBM 3215 named con_drop. This allows for changing the behavior after the boot, for example when during interactive debugging a panic/crash is expected. Here is a test of the new behavior using the following test program: #/bin/bash declare -i cnt=4 mode=$(cat /sys/bus/ccw/drivers/3215/con_drop) [ $mode = yes ] && cnt=25 echo "cons_drop $(cat /sys/bus/ccw/drivers/3215/con_drop)" echo "vmcp term more 5 2" vmcp term more 5 2 echo "Run $cnt iterations of "'echo t > /proc/sysrq-trigger' for i in $(seq $cnt) do echo "$i. command 'echo t > /proc/sysrq-trigger' at $(date +%F,%T)" echo t > /proc/sysrq-trigger sleep 1 done echo "droptest done" > /dev/kmsg # Output with sysfs attribute con_drop set to 1: # ./droptest.sh cons_drop yes vmcp term more 5 2 Run 25 iterations of echo t > /proc/sysrq-trigger 1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:09 2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:10 3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:11 4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:12 5. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:13 6. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:14 7. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:15 8. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:16 9. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:17 10. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:18 11. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:19 12. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:20 13. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:21 14. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:22 15. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:23 16. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:24 17. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:25 18. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:26 19. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:27 20. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:28 21. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:29 22. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:30 23. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:31 24. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:32 25. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:33 # There are no hangs anymore. Output with sysfs attribute con_drop set to 0 and identical setting for z/VM console 'term more 5 2'. Sometimes hitting the clear key at the x3270 console to progress output. # ./droptest.sh cons_drop no vmcp term more 5 2 Run 4 iterations of echo t > /proc/sysrq-trigger 1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:20:58 2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:24:32 3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:28:04 4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:31:37 # Details: Enable function raw3215_write() to handle tab expansion and newlines and feed it with input not larger than the console buffer of 65536 bytes. Function raw3125_putchar() just forwards its character for output to raw3215_write(). This moves tab to blank conversion to one function raw3215_write() which also does call raw3215_make_room() to wait for enough free buffer space. Function handle_write() loops over all its input and segments input into chunks of console buffer size (should the input be larger). Rework tab expansion handling logic to avoid code duplication. Signed-off-by: Thomas Richter Acked-by: Peter Oberparleiter Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik