kernel/drivers/s390/block/dasd_proc.c, branch linux-rolling-stable

s390/dasd: fix redundant /proc/dasd* entries removal

2024-11-10T03:06:58Z

In case of an early failure in dasd_init, dasd_proc_init is never called and /proc/dasd* files are never created. That can happen, for example, if an incompatible or incorrect argument is provided to the dasd_mod.dasd= kernel parameter. However, the attempted removal of /proc/dasd* files causes 8 warnings and backtraces in this case. 4 on the error path within dasd_init and 4 when the dasd module is unloaded. Notice the "removing permanent /proc entry 'devices'" message that is caused by the dasd_proc_exit function trying to remove /proc/devices instead of /proc/dasd/devices since dasd_proc_root_entry is NULL and /proc/devices is indeed permanent. Example: ------------[ cut here ]------------ removing permanent /proc entry 'devices' WARNING: CPU: 6 PID: 557 at fs/proc/generic.c:701 remove_proc_entry+0x22e/0x240 CPU: 6 PID: 557 Comm: modprobe Not tainted 6.10.5-1-default #1 openSUSE Tumbleweed f6917bfd6e5a5c7a7e900e0e3b517786fb5c6301 Hardware name: QEMU 8561 QEMU (KVM/Linux) Krnl PSW : 0704c00180000000 000003fffed0e9f2 (remove_proc_entry+0x232/0x240) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003ff00000027 000003ff00000023 0000000000000028 000002f200000000 000002f3f05bec20 0000037ffecfb7d0 000003ffffdabab0 000003ff7ee4ec72 000003ff7ee4ec72 0000000000000007 000002f280e22600 000002f280e22688 000003ffa252cfa0 0000000000010000 000003fffed0e9ee 0000037ffecfba38 Krnl Code: 000003fffed0e9e2: c020004e7017 larl %r2,000003ffff6dca10 000003fffed0e9e8: c0e5ffdfad24 brasl %r14,000003fffe904430 #000003fffed0e9ee: af000000 mc 0,0 >000003fffed0e9f2: a7f4ff4c brc 15,000003fffed0e88a 000003fffed0e9f6: 0707 bcr 0,%r7 000003fffed0e9f8: 0707 bcr 0,%r7 000003fffed0e9fa: 0707 bcr 0,%r7 000003fffed0e9fc: 0707 bcr 0,%r7 Call Trace: [<000003fffed0e9f2>] remove_proc_entry+0x232/0x240 ([<000003fffed0e9ee>] remove_proc_entry+0x22e/0x240) [<000003ff7ef5a084>] dasd_proc_exit+0x34/0x60 [dasd_mod] [<000003ff7ef560c2>] dasd_exit+0x22/0xc0 [dasd_mod] [<000003ff7ee5a26e>] dasd_init+0x26e/0x280 [dasd_mod] [<000003fffe8ac9d0>] do_one_initcall+0x40/0x220 [<000003fffe9bc758>] do_init_module+0x78/0x260 [<000003fffe9bf3a6>] __do_sys_init_module+0x216/0x250 [<000003ffff37ac9e>] __do_syscall+0x24e/0x2d0 [<000003ffff38cca8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003fffef7ea20>] __s390_indirect_jump_r14+0x0/0x10 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ While the cause is a user failure, the dasd module should handle the situation more gracefully. One of the simplest solutions is to make removal of the /proc/dasd* entries idempotent. Signed-off-by: Miroslav Franc [ sth: shortened if clause ] Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20241108133913.3068782-2-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: Remove PRINTK_HEADER and KMSG_COMPONENT definitions

2024-02-08T17:12:01Z

PRINTK_HEADER was mainly used to prefix log messages with the module name. Most components don't use this definition anymore. Either because there are no log messages being generated anymore, or pr_*() were replaced by dev_*(), which contains device and component information already. PRINTK_HEADER is also dropped in the function dasd_3990_erp_handle_match_erp() in dasd_3990_erp.c from a panic() call as panic() already provides all relevant information. KMSG_COMPONENT was mainly used to identify a component in a long gone kernel message catalog feature. Remove both definition since they're either not used or alternatives make the code slightly shorter and more readable. Signed-off-by: Jan Höppner Reviewed-by: Stefan Haberland Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240208164248.540985-9-sth@linux.ibm.com Signed-off-by: Jens Axboe

proc: convert everything to "struct proc_ops"

2020-02-04T03:05:26Z

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

s390/dasd: fix typo in copyright statement

2019-12-20T18:52:01Z

coypright -> copyright Reported-by: Kate Stewart Signed-off-by: Stefan Haberland Signed-off-by: Jens Axboe

s390/drivers: fix proc/debugfs file permissions

2018-12-13T09:42:24Z

Remove write permissions for fops without a write callback. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

proc: introduce proc_create_seq{,_data}

2018-05-16T05:23:35Z

Variants of proc_create{,_data} that directly take a struct seq_operations argument and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

s390/dasd: Change unsigned long long to unsigned long

2017-08-23T11:31:51Z

Unsigned long long and unsigned long were different in size for 31-bit. For 64-bit the size for both datatypes is 8 Bytes and since the support for 31-bit is long gone we can clean up a little and change everything to unsigned long. Change get_phys_clock() along the way to accept unsigned long as well so that the DASD code can be consistent. Acked-by: Heiko Carstens Signed-off-by: Jan Höppner Signed-off-by: Martin Schwidefsky

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

s390: Use pr_warn instead of pr_warning

2016-03-07T12:12:04Z

Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky