kernel/drivers/rtc, branch linux-6.5.y

rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call

2023-11-20T10:57:18Z

[ Upstream commit 2be36c09b6b07306be33519e1aa70d2e2a2161bb ] The current implementation passes PIN_IO_INTA_OUT (2) as a mask and PIN_IO_INTAPM (GENMASK(1, 0)) as a value. Swap the variables to assign mask and value the right way. This error was first introduced with the alarm support. For better or worse it worked as expected because 0x02 was applied as a mask to 0x03, resulting 0x02 anyway. This will of course not work for any other value. Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support") Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: pcf85363: Allow to wake up system without IRQ

2023-11-20T10:57:18Z

[ Upstream commit 1e786b03705938870dafb629f2248f88d507a0ff ] When wakeup-source is set in the devicetree, set up the device for using the output as interrupt instead of clock. This is similar to how other RTC devices handle this. This allows the clock chip to turn on the board when wired to do so in hardware. Signed-off-by: Mike Looijmans Link: https://lore.kernel.org/r/20230821072013.7072-1-mike.looijmans@topic.nl Signed-off-by: Alexandre Belloni Stable-dep-of: 2be36c09b6b0 ("rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call") Signed-off-by: Sasha Levin

rtc: brcmstb-waketimer: support level alarm_irq

2023-11-20T10:57:18Z

[ Upstream commit e005a9b35b464be5b2e0194f717e90e7e496785d ] Some devices (e.g. BCM72112) use an alarm_irq interrupt that is connected to a level interrupt controller rather than an edge interrupt controller. In this case, the interrupt cannot be left enabled by the irq handler while preserving the hardware wake-up signal on wake capable devices or an interrupt storm will occur. The alarm_expired flag is introduced to allow the disabling of the interrupt when an alarm expires and to support balancing the calls to disable_irq() and enable_irq() in accordance with the existing design. Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm") Signed-off-by: Doug Berger Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff

2023-09-06T20:22:22Z

commit 95e7ebc6823170256a8ce19fad87912805bfa001 upstream. ds1685_rtc_poweroff is only used externally via symbol_get, which was only ever intended for very internal symbols like this one. Use EXPORT_SYMBOL_GPL for it so that symbol_get can enforce only being used on EXPORT_SYMBOL_GPL symbols. Signed-off-by: Christoph Hellwig Acked-by: Joshua Kinard Reviewed-by: Greg Kroah-Hartman Signed-off-by: Luis Chamberlain Signed-off-by: Greg Kroah-Hartman

Merge tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2023-07-03T17:43:10Z

Pull RTC updates from Alexandre Belloni: "The isl1208 dirver was reworked tobe able to work as part of an MFD. All the Loongson chips are now supported through a new driver, the old one is removed. Summary: Subsystem: - Switch i2c drivers back to use .probe() - Constify pointers to hwmon_channel_info New driver: - Loongson on chip RTC, replacing the Loongson 1 only driver Drivers: - isl1208: cleanup and support for RAA215300 - st-lpc: cleanups - stm32: fix wakeup" * tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits) rtc: Add rtc driver for the Loongson family chips rtc: Remove the Loongson-1 RTC driver dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles rtc: rv3028: make rv3028 probeable from userspace rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300 rtc: isl1208: Add isl1208_set_xtoscb() rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[] rtc: isl1208: Make similar I2C and DT-based matching table rtc: isl1208: Drop name variable dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties dt-bindings: rtc: isl1208: Convert to json-schema rtc: st-lpc: Simplify clk handling in st_rtc_probe() rtc: st-lpc: Release some resources in st_rtc_probe() in case of error rtc: stm32: remove dedicated wakeup management dt-bindings: rtc: restrict node name suffixes rtc: add HAS_IOPORT dependencies rtc: Switch i2c drivers back to use .probe() rtc: rv3032: constify pointers to hwmon_channel_info rtc: isl12022: constify pointers to hwmon_channel_info rtc: ds3232: constify pointers to hwmon_channel_info ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2023-06-29T17:05:47Z

Pull clk updates from Stephen Boyd: "This batch of clk driver updates contains almost no new SoC support. Instead there's a treewide patch series from Maxime that makes clk_ops::determine_rate mandatory for muxes. Beyond that core framework change we have the usual pile of clk driver updates such as migrating i2c drivers to use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs. Overall the SoCs that got the most updates this time around in terms of diffstat are the Amlogic and Mediatek drivers because they added new SoC support or fixed up various drivers to have proper data. In general things look kinda quiet. I suspect the core framework change may still shake out some problems after the merge window, mostly because not everyone tests linux-next where that series has been for some number of weeks. I saw that there's at least one pending fix for Tegra that needs to be wrapped up into a proper patch. I'll try to catch those bits before the window closes so that -rc1 is bootable. More details below. Core: - Make clk_ops::determine_rate mandatory for muxes New Drivers: - Add amlogic a1 SoC family PLL and peripheral clock controller support Updates: - Handle allocation failures from kasprintf() and friends - Migrate platform clk drivers to .remove_new() - Migrate i2c clk drivers to .probe() instead of .probe_new() - Remove CLK_SET_PARENT from all Mediatek MSDC core clocks - Add infra_ao reset support for Mediatek MT8188 SoCs - Align driver_data to i2c_device_id tables in some i2c clk drivers - Use device_get_match_data() in vc5 clk driver - New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock drivers - Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT property in clk-pic32mzda - Convert AT91 clock dt-bindings to YAML - Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX - Keep i.MX UART clocks enabled during kernel boot if earlycon is set - Drop imx_unregister_clocks() as there are no users anymore - Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free - Add determine_rate op to the imx8m composite clock - Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN, i.MX8MP and i.MX93 clock controller drivers - Add missing interrupt DT property for the i.MX8M clock controller - Re-add support for Exynos4212 clock controller because we are re-introducing the SoC in the mainline - Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some objtool warnings - Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC - Convert the Renesas clock drivers to readl_poll_timeout_atomic() - Add PWM clock on Renesas R-Car V3U - Fix PLL5 on Renesas RZ/G2L and RZ/V2L" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits) clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro clk: Fix memory leak in devm_clk_notifier_register() clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes clk: mvebu: Use of_get_cpu_hwid() to read CPU ID MAINTAINERS: Add Marvell mvebu clock drivers clk: clocking-wizard: check return value of devm_kasprintf() clk: ti: clkctrl: check return value of kasprintf() clk: keystone: sci-clk: check return value of kasprintf() clk: si5341: free unused memory on probe failure clk: si5341: check return value of {devm_}kasprintf() clk: si5341: return error if one synth clock registration fails clk: cdce925: check return value of kasprintf() clk: vc5: check memory returned by kasprintf() clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks clk: keystone: syscon-clk: Add support for audio refclk dt-bindings: clock: Add binding documentation for TI Audio REFCLK dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible clk: keystone: syscon-clk: Allow the clock node to not be of type syscon ...

rtc: Add rtc driver for the Loongson family chips

2023-06-25T23:19:11Z

The Loongson family chips use an on-chip counter 0 (Time Of Year counter) as the RTC. We will refer to them as rtc-loongson. Cc: Keguang Zhang Cc: Yang Ling Cc: Jiaxun Yang Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen Signed-off-by: WANG Xuerui Reviewed-by: Keguang Zhang Tested-by: Keguang Zhang Reviewed-by: Jiaxun Yang Tested-by: Jiaxun Yang # LS7A Link: https://lore.kernel.org/r/0c5171156390f614d72f36ceb04a20f432ca639e.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni

rtc: Remove the Loongson-1 RTC driver

2023-06-25T23:19:11Z

Remove the ls1x-rtc driver as it is obsolete. We will continue to support the ls1x RTC in the upcoming Loongson unified RTC driver rtc-loongson. Cc: Keguang Zhang Cc: zhao zhang Cc: Yang Ling Signed-off-by: Binbin Zhou Acked-by: Keguang Zhang Link: https://lore.kernel.org/r/c38c666015a162d7031b20a48209ce577bab62cd.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni

rtc: rv3028: make rv3028 probeable from userspace

2023-06-25T23:05:13Z

With this commit, it will be possible to bind a rv3028 device from userspace This is done by: echo rtc-rv3028 0x52 > /sys/bus/i2c/devices/i2c-XX/new_device Signed-off-by: Johannes Kirchmair Link: https://lore.kernel.org/r/20230327085550.1721861-1-johannes.kirchmair@sigmatek.at Signed-off-by: Alexandre Belloni

rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300

2023-06-25T22:58:21Z

The built-in RTC found on PMIC RAA215300 is the same as ISL1208. However, the external oscillator bit is inverted on PMIC version 0x11. The PMIC driver detects PMIC version and instantiates the RTC device based on i2c_device_id. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20230623140948.384762-11-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni